Clear-Com Que Com Single Ear Headset Beltpack
Que Com Single Ear Headset/Beltpack (SMQ-1)
The SMQ-1 is a single ear headset for the Clear-Com Que-Com system.The Que-Com is a high-performance, economical party-line communications system offering a wide frequency response and high audio output and featuring a rugged, all-metal die cast beltpack with belt clip. The intercom provides an…
Call for availabilityClear-Com 6-Pin Line Splitter
Y Adapter For IFB Systems (YC-66)
One 6-pin male XLR connector splits into two 6-pin female connectors.
Call For AvailabilityClear-Com LQ-R2W4-4W4
8 Ch 4-Wire & partyline IP interface
The LQ-R2W4-4W4 enables the connection of both partyline and 4-wire audio over LAN, WAN or Internet IP infrastructures in a 1RU panel. LQ Series devices can also connect to Eclipse HXframes via the IVC-32-HX interface card over LAN, WAN and Internet. The partyline connections are compatible with…
Call For AvailabilityClear-Com LQ-R4W8
8 Ch 4-Wire IP interface
The LQ-R4W8 enables the connections of 4-wire audio devices over LAN, WAN or Internet IP infrastructures in a 1RUpanel. LQ Series devices can also connect to Eclipse HXframes via the IVC-32-HX interface card over LAN, WAN and Internet. Connect up to 6 panels together to create standalone intercom…
Call For AvailabilityClear-Com FSII-SPL
Antenna Splitter box w/ fiber option
The FSII-SPL is an antenna splitter that connects multiple FreeSpeak II transciever antennas to an Eclipse-HXmatrix (via an E-QUE-HX frame card) or to a FreeSpeak IIbase station. The splitter provides up to 5 antenna feeds from one antenna port. An SFP fiber slot allows a fiber link between a…
Call For AvailabilityClear-Com DX410-4UP
4-Up DX410 belt pack system w/ CC-15 headsets
The Clear-Com HME DX410 is a 2-channel Digital Wireless Intercom System that supports up to 15 COMMUNICATORs per base station, either Belt Packs or All-In-One Headsets, or a combination of the two. Using the DX410 in the 2-channel mode, any three of the 15 Communicators can operate in full duplex…
Call For AvailabilityClear-Com Single Channel Standard Beltpack
Single Channel Standard Beltpack (RS-701)
The RS-701 is a single-channel analog beltpack with an XLR-3 line connector and XLR-4M headset connector that combines high headroom with low-noise audio. The RS-701’s wide dynamic range and audio contouring enable intelligible voice communication with the “Clear-Com Sound” from…
In StockClear-Com FreeSpeak II FSII-TCVR-24 2.4 GHz Active Antenna
FreeSpeak II 2.4 GHz active antenna
The FSII-TCVR-24 is an active transceiver antenna for the FSII-BP24 beltpacks. The antenna can be locally powered or powered via the FSII-BASE or matrix on shorter connections (less than 1000ft). The FSII-TCVR-24 has a mount for wall or microphone stand. A blue status light is visible from either…
Call For AvailabilityClear-Com SB-704 Main Station
Encore 4-Ch Switchboard Main Station
The 704 series is Clear-Com’s most advanced party-line intercom system. Each station is a four-channel intercom with superior audio and versatile channel access to provide unmatched communication fexibility. All front-panel controls are intuitive and easy to operate. The station’s…
Call for availabilityClear-Com LQ-4W2
2 Ch, 4-Wire IP Communications Interface
The LQ-4W2 is a compact box that enable connection of 4-wire audio devices over LAN, WAN or Internet IP infrastructures. The LQ-4W2 can interconnect with devices, such as analog ports of any matrix intercom systems, analog telephone circuits, two-way radio gateways and audio consoles.Main…
Call For AvailabilityClear-Com CC-110-X4
LW Single-ear standard HS XLR-4F
The CC-110 is a single-ear premium light-weight headset that has high performance headphones and cardioid dynamic microphones that provide high quality audio. The headset has a flexible design and includes both a soft leatherette or foam ear pad for superior comfort.Main Features: • High quality…
In StockClear-Com GM-9 Plug-in Gooseneck Microphone
9" Plug-in Gooseneck Microphone (GM-9)
The Clear-Com GM-9 gooseneck microphone features a gold-plated and threaded 6.35mm/0.25" jack connector and is 230mm/9" long. The unidirectional electret condenser microphone element has side and rear rejection of greater than 6db between 100Hz and 10kHz. Includes a fitted windscreen.
Call for availabilityClear-Com Portable Power Supply
1 Channel 0.4 AMP Portable Power Supply (PK-7)
The Clear-Com PK-7 power supply is housed in a rugged metal chassis and can power up to 30 SMQ-1 or DMQ-2 headsets. It supplies 24 volts DC at .4 amp to the system. The fully regulated, current-limited unit also provides proper termination for the intercom system. The PK-7 features both…
Call for availabilityClear-Com TW-12C Interface
Clear-Com/RTS Encore™ Party-line System Interface
Clear-Com/RTS System Interface Rack Mount (1RU), connects Clear-Com to Clear-Com or Clear-Com to RTS systemsTW-12C connects a single channel of intercom from one system to another. Opt isolation eliminates hums and buzzes. Compensates for level and impedance differences between systems. Allows…
Call for availabilityClear-Com Wrap Around Light Headset
Wrap Around Light Headset XLR-4F (CC-27)
The Clear-Com CC-27 is a single-ear, wrap-around headset with a contemporary design that offers great comfort during prolonged use. Its dynamic noise cancellation microphone delivers excellent frequency response and accurate voice pick-up. 200ohm dynamic noise cancellation microphone with 150Hz to…
In StockClear-Com Encore 4-Ch Interface
Encore 4-Ch 4-Wire Interface (IF4W4)
The Clear-Com IF4W4 modular 4-wire interface connects camera intercoms, two-way radios, fiber optic circuits, and other 4-wire devices to a standard Clear-Com intercom line. The 1-RU chassis holds up to four individual interface modules, each with its own 4-wire terminal block and XLR-3M connector…
Call for availabilityClear-Com 2 Channel Portable Headset Main Station
2 Channel Portable Headset Main Station (CS-702)
The Clear-Com Encore intercom system delivers superb audio performance while offering a streamlined, user-intuitive design. All components are built to handle the roughest use in fast-paced, high-intensity applications. Even under the most challenging conditions, the noise attenuating headsets and…
Call for availabilityClear-Com RS-703 2 Channel Beltpack
2 Channel 3-Pin Dual Listen Mono Beltpack (RS-703)
The RS-703 is a two-channel analog beltpack with an XLR-3 line connector and XLR-4M headset connector that combines high headroom with low-noise audio. The RS-703’s wide dynamic range and audio contouring enable intelligible voice communication with the “Clear-Com Sound” from…
Call For AvailabilityClear-Com 2 Channel Headset - Speaker Station
2 Channel Headset/Speaker Station Rack Mount (1RU) (RM-702)
The Clear-Com Encore intercom system delivers superb audio performance while offering a streamlined, user-intuitive design. All components are built to handle the roughest use in fast-paced, high-intensity applications. Even under the most challenging conditions, the noise attenuating headsets and…
Call for availabilityClear-Com 2 Channel Headset - Speaker Main Station
2 Channel Headset/Speaker Main Station (MS-702)
The Clear-Com Encore intercom system delivers superb audio performance while offering a streamlined, user-intuitive design. All components are built to handle the roughest use in fast-paced, high-intensity applications. Even under the most challenging conditions, the noise attenuating headsets and…
Call for availabilityClear-Com 2 Channel Rack Mount Power Supply
2 Channel Rack Mount Power Supply (PS-702)
The 1-RU Clear-Com PS-702 can supply up to 2 amps at 30 volts DC to two channels. This is sufficient to power up to 40 beltpacks, 10 speaker stations or 12 headset stations even under the most demanding conditions. Either channel is capable of supplying up to 1.2 amps. The full current capacity may…
Call for availabilityClear-Com LQ-4WG2
2 Ch 4-Wire GPIO IP interface
The LQ-4WG2 is a compact box that enable connection of 4-wire with GPIO audio over LAN, WAN or Internet IP infrastructures. LQ Series devices can also connect to Eclipse HXframes via the IVC-32-HX interface card over LAN, WAN and Internet. The LQ-4WG2 can interconnect with devices, such as analog…
Call For AvailabilityClear-Com RS-702 Dual Channel Beltback
2 Channel Standard Dual Listen Monaural Beltpack (RS-702)
Description The RS-702 is a two-channel analog beltpack with an XLR-6 line connector and XLR-4M headset connector. A mic preamp with a dynamic range of 130 db enables intelligible voice communication for every volume level, from a whisper to a shout. The beltpack also combines high headroom,…
In StockClear-Com Fiber Interface Module
Fiber Interface Module (HLI-FBS)
HelixNet Main Stations accept linking as well as two-wire and four-wire optional interface modules, offering seamless connectivity to LAN and virtually all common two-wire and four-wire audio systems. The HLI-FBS Fiber Linking Module provides a daisy-chain fiber interface to connect to other…
Call For AvailabilityClear-Com Double Ear Monaural Headset
Double Ear Monaural Headset XLR-4F (CC-60)
The Clear-Com CC-60 is a double-ear enclosed general-purpose intercom headset featuring leatherette ear pads and a flexible, dynamic neck microphone. It offers a durable design with comfort and excellent audio isolation. Fitted with a 4 Pin Female XLR connector.Clear-Com CC-60…
Call for availability