Products, DBX

DBX 286S
Mic Preamp / Processor

The dbx 286s microphone processor is a direct replacement for the renowned dbx 286A, offering the same exceptional sound quality, rugged reliability and great value, but updated with a new sleek, silver face plate and the latest electronic components for even better performance.The 286s is a…

DBX 231S
Dual Graphic Equalizer

The dbx 231s dual 31-Band Graphic EQ can handle the most demanding sound reinforcement environments, while offering exceptional ease-of-use.It boasts dual 31-band channels of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an…

DBX 131S
Single Graphic Equalizer

The dbx 131s single 31-Band Graphic EQ can handle the most demanding sound reinforcement environments, while offering exceptional ease-of-use.It boasts a single 31-band channel of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an…

DBX 266XS
Dual Compressor Gate

The dbx 266xs Compressor/Gate delivers exceptional dynamic control for a polished, professional sound. Its patented Overeasy compression technology provides smooth and musical performance, while the AutoDynamic attack and release controls, found only on dbx compressors, put great sound within easy…

DBX 260
Driverack Speaker EQ/Control With RTA And GUI

The 260 by dbx is a complete rackmount EQ and loudspeaker control system with limiters and real-time graphic spectrum analysis that help prevent damaging spikes in your audio, full GUI control and extensive bandpass, crossover and routing configurations. The 260 offers two independent channels of…

DBX DRIVERACK-PA2
2X6 PA Management System

The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet…

DBX 223XS
Crossover with XLR Connectors

The dbx 223xs stereo 2-way/mono 3-way crossover boasts precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver, the 223xs leaves your amplifiers free to use their full power…

DBX PB48
Patchbay, 1/4" TRS-Balanced

The dbx PB48 is a well-built, reliable patchbay that just works, all the time, every time.It's user-configurable for half-normalled or de-normalled, with 48 1/4" points on the front panel, connected to 48 1/4" points on the rear. The PB48 is a rugged, noise-free, versatile patchbay designed to…

DBX 215S
Dual Graphic Equalizer

The dbx 215s Dual 15-Band Graphic EQ can handle the most demanding sound reinforcement environments while offering exceptional ease-of-use. It boasts dual 15-band channels of 2/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an…

DBX 1231
* Equalizer, 31 Band, Dual

The dbx 1231 dual channel EQ, housed in a rugged 3U steel/aluminum chassis, can easily handle the most demanding sound reinforcement environments while offering the simplicity of straightforward controls.The dbx 1231 has all the features you might expect, including 31 1/3 octave bands, ISO…

DBX 234S
Stereo / Mono Crossover

The dbx 234s stereo 2-way/3-way/mono 4-way crossover boasts precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver, the 234s leaves your amplifiers free to use their full…

DBX 234XS
Crossover with XLR Connectors

The dbx 234xs stereo 2-way/3-way/mono 4-way crossover boasts precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver, the 234xs leaves your amplifiers free to use their full…

DBX RTA-M
RTA Mic/Clip/Case For Driverack PA/260

The RTA-M by dbx is an omni-directional, flat frequency measurement microphone specially designed for the Driverack series to pick up all frequencies from 20 Hz to 20 kHz , ensuring accurate "pinking"/real-time analysis of your audio. It runs on phantom power (supplied by the Driverack units) and…