Products, Delta Electronics

Delta Electronics CPB-1
CPB1 Without Front Panel

This version of the Delta CPB-1 comes without panel for mounting directly on the phasor panel (drill template supplied).The Delta Electronics CPB-1 Common Point Impedance Bridge is an operating impedance bridge designed for permanent installation in the phasing equipment at the antenna common…

Delta Electronics TCT1
*9230001001 Transformer

The Delta Electronics TCT-1 precision toroidal transformer provides sample voltages for RF current phase and magnitude measurement on broadcast antenna arrays. It is assembled in a rectangular aluminum enclosure with a 1.25" diameter insulated clearance hole for the antenna conductor. This…

Delta Electronics CPB1
*Common Point Impedance Bridge, 5 KW

The Delta Electronics CPB-1 Common Point Impedance Bridge is an operating impedance bridge designed for permanent installation in the phasing equipment at the antenna common point. The CPB-1 operates with common point power up to 5 kW with 100% amplitude modulation on a continuous basis. It…

Delta Electronics SNG1
*Stereo Noise Generator 120 VAC

The SNG1 offers laboratory type features and noise weightings in an affordable and compact package. Features: true balanced front and rear panel outputs; selectable white, pink and USASI noise spectra; generates true stereo noise; low DC offset; close channel tracking (>0.5 dB); input offers…

Delta Electronics CPB1A
*Common Point Inpedance Bridge, 50 KW

The Delta Electronics CPB-1A Common Point Impedance Bridge is an operating impedance bridge designed for permanent installation in the phasing equipment at the antenna common point. The CPB-1A operates with common point power up to 50 kW with 100% amplitude modulation on a continuous basis. It…

Delta Electronics CPB1B
*Common Point Inpedance Bridge 100 KW

The Delta Electronics CPB-1B Common Point Impedance Bridge is an operating impedance bridge designed for permanent installation in the phasing equipment at the antenna common point. The CPB-1B operates with common point power up to 100 kW with 100% amplitude modulation on a continuous basis. It…

Delta Electronics DTCA10HV
*Digital RF Ammeter

The DTCA Digital RF Ammeter series includes a wide variety of operating current ranges and current transformer conductor voltage ratings which are uniquely defined in the model designation system. Standard current ranges are 0.1 to 10A, 0.2 to 20A, 0.4 to 40A, 0.8 to 80A and 1.6 to 160A. Each of…

Delta Electronics 6742B
*Coaxial Transfer Switch 3-1/8", 240 VAC, 0-216 MHZ

The Model 6740B and Model 6742B Coaxial Transfer Switches are double-pole, double throw, high power switches for use with 3-1/8 inch 50 Ohm transmission line. The manually or remotely operated transfer switches enable the changing of coaxial connections between transmitters and antennas/dummy loads…

Delta Electronics OIB-1
Operating Impedance Bridge

The Model OIB-1 Operating Impedance Bridge measures the operating impedance of antennas, networks, transmission line sections, and the common point of directional antenna systems while they are functioning at operating power levels. The OIB-1 operates with a through power of up to 5,000 Watts, and…

Delta Electronics SM-1
*Splatter Monitor

Now you can use the same tool that the FCC uses to measure your station's compliance with NRSC and FCC regulations and requirements. Inexpensive and easy to use and interpret.

Delta Electronics CPB1-TCANN
*Dual Scale TCA Ammeter Installed On CPB-1

Factory installed Delta TCA RF dual scale Ammeter System option for the CPB1. The complete series of 5, 10, 20, 40, 80 and 160 Ampere dual scale RF Ammeters with appropriate sampling transformer are available. With the RF Ammeter mounted on the bridge panel, the total RF power is easily determined…

Delta Electronics CPB-1A
*CPB1A Without Front Panel

This version of the Delta CPB-1A comes without front panel for mounting directly on the phasor panel (drill template supplied).The Delta Electronics CPB-1A Common Point Impedance Bridge is an operating impedance bridge designed for permanent installation in the phasing equipment at the antenna…

Delta Electronics 6730E
*Coaxial X-Fer Switch 0-400MHz, 1 5/8" EIA Flange

The Model 6730E and Model 6732E Coaxial Transfer Switches are double-pole, double throw, high power switches for use with 1-5/8 inch 50 Ohm transmission line. The manually or remotely operated transfer switches enable the changing of coaxial connections between transmitters and antennas/dummy loads…

Delta Electronics OIB-3
*Impedance Bridge 12" Leads

The Model OIB-1 and Model OIB-3 Operating Impedance Bridges measure the operating impedance of antennas, networks, transmission line sections, and the common point of directional antenna systems while they are functioning at operating power levels. Both bridges operate with a through power of up to…

Delta Electronics 6732E
*Coaxial Transfer Switch 1-5/8"

The Model 6730E and Model 6732E Coaxial Transfer Switches are double-pole, double throw, high power switches for use with 1-5/8 inch 50 Ohm transmission line. The manually or remotely operated transfer switches enable the changing of coaxial connections between transmitters and antennas/dummy loads…

Delta Electronics CPB1-TCAN
*Single Scale TCA Ammeter Installed On CPB-1

Factory installed Delta TCA RF single scale Ammeter System option for the CPB1. The complete series of 5, 10, 20, 40, 80 and 160 Ampere single scale RF Ammeters with appropriate sampling transformer are available. With the RF Ammeter mounted on the bridge panel, the total RF power is easily…

Delta Electronics CPB1A-TCAN
*Single Scale TCA Ammeter Installed On CPB-1A

Factory installed Delta TCA RF single scale Ammeter System option for the CPB-1A. The complete series of 5, 10, 20, 40, 80 and 160 Ampere single scale RF Ammeters with appropriate sampling transformer are available. With the RF Ammeter mounted on the bridge panel, the total RF power is easily…

Delta Electronics 6740B
Coaxial Transfer Switch, 3-1/8",120 VAC,0-216MHZ

The Model 6740B and Model 6742B Coaxial Transfer Switches are double-pole, double throw, high power switches for use with 3-1/8 inch 50 Ohm transmission line. The manually or remotely operated transfer switches enable the changing of coaxial connections between transmitters and antennas/dummy loads…

Delta Electronics DTCA10XHV
*Digital RF Ammeter

The DTCA Digital RF Ammeter series includes a wide variety of operating current ranges and current transformer conductor voltage ratings which are uniquely defined in the model designation system. Standard current ranges are 0.1 to 10A, 0.2 to 20A, 0.4 to 40A, 0.8 to 80A and 1.6 to 160A. Each of…

Delta Electronics RG4B-240
Receiver/Generator, 240 VAC with Batteries

The RG-4 Receiver/Generator is Delta's newest model in its continuing line of precision RF generators and null detection receivers for impedance bridges. The RG-4 is designed as the ideal companion instrument for Delta's OIB-1 and OIB-3 MF Operating Impedance Bridges and the OIB-2 HF Operating…

Delta Electronics CPB1A-TCANN
*Dual Scale TCA Ammeter Installed On CPB-1A

Factory installed Delta TCA RF dual scale Ammeter System option for the CPB-1A. The complete series of 5, 10, 20, 40, 80 and 160 Ampere dual scale RF Ammeters with appropriate sampling transformer are available. With the RF Ammeter mounted on the bridge panel, the total RF power is easily…

Delta Electronics CPB-1B
*CPB1B Without Front Panel

This version of the Delta CPB-1B comes without front panel for mounting directly on the phasor panel (drill template supplied).The Delta Electronics CPB-1B Common Point Impedance Bridge is an operating impedance bridge designed for permanent installation in the phasing equipment at the antenna…

Delta Electronics RG4B-120
Receiver/Generator, 120 VAC with Batteries

The RG-4 Receiver/Generator is Delta's newest model in its continuing line of precision RF generators and null detection receivers for impedance bridges. The RG-4 is designed as the ideal companion instrument for Delta's OIB-1 and OIB-3 MF Operating Impedance Bridges and the OIB-2 HF Operating…