Bing ads convertion tracker
  • Products (57)

Products, Podcasting Packages, Test & Service Equipment, Podcasting, Interfaces and Routers, Broadcast, RDL

View: Grid | List

RDL FP-CH8
Chime Module

The FP-CH8 is an electronic chime generator that produces eight different synthesized chimes. Each chime can consist of up to 3 tones and 3 harmonics selected to produce sonically natural effects. Certain chimes are single tones and some are a sequence. Each of the 8 chimes is triggered by an…

Call for availability

List Price

$360.49

$256.95

Add to Cart Add to Quote

RDL HR-DAC1
D to A Converter - 24 Bit / 192 kHz

The HR-DAC1 is the ideal choice in installations requiring high quality analog audio from an AES/EBU, AES-3ID or S/PDIF digital audio source. The HR-DAC1 automatically detects a valid input on any of the four input jacks: S/PDIF optical, S/PDIF coaxial, AES-3ID or AES/EBU. The AES/EBU input is 110…

Call for availability

List Price

$741.31

$528.38

Add to Cart Add to Quote

RDL SF-ND2
Network to Digital Audio Interface - Dante

The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on XLR, or coaxial and optical S/PDIF. The switch enables the appropriate output jack and any required electrical and data…

Call For Availability

List Price

$500.80

$356.95

Add to Cart Add to Quote

RDL STA-1M
Audio Line Amp

The STA-1M allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line. The circuit design allows the input to accept either balanced or unbalanced signals, of either high or low impedance. This is an instrumentation type input stage which will amplify the…

Call for availability

List Price

$168.71

$120.25

Add to Cart Add to Quote

RDL SF-UN1
USB to Network Interface - Dante

The SF-UN1 is a digital audio interface that converts a USB stereo digital audio source to two Dante network audio channels. The SF-UN1 automatically detects a valid USB input. The input is decoded, re-clocked and transmitted to the Dante network. The module provides automatic sample rate…

Call For Availability

List Price

$634.24

$452.07

Add to Cart Add to Quote

RDL DD-BN31
Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE - White

The DD-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required…

Call For Availability

List Price

$888.71

$633.43

Add to Cart Add to Quote

RDL PS24AS
24 VDC Switching Power Supply, North American AC Plug, 500 mA, dc Plug

The RDL PS-24AS is a 24 Vdc switching power supply with a North American AC plug.RDL PS-24AS Specifications: • Input: 100 to 240 VAC • Output: 24 Vdc, 500 mA (UL, CSA) • Dimensions: 1.65 in. (4.2 cm) x 2.75 in. (7 cm) x 1.45 in. (3.7 cm), nominal • Efficiency: ENERGY STAR Level IV

In Stock

List Price

$33.64

$23.97

Add to Cart Add to Quote

RDL FP-UBC6
Converter, Unbalanced to Balanced, 6 Channel

The FP-UBC6 is the ideal choice for multiple channel connectorized conversion from unbalanced to balanced audio. This module features six identical channels, making it ideally suited to converting consumer 6-channel surround sound into the professional audio format. Each input channel is…

Call for availability

List Price

$587.95

$419.08

Add to Cart Add to Quote

RDL ST-GLA1
Gated Line Amplifier

The ST-GLA1 is a self-gated line amplifier designed to be used in a variety of situations where it is desired to produce an automatically switched line-level signal with integral noise reduction. This module may be used in conjunction with other RDL® modules to configure automatic mixing…

Call for availability

List Price

$187.76

$133.83

Add to Cart Add to Quote

RDL STA-1
Interface Amplifier

The STA-1 is a dual-channel line-level preamplifier with bridging inputs, adjustable gain or loss, and low-impedance outputs. Each of the two identical circuits is both an electronic line transformer and a line amplifier. Hook up the STA-1 just like a pair of audio transformers with gain. True dc…

Call for availability

List Price

$230.76

$164.47

Add to Cart Add to Quote

RDL DD-BN22
Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE -White

The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the…

Call For Availability

List Price

$854.00

$608.70

Add to Cart Add to Quote

RDL DDB-BN31
Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE - Black

The DDB-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required…

Call For Availability

List Price

$888.71

$633.43

Add to Cart Add to Quote

RDL DD-BN40
Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE - White

The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be…

Call For Availability

List Price

$914.43

$651.76

Add to Cart Add to Quote

RDL ST-SX4
4 Input Switcher

The ST-SX4 accepts up to four unbalanced audio sources. Any of these sources may be selected to feed the output, or all sources may be switched off. The output from the ST-SX4 is unbalanced. Control of the module is accomplished through a single input terminal. Connection of a specified resistance…

Call for availability

List Price

$158.50

$112.97

Add to Cart Add to Quote

RDL FP-ALC1
Automatic Level Control Mono +4 Balanced

The FP-ALC1 is the ideal choice in many applications where consistent mono audio levels are needed from professional sources with varying audio output levels. Power connections are made using either the full-size barrier block or a dc power jack located in one end panel.The FP-ALC1 is a single…

Call for availability

List Price

$346.30

$246.83

Add to Cart Add to Quote

RDL SF-XMN4
Microphone to Network Interface - Dante

The SF-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the SF-XMN4. Each XLR input is equipped with a switch to set the gain for dynamic or condenser microphones. A dual-LED VU meter displays the level for…

Call For Availability

List Price

$951.95

$678.51

Add to Cart Add to Quote

RDL ACM-3
AM Noise Monitor

RDL's ACM technology is the only time-proven, industry accepted method of controlling Synchronous AM Noise (the elusive FM transmission bandwidth variations that aggravate multipath artifacts in listeners' receivers). Hundreds of top performing FMs in every major U.S. market turn to ACM technology…

Call for availability

List Price

$1,257.45

$896.26

Add to Cart Add to Quote

RDL DDS-BN31
Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE- Stainless Steel

The DDS-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required…

Call For Availability

List Price

$888.71

$633.43

Add to Cart Add to Quote

RDL SF-NH1
Network to Stereo Headphone Amplifier - Dante

The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The output connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special…

Call For Availability

List Price

$568.85

$405.46

Add to Cart Add to Quote

RDL SF-BNC2
Bidirectional Unbalanced Stereo Audio Network Interface - Dante

The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors. Special software is not…

Call For Availability

List Price

$715.86

$510.24

Add to Cart Add to Quote

RDL DDB-BN2ML
Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE - Black

The DDB-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN2ML.…

Call For Availability

List Price

$756.59

$539.28

Add to Cart Add to Quote

RDL DDS-BN40
Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE - Stainless Steel

The DDS-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN40. Each input provides three switches that may…

Call For Availability

List Price

$914.43

$651.76

Add to Cart Add to Quote

RDL FP-UBC2
Converter, Unbalanced to Balanced, 2 Channel

The FP-UBC2 is the ideal choice for connectorized conversion from unbalanced to balanced audio. This module features two identical channels. Gold-plated phono jacks are utilized for each unbalanced input channel. Each output is balanced, connected through an XLR jack. A gain trim potentiometer is…

Call for availability

List Price

$274.18

$195.43

Add to Cart Add to Quote

RDL SF-NP40D
Network to 40 Watt Stereo Power Amplifier - Dante (US Power Cord)

The SF-NP40D is an audio power amplifier that converts two Dante network audio channels to two 4 Ohm or 8 Ohms amplified outputs. Each output provides 20 watts into 8 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. A front-panel blue LED…

Call For Availability

List Price

$605.58

$431.63

Add to Cart Add to Quote

RDL DDB-BN40
Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE - Black

The DDB-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN40. Each input provides three switches that may…

Call For Availability

List Price

$914.43

$651.76

Add to Cart Add to Quote
View: Grid | List
26 - 50 of 57 Items