Products, Whirlwind

Whirlwind PA1
Personal Headphone Amplifier

The Whirlwind PA-1 is a high-quality, portable stereo headphone amp. It accepts both balanced and unbalanced stereo line level signals through paralleled XLR and 1/4 TRS inputs. A mono/stereo switch allows selection of either stereo or mono operation. In mono mode, two separate inputs can be mixed…

Whirlwind THS1M
Talkback HeadphoneBOX, Push to Mute

The Whirlwind THS 1 models of sports announcer boxes have single button mic controls. The THS 1M is the Push to Mute version. The microphone output of the THS 1 boxes is a passive, straight through connection. THS boxes are ergonomically designed to put the control buttons within easy reach of the…

Whirlwind MICMUTE-PPD
Mic Switcher On/Off, Desktop

The Whirlwind Micmute PPD offers a desktop passive switching solution for controlling the on and off conditions of a microphone or balanced line signal via its finger switch. Micmute PPD is configured as a latching Push On/Push Off switch (the switch must be pushed and released to turn the signal…

Whirlwind THS3
Talkback headphone BOX

The THS 3 Talkback/Headphone box is an all-purpose, fully loaded sports announcer console. Both main and talkback microphone outputs are provided, with Mic On/Off, Cough and Talkback switches for control. The talkback output is line level with a trim control and the main microphone output of the…

Whirlwind TESTER
Cable Tester

The original Whirlwind Tester easily checks for shorts, bad connections, and accommodates XLR, 1/4" and phono plugs. It easily fits in your tool box. 9-volt battery required.

Whirlwind MICMUTE-PMD
Mic Switch Momentary Off, Desktop

The Whirlwind Micmute PMD offers a desktop passive switching solution for controlling the on and off conditions of a microphone or balanced line signal via its finger switch. Micmute PM is configured as a Push to Mute switch, with its input signal is normally on, passing through the box. When its…

Whirlwind HBUC
Headphone Audio Control Box

This compact, passive headphone control box mounts under a table or counter and provides headphone volume control for broadcast applications, recording studios, language labs, and anywhere space is at a premium. It sports two 1/4" inputs for input / through connections, and boasts a rounded edge…

Whirlwind THS2
Talkback Headphone Box

The Whirlwind THS 2 sports announcer box has two mic control buttons, a latching Mic On/Off switch and a momentary Cough switch. The microphone output of the THS 2 boxes is a passive, straight through connection. THS boxes are ergonomically designed to put the control buttons within easy reach of…

Whirlwind MS-12-0-NR-100
Medusa Snake 12 XLR No Returns 100'

Whirlwind's Medusa series snakes have been the touring standard worldwide for decades. Built in the USA, they offer superb audio quality with roadworthy ruggedness. Note: Image shows the 16-input Medusa MS-16. Main Features: 12 XLR inputs; no returns Heavy-duty powder coated steel stagebox with…

Whirlwind THSR
THS R Talkback headphonebox, RTS version

The THS R Talkback/Headphone box is a specialized sports announcer console designed to operate with RTS® IFB systems. Main and talkback microphone outputs are provided, with Cough and Talkback switches for control. The talkback output is line level with a trim control and the main microphone output…

Whirlwind THS4
Talkback headphone BOX

The THS 4 Talkback/Headphone box is an all-purpose, fully loaded sports announcer console. Both main and talkback microphone outputs are provided, with Mic On/Off, Cough and Talkback switches for control. The talkback output is line level with a trim control and the main microphone output of the…

Whirlwind IMP2
Direct Box Single Channel

Built rugged on the inside and outside, the Whirlwind IMP2 passive direct box is a mainstay ofpro systems everywhere. It converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal quickly, efficiently and quietly. Whirlwind IMP2 Features: • 1/4" parallel…

Whirlwind PRESSPOWER2
Active Pressbox 2 In 16 Out

The full-featured PRESSPOWER 2 is the successor to the original PRESSPOWER unit, the standard for press conferences worldwide. It features 2 mic/line inputs with individual gain controls and 16 transformer isolated outputs that are individually switchable for mic or line level operation. The…

Whirlwind SPLITTER1X3
Mic Splitter, 1 In 3 Out

The Whirlwind SP1X3 provides one direct and two transformer-isolated outputs (all Male XLR) from a mic level input (Female XLR). Each transformer-isolated output features a ground lift switch. The direct output always has a connected ground. The direct output is a straight through connection from…

Whirlwind THS1T
Talkback HeadphoneBOX, Push to Talk

The Whirlwind THS 1 models of sports announcer boxes have single button mic controls. The THS 1T is the Push to Talk version. The microphone output of the THS 1 boxes is a passive, straight through connection. THS boxes are ergonomically designed to put the control buttons within easy reach of the…

Whirlwind MS-12-0-NR-050
Medusa Snake 12 XLR No Returns 50'

Whirlwind's Medusa series snakes have been the touring standard worldwide for decades. Built in the USA, they offer superb audio quality with roadworthy ruggedness. Note: Image shows the 16-input Medusa MS-16. Main Features: 12 XLR inputs; no returns Heavy-duty powder coated steel stagebox with…

Whirlwind MICMUTE-PTD
Mic Switcher, Momentary On, Desktop

The Whirlwind Micmute PTD offers a desktop passive switching solution for controlling the on and off conditions of a microphone or balanced line signal via its finger switch. Micmute PTD is configured as a Push to Talk switch, with its input signal normally not connected to the output (nothing…

Whirlwind MICPOWER2
Portable 48V Phantom Power Supply

The Whirlwind Micpower 2 (MICP2) is a premium stereo phantom power supply. Its regulated 48 Volt DC output is ultra quiet, introducing no noise into the microphone's signal path. The Micpower 2 is conveniently portable, operating on four long lasting AA batteries or on AC when desired, by…

Whirlwind QBOX
Audio Line Tester

With the Whirlwind Qbox, send a tone or signal over any XLR line. In one battery-powered unit, you have a microphone, a speaker, a test tone generator, outputs for standard headphones, a 1/4 jack for line in and voltage presence LEDs for confirming phantom or intercom power.

Whirlwind PCDI
Stereo Direct Box

The Whirlwind pcDI is designed to interface unbalanced stereo line sources with professional balanced low impedance equipment. This unit contains two separate DIs. Input your signals with one 3.5 mm (1/8") mini TRS stereo jack or two sets of color-coded RCA phono input and through jacks. Output is…

Whirlwind MICMUTE-PM
Mic Switch Momentary Off, Pedal

The Whirlwind Micmute PM offers a passive switching solution for controlling the on and off conditions of a microphone or balanced line signal via its heavy-duty footswitch. Micmute PM is configured as a Push to Mute switch, with its input signal is normally on, passing through the box. When its…

Whirlwind ISOXL
Line Isolator XLRF to XLRM

Housed in a high impact nylon casing, the Whirlwind ISOXL is a professional quality compact transformer in an XLR male/female tube for quick-fix line isolation. The shield is lifted from input to output.

Whirlwind MICMUTE-PT
Mic Switch Momentary On, Pedal

The Whirlwind Micmute PT offers a passive switching solution for controlling the on and off conditions of a microphone or balanced line signal via its heavy-duty footswitch. Micmute PT is configured as a Push to Talk switch, with its input signal normally not connected to the output (nothing…

Whirlwind ISOPOD
iPod InterfaceTRS In XLRM Out

Housed in a high impact nylon casing, the Whirlwind ISOPOD safely sums to mono and transformer isolates unbalanced 1/8" (3.5mm) stereo connections to balanced XLR. ISOPOD works great for creating a balanced mono signal from MP3 players and computers to send to professional mixers' line inputs.

Whirlwind CONSOLETAPE
Console Tape

Knowing who's who while recording them is always a good thing. So is not having ugly residue on your channel strips. This is what you need. Low tack. Bright white. Write on it, and peel it off with no side-effects when you're done.1" wide, 180 ft.