Products, Speaker Stands, Preamps, Cartridges and Styli, Cable - RF and Accessories, Stands and Stages, Voice Over, Turntables, Broadcast

Andrew 243095-1
*Hanger, Click-On Hardware Kit, 1/2"-7/8", 3 Stack

Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware

Andrew SEC-412
SnapSeal Entry Cushion with 4 holes for 1/2 inch corrugated coaxial cable

The Andrew SEC-412 is a SnapSeal entry cushion with 4 holes for 1/2-inch corrugated coaxial cable.

Andrew 241088-2
*Grounding Kit, 5/8" And 7/8" Attached 2 Hole Lug

Standard Grounding Kit for 5/8 in and 7/8 in corrugated coaxial cable

Gator Frameworks GFW-SPK-3000
Deluxe Aluminum Lift-EEZ Speaker Stand

Frameworks aluminum speaker stand with LiftEEZ piston Main Features: • Deluxe Aluminum Speaker Stand • LiftEEZ Self-Rising Center Tube Piston Helps Lift Speaker For You • Red Safety Trim On Feet (Removable) • 35mm Diameter Inner Tube With 38mm Diameter Adapter Included •…

Myat 301-009
Swivel Flange

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 301-004-XXX
Line Assembly Flanged (per inch)

Unflanged line assembly of customer specified length, 20' typical, 3 1/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 2.5 lbs per foot. Specify length in inches.

Myat 301-010
* Insulator Connector, 3 1/8" Bullet

Anchor insulator connector, 3 1/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 12 oz.

Andrew 26985A
Hoisting Grip for 3" Cable

Lace-up Hoisting Grip for 3 in coaxial cable

On Stage SSB6500
Bag For Speaker Stand/Mic Stand

A must for every roadie, this rugged padded nylon bag provides ample room for either two speaker stands, six mic stands or various drum hardware. Features an adjustable shoulder strap with metal clip for fast removal. Also includes two hand straps for convenient handling. A heavy-gauge 2-pull…

Myat 301-021
* Elbow, 3 1/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 3 1/8" 50 ohm. Includes anchor insulator connector with anti-splitting device, "O" ring, and hardware kit. Approx. Wt. 8.8 lbs.

Andrew 31769-1
*Hardware Kit For Hangers, 1" Bolts 10 Pieces

Hardware Kit of 10 stainless steel fillister-head bolts,3/8" lockwashers, and nuts for attachment ofhangers to drilled tower members. 1" bolts, 10 pieces.

ERI RLA300-11-H
*3-1/8 Vertical Spring Hanger

3-1/8 hinged vertical spring hanger, supports the transmission line, prevents lateral motion, and accommodates differential expansion and contraction. Use at 10 foot intervals. Hinged to open from left or right side to save installation labor. Includes 1/2-inch mounting hardware.

Ultimate Support TS-110BL
Tall Speaker Stand w/ Leveling Leg

The Ultimate Support TS-110BL speaker stand boasts a maximum height of 9 feet, two inches and features an air-powered internal shock that lifts speakers weighing 50 lbs and less with no effort, and requires just one hand to raise speakers weighing more than 50 lbs. It also includes one leveling leg…

Coax-Seal COAXSEAL
Moisture-Resistant Coax Seal - 60" X 1/2" Roll

Hand-moldable, plastic Coax-Seal seals coax fittings from moisture and corrosion. Made of a plastic material that will quickly and effectively seal all types of coax fittings of all shapes, Coax-Seal stays flexible for years, thus insuring moisture-proof connections and insuring long coax life. It…

Myat 301-008
Fixed Flange, 3-1/8" EIA, Solder or Weld

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Andrew 223700-724
*5' Grounding Kit for LDF12

Standard Grounding Kit for 2-1/4 in and 3 in corrugated coaxial cable and elliptical waveguide 28 and 37

Andrew 241088-4
*Grounding Kit for 1 5/8" Cable

Standard Grounding Kit for 1-5/8 in corrugated coaxial cable

Gator Frameworks GFW-SPK-2000
Deluxe Aluminum Speaker Stand

Frameworks adjustable speaker stand with aluminum frame and 81 inch max height Main Features: • Lightweight Aluminum Speaker Stand • Dual Diameter Inner Tube For 35mm and 38mm Speaker Mount • Red Safety Trim On Feet (Removable) • 125 Lb Weight Capacity (56 kg) • Min / Max…

Ultimate Support TS90B
PA Speaker Stand, Telelock, Black - Each

The Ultimate Support TS-90B is a sturdy, lightweight tripod stand that can support speakers up to 150 lbs. It features a patented TeleLock collar that lets one person easily and safely raise and lower heavy speakers. It adjusts in height from 3'8" to 6'7".The TeleLock collar has an internal,…

Andrew 43211A
*Hangers, 1/2" Standard - Kit Of 10

Cable hangers, 1/2" standard - kit of 10. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew 31766A-11
*Hanger, 3" Standard - Kit of 10

Butterfly Hanger for 3 in coaxial cable,kit of 10. Product may differ from photo. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew L2TNM-PL
*N Connector, Male For 3/8" Cable

Type N Male Positive Lock for 3/8 in LDF2-50 cable

Myat 201-014
Flange Adaptor

Flange adapter, clamp-type, 1 5/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 1.25 lbs.

Andrew 245171
Weatherproof Kit, Cold Shrink 7/8"

Andrew 3M™ Cold Shrink™ Kit for 7/8 in to 1/4 in through 1/2 in connections

Andrew 204679A-9
3" Cable Entry Boot 4" (102 mm)

Standard cable entry boot for use with 204673 series feed-thru plates. 1 hole in boot.