Broadcast Tools ACS8.2Plus
8X2 Stereo Audio Control, Euroblock Connectors
The ACS 8.2 Plus cleanly provides matrix audio switching of 8 stereo inputs to 2 stereo plus 2 mono outputs. You can assign any or all inputs to any or all outputs, with any input assigned to output one having fading capabilities. It features multiple Euroblock connectors for all audio connections,…
In StockBroadcast Tools Audio Sentinel Web Plus
Web-Enabled Two Channel Stereo Silence Monitor
The Audio Sentinel®Plus>>Web is a web-enabled two channel stereo silence monitor combined with a transparent, integrated stereo audio switcher. Audio Sentinel®Plus>>Web is designed to monitor two balanced or unbalanced independent stereo analog audio sources, one primary, the other…
In StockBroadcast Tools MIX-4
4CH Stereo Audio Utility Mixer
The Broadcast Tools Mix-4 is a four channel stereo audio utility mixer ideally suited for the typical broadcast studio or any similar applications. It features four stereo line level high Z mixing inputs, which accept balanced or unbalanced stereo sources. Each input is equipped with a high quality…
Call For AvailabilityBroadcast Tools SS4.1-MLR
4 inputsingle output switcher/router
The SS 4.1 MLR is a transparent four input, one output switcher/router with mechanical latching relays. The SS 4.1 MLR is perfect for all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is accomplished with mechanical latching gold…
In StockBroadcast Tools SS 4.4
4x4 Active Stereo Matrix Switcher
The SS 4.4 provides matrix audio switching of four stereo inputs to 4 stereo outputs. Matrix switching allows any/or all inputs to be assigned to any/or all outputs. The SS 4.4 may be controlled via front panel switches, contact closures and/or the multi-drop RS-232 serial port. Additional features…
In StockBroadcast Tools SS 16.4
16 Stereo in 4 Stereo Out Switcher
The Broadcast Tools SS 16.4 provides matrix audio switching of 16 stereo inputs to 4 stereo plus 4 monaural outputs. Matrix switching allows any or all inputs to be assigned to any or all outputs. The SS 16.4 may be controlled via front panel switches, contact closures, 5-volt TTL/CMOS logic and/or…
Usually Available in 1-2 WeeksBroadcast Tools UNIVERSAL-USB-INTERFACE
Stereo USB Audio Interface with switchable headphone monitoring and StudioHub+ compatible RJ 45 I/O
The Universal USB Interface is a stereo computer audio interface designed for broadcast use. The Universal USB Interface supports professional balanced +4 dBu nominal input and output audio levels via StudioHub compatible RJ45 jacks and also features an AES/EBU output via a male XLR jack. Includes…
Call For AvailabilityBroadcast Tools ACS4.1
4+1 Stereo Matrix Switcher
The Broadcast Tools ACS 4.1 provides matrix audio switching of 4 stereo inputs to one stereo output. Matrix switching allows any/or all inputs to be assigned to one output. The ACS 4.1 may be controlled via front panel switches, contact closures, logic and/or the multi-drop RS-232 serial port…
In StockBroadcast Tools UNIVERSAL 4.1-MLR-WEB
4ch passive switcher/router with AES/Analog stereo XLR and StudioHub I/O
The Universal 4.1 MLR/Web is a web based transparent four input, one output switcher/router with mechanical latching relays designed to pass AES or stereo balanced signals. The unit may be configured to monitor for stereo analog audio silence or loss of AES clock when configured for AES switching.…
Call For AvailabilityBroadcast Tools SS8.1MLR
8X1 Stereo Routing Switcher
The SS 8.1 MLR is a transparent eight input, single output switcher/router with mechanical latching relays. The SS 8.1 MLR is perfect for all types of passive signal switching controlled via front panel switches, contact closures and/or multi-drop RS-232 serial. Switching is accomplished with…
Call For AvailabilityBroadcast Tools AUDIOSENTINEL-4-WEB
Web-enabled 4 Channel stereo, 8 Channel mono balanced analog silence sensor
The Audio Sentinel® 4 >> Web is a web-enabled four channel stereo/eight mono channel silence monitor. All four stereo inputs are balanced and feature pluggable screw terminal-block and StudioHub+ compatible RJ45 inputs wired in parallel for ease of wiring. Each stereo input can be configured…
In StockBroadcast Tools COA-9X DS MAX
Connect-O-Adapter 9 ABC XDS; WWI IDC MAX StarGuide II/III Analog and AES Audio
Need to convert the DB-9 connector to the euroblock removable screw terminals? The Connect O' Adapter 9 XDS/MAX will do the job. The COA-9 XDS/MAX is designed to plug into the male 9-pin D-Sub connector on the ABC/XDS, WW1 IDC "MAX" or StarGuide II / III.
Usually Available in 1-2 WeeksBroadcast Tools PROMIX Hub-6
Mix/Switch/Distribution Interface For PROMIX Series Mixers
The ProMix Hub 6 facilitates the switching, mixing and distribution of program, IFB (cue) and talkback audio for any combination of up to six ProMix-1 or ProMix 4 units using Cat5 cable. Talkback utilizes a common party-line signaling protocol for easy configuration and operation. Users can mix and…
In StockBroadcast Tools SS2.1MLR-TERM
Audio Switcher / Router with Terminal Connectors
The SS 2.1 MLR/Term is a transparent two input, dual output switcher/router with mechanical latching relays and Terminal connectors. The SS 2.1 MLR/Term is perfect for all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is…
In StockBroadcast Tools SS4.1MLR-RJ
4 inputsingle output switcher/router with RJ45
The Broadcast Tools SS 4.1 MLR/RJ is a transparent four input, one output stereo RJ45 audio switcher/router with mechanical latching relays. The SS 4.1 MLR/RJ is perfect for all types of passive signal switching via front panel switches, contact closures and/or RS-232 serial commands. Switching is…
Call For AvailabilityBroadcast Tools RJ-XLR-16F
R16 XLR-F jacks, for 8 stereo in or 16 mono/AES in
The Broadcast Tools RJ-XLR 16F is a 1RU 19” rack breakout panel that converts 16 female XLR jacks (XLR-F) to RJ45 audio jacks using the standard Cat5 audio pinout. The XLR jacks are paired to feed stereo audio to a stereo RJ45 jack as well as split out to two additional individual RJ45 jacks for…
Call For AvailabilityBroadcast Tools Flex Panel
Filler Panel For RA-1 Rack Mount
The Flex-Panel is an innovative solution that lets you configure a filler panel to the required width when used with the RA-1 Rack Shelf.
Usually Available in 1-2 WeeksBroadcast Tools RJ-XLR-8F8M
8 XLR-F jacks and 8 XLR-M jack panel
The Broadcast Tools RJ-XLR 8F 8M is a 1RU 19” rack breakout panel that converts 8 female XLR jacks (XLR-F) and 8 male XLR jacks (XLR-M) to RJ45 audio jacks using the standard Cat5 audio pinout. The XLR jacks are paired to feed stereo audio to a stereo RJ45 jack as well as split out to two…
Call For AvailabilityBroadcast Tools COA-37XDS
Connect O Adapter, ABC XDS Starguide II/III
Here's another problem solver from Broadcast Tools for the ABC XDS or StarGuide II/III satellite receiver! The Connect O' Adapter 37 XDS provides an effective way to convert the male DB-37 connector to the euroblock removable screw terminals.
Usually Available in 1-2 WeeksBroadcast Tools SS2.1MLRBNC
Audio Switcher with BNC Connectors
The Broadcast Tools SS 2.1 MLR/BNC is a transparent, two input, dual output switcher/router with mechanical latching relays and BNC connectors that excels at all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is accomplished with…
Call For AvailabilityBroadcast Tools RA-1
Rack Mount Shelf
The Broadcast Tools RA-1 (1-RU rack shelf) provides mounting for three tri-rack or two half-rack "Rack-Able" configured products. The RA-1 is pre-drilled for flush and recessed product mounting. The RA-1 is furnished with filler panels and mounting hardware.
In StockBroadcast Tools SS2.1MLR-RJ
Audio Switcher / Router with RJ45
The Broadcast Tools SS 2.1 MLR/RJ is a transparent two input, one output stereo RJ45 audio switcher/router with mechanical latching relays. The SS 2.1 MLR/RJ is perfect for all types of passive signal switching via front panel switches, contact closures and/or RS-232 serial commands. Switching is…
Call For AvailabilityBroadcast Tools COA-15 MAX
Connect-O- Adapter15 WWI IDC MAX, StarGuide
Need to convert the DB-15 connector to the euroblock removable screw terminals? The Connect O' Adapter 15 MAX will do the job. The COA-15 MAX is designed to plug into the male 15-pin D-Sub connector on the WW1 IDC "MAX" or StarGuide II/III.
Usually Available in 1-2 WeeksBroadcast Tools DTD-16 PLUS
DTMF Tone/Sequencer Decoder
The DTD-16 Plus is a full-featured DTMF tone/sequence decoder that is user programmable to decode single tones or sequences up to six tones in length and maybe assigned to any one of eight SPST normally open relays, eight open collectors and/or the USB serial port. The relays and open collectors…
Call For AvailabilityBroadcast Tools GPI-16-PLUS
16 GPI Inputs to Serial/USB Port
The GPI-16 Plus interfaces 16 general purpose logic inputs to users PC COM or USB port. The user may select from two pre-programmed serial formats; the “PIP” GPI format which is used on most of our audio switchers, or the legacy AT-1616 format. Additional features include; Plug-in…
Call For Availability