Products, Wireless Antennas and Accessories, Synchronizers, Antennas, Signal Processing, Microphones - Wireless, Broadcast

Sennheiser AWM2
Antenna Wallmaount

With the AWM 2, the antennas can be installed in an optimum way and nearly invisible, in case the stationary receiver shall be invisible or needs to be further away. It can be easily mounted on a mobile microphone tripod or permanently installed on a wall.Main Features:• Unobtrusive antenna wall or…

Nicom BKG1P-M
Medium Power Portable Broadband FM Dipole 7-16" DIN Connector

This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…

Lectrosonics ALP500
Antenna LPDA, Shark Fin Style

The Lectrosonics ALP500 antenna boasts a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth. With VSWR below 2:1 from 450 to 862 MHz, the broad bandwidth of the ALP500 covers a wide section of the band used for Lectrosonics wireless…

Drawmer D-CLOCK
Clock Distribution 1 in 20 out display

The Drawmer D-Clock is a dual input/twenty output word clock distributor featuring a 16 character blue LCD display that provides a reference measurement of the incoming sample rate. Both AES/EBU and BNC word clock inputs offer a zero latency loop through output with switchable high impedance to…

Lectrosonics ARG15
15' Cable, Mini Coax BNC-BNC

ARG SERIES COAX CABLESCoaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. ARG15 is a 15 ft.cable with 2.0 db loss per 100 ft. Note: Photo shows the 2 ft model # ARG2.

ATI MLA400-1
4 CH Line Amplifier Transformer Balanced Outputs

Multiple Amplifier Arrays provides you with four identical Line Amplifier channels. These channels may be used as individual independent and isolated amplifiers or they may be combined at internal summing points brought out to the rear connector to form mixers, summing amplifiers, distribution…

Nicom BKG1P-F
Medium Power Portable Broadband FM Dipole EIA Flange Connector

This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…

Lectrosonics ARG25
25' Cable, Mini Coax BNC-BNC

ARG SERIES COAX CABLESCoaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. Belden 9913F is a low loss coaxial cable used for ARG25.ARG25 is a 25 ft. cable with 1.9 db loss per 100 ft. Note: Photo shows the 2 ft model # ARG2.

Shure HA8089
PWS Helical Antenna 480 MHz - 900 MHz

The Shure HA8089 Helical Antenna is a wideband UHF remote antenna for Shure wireless receivers, PSM transmitters and antenna distribution systems, so it'll work with your Shure system.Already an MVP at the Super Bowl, that media-saturated event where accurate transmission and reception is of prime…

Lectrosonics ARG50
50' Cable, Mini Coax BNC-BNC

ARG SERIES COAX CABLESCoaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. Belden 9913F is a low loss coaxial cable used for ARG50.ARG50 is a 50 ft. cable with 2.8 db loss per 100 ft. Note: Photo shows the 2 ft model # ARG2.

Lectrosonics ARG2
2' Cable, Mini Coax BNC-BNC

ARG SERIES COAX CABLESCoaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. ARG2is a 2 ft. cable with 1.0 db loss per 100 ft.

Audio Technica DFIN
Multi-purpose Diversity Fin Antenna for wireless microphones

The Diversity Fin™ Antenna is a multi-purpose antenna from RF Venue. It is designed to be used with wireless microphone systems and other UHF receivers incorporating diversity reception, and comprises orthogonal directional LPDA (log periodic dipole array) and bidirectional dipole elements in order…

Lectrosonics ALPKIT
Mounting Kit for ALP, SNA Series

Accessory mounting kit for ALP600 or SNA600 antennas. For details, see page 2 of the PDF under More Product Info link at bottom of page.The ALP600 and SNA600 both include a 50 Ohm BNC connector and a 3/8"-16 stainless steel mounting stud. The mounting stud adapts these antennas for use with the…

Lectrosonics ALP690
Active/passive LPDA antenna with selectable RF gain and filtering

The ALP690 is a high-performance active/passive UHF directional antenna with built-in RF amplifier for use with wireless microphone receivers or base station transmitters. The antenna is powered by DC bias inserted on the coaxial cable. When no bias is applied, the ALP690 automatically switches via…

Shure PA805Z2-RSMA
Passive Directional Antenna (GLX-D)

The PA805Z2-RSMA Passive Directional Antenna both improves reception of transmitter signals and minimizes interference from any 2.4 GHz sources near receivers. A key part of any GLX-D® Advanced Digital Wireless installation, PA805Z2-RSMA works exclusively with GLX-D Advanced. Includes 10' RSMA cable.

Shure UA221-RSMA
Reverse SMA Passive Antenna Splitter

Reverse SMA Passive Antenna Splitter works with GLX-D® Advanced Digital Wireless Systems.Specifications:Frequency Range: • <2:1 Voltage Standing Wave Ratio (VSWR) • 700–2700 MHz • Impedance: 50 Ω • Port-to-port isolation: 20 dB, minimum • Insertion Loss: 0.8 dB (3 dB splitter loss not included)…

Shure UA505
Mounting Bracket, BNC Adapter for Remote Antenna

Mounting Bracket, BNC Adapter for Remote Antenna

Shure UA8-2.4GHZ
Antenna, 1/2 Wave, 45 Deg, 2.4GHz

UA8-2.4GHZ is an antenna for the GLXD Advanced line.