Products, Clocks and Timers, Turntables, Broadcast

Audio Technica AT-LP120XUSB-SV
Fully manual 3-speed direct drive USB/analog turntable system, Silver

This update of the AT-LP120-USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection…

Paravel Systems WallTime
NTP Synchronized Studio Clock and Notification System

WallTime is a NTP synchronized studio clock and notification system that works with your standard computer monitor or television. The clock is kept always in sync using Network Time Protocol (NTP). It can take the place of stand alone clock systems, notification systems, on-air lights and more.Main…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Numark GROOVETOOL
Cartridge/Stylus for TTUSB Turntable

Keep it old school with this adjustable headshell mount cartridge. You get great sound and strong tracking along with a replaceable diamond tip stylus.Main Features: • 0.6mm spherical diamond tip • Tracking force: 2.5g to 3.5g • Channel separation: 26dB at 1kHz • Output: 2.4Mv • Headshell not included

ESE ES941U
*Time Code Remote Display

The ES-941U Time Code display features 4.0" bright red LED displays housed in a black-textured aluminum wall-mount enclosure (7" H x 19" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code…

ESE ES110
GPS Based 10 MHz Frequency Standard

The ESE ES-110 GPS-based Frequency Generator generates a stable source of 10 MHz and 1 PPS using GPS (Global Positioning System) satellites as a reference. The unit provides 10 MHz in both Sine Wave and Square Wave (5 volt logic) form. The 1 PPS output is a 50% duty, 5-volt logic signal,…

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

ESE ES126U
.55" 12-Digit ESE/SMPTE/EBU/ASCII SerialSlave,Rack

The ES-126U is a twelve-digit Time Code Reader (ESE-TC90, ASCII, SMPTE or EBU) that displays six digits (Hours, Minutes & Seconds) of time and six digits (Month, Day and Year or optionally Day, Month and Year) of date. The displays are .56" high yellow LEDs and the unit is mounted in a 1 3/4"…

Tascam CG-1800
Master Clock w/Video Out

TASCAM’s CG-1800 is designed for post-production facilities that require solid video clock output in addition to precise word clock generation. Four video clock outputs and a video clock input ensure tight synchronization with video devices. The video clock is compatible with tri-level sync for…

ESE ES362UE
Master Timer (ES 302UE / Serial Output)

The ES-362UE is a 100 Minute Up/Down Timer. The ES-362UE is housed in a folded aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the…

ESE ES127U
ESE/SMPTE/EBU/ASCII Serial Slave, Rack

The ES-127U is a twelve-digit Time Code Reader (ESE-TC90, ASCII, SMPTE or EBU) that displays six digits (Hours, Minutes & Seconds) of time and six digits (Month, Day and Year or optionally Day, Month and Year) of date. The displays are one-inch high yellow LEDs and the unit is mounted in a 3…

ESE LX5112U
Self-Setting 12" Analog Clock with ESE, SMPTE/EBU & ASCII Inputs (Sweep/Step)

The LX-5112U is a Wall Mount Analog Clock with a 12" viewing diameter. The LX-5112U is designed to operate as a Time Code Reader or Stand-Alone Clock. It can read, decode and display time information from most any Master Clock or other source of time code. The clock will display time as received…

Tascam CG-1000
Master Clock

The CG-1000 clock generator is built for recording studios, engineers and musicians looking for the maximum audio performance from their gear. It has twelve word clock outputs, two AES/EBU, and two S/PDIF outputs. Two of the clock outputs can output multiples of 1/2Fs, 1/4Fs, 2xFs, 4xFs, and 256x…

ESE LX166U
1" 6-Digit ESE Serial Time Code Slave

The LX-166U is a Time Code display featuring 1" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin…

Tascam CG-2000
Master Clock w/Video Out

The CG-2000 from TASCAM provides reliable clock output with redundant systems for confident on-air broadcast operation. The Video Sync/Master Clock Generator includes four video clock outputs and a video clock input ensure tight synchronization with video devices, including tri-level sync for…

ESE ES101
Master Clock, GPS, Table Top

The ES-101 is a low-cost yet very accurate GPS master clock/time code generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code: ASCII (RS-232C), ESE-TC89 and ESE-TC90.…

ESE ES219A
Black Burst Generator

The ES-219A is a Black-Burst / Sync Generator with four isolated outputs. The unit provides a dependable and stable composite black-burst signal for pre-blacking tapes and/or for general synchronization purposes. The output signal of the ES-219A consists of sync, blanking, reference black setup…

ESE ES171U
*Digital Slave, Remote Display

The ES-171U is a small Time Code display designed to fit in a console mount application. The unit accepts, via a rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code. The ES-171U will automatically determine which code is being…

ESE LX221
Genlockable Black Burst Generator

The LX-221 is a six output Black-Burst / Sync Generator. The unit features enhanced black-burst circuitry and extremely precise stability. LX-221 provides a convenient source of RS-170A composite black-burst for pre-blacking tapes or for synchronization purposes. The unit may be genlocked to an…

ESE LX520U
.55" 60 Min Up Timer-Serial Output (Min & Sec)

The LX520U is a 4-digit, 60 minute timer with .56 amber LED displays. Three front panel buttons (Start, Stop and Reset) are used to control the unit. The timer can also be remotely operated by a rear panel connector.Main Features: •.56" Yellow LED Display •Ruggedized Baked Powdercoat…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

ESE ES-520UE
60 Minute Timer

The ES-520UE is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays.Main Features:• .56" Yellow LED Display…

ESE LX5116U
Self-Setting 16" Analog Clock

The LX-5116U is a Wall Mount Analog Clock with a 16" viewing diameter. The LX-5116U is designed to operate as a Time Code Reader, Stand-Alone Clock or Impulse Clock. It can read, decode and display time information from most any Master Clock or other source of time code. A rear-mounted DIP switch…

ESE ES372U
Console Time Code Display

The ES-372U is a small Time Code display designed to fit in a console mount application. The unit accepts, via a rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code, automatically determining which code is being received. Rear-mounted connector terminals…