Products, Slave Units, Clocks and Timers, Turntables, Broadcast

ESE ES941U
*Time Code Remote Display

The ES-941U Time Code display features 4.0" bright red LED displays housed in a black-textured aluminum wall-mount enclosure (7" H x 19" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code…

ESE ES127U
ESE/SMPTE/EBU/ASCII Serial Slave, Rack

The ES-127U is a twelve-digit Time Code Reader (ESE-TC90, ASCII, SMPTE or EBU) that displays six digits (Hours, Minutes & Seconds) of time and six digits (Month, Day and Year or optionally Day, Month and Year) of date. The displays are one-inch high yellow LEDs and the unit is mounted in a 3…

Numark GROOVETOOL
Cartridge/Stylus for TTUSB Turntable

Keep it old school with this adjustable headshell mount cartridge. You get great sound and strong tracking along with a replaceable diamond tip stylus.Main Features: • 0.6mm spherical diamond tip • Tracking force: 2.5g to 3.5g • Channel separation: 26dB at 1kHz • Output: 2.4Mv • Headshell not included

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

ESE LX166U
1" 6-Digit ESE Serial Time Code Slave

The LX-166U is a Time Code display featuring 1" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin…

ESE ES372U
Console Time Code Display

The ES-372U is a small Time Code display designed to fit in a console mount application. The unit accepts, via a rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code, automatically determining which code is being received. Rear-mounted connector terminals…

ESE ES126U
.55" 12-Digit ESE/SMPTE/EBU/ASCII SerialSlave,Rack

The ES-126U is a twelve-digit Time Code Reader (ESE-TC90, ASCII, SMPTE or EBU) that displays six digits (Hours, Minutes & Seconds) of time and six digits (Month, Day and Year or optionally Day, Month and Year) of date. The displays are .56" high yellow LEDs and the unit is mounted in a 1 3/4"…