Products, DTMF, Site Control, Turntables, Broadcast

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Numark GROOVETOOL
Cartridge/Stylus for TTUSB Turntable

Keep it old school with this adjustable headshell mount cartridge. You get great sound and strong tracking along with a replaceable diamond tip stylus.Main Features: • 0.6mm spherical diamond tip • Tracking force: 2.5g to 3.5g • Channel separation: 26dB at 1kHz • Output: 2.4Mv • Headshell not included

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

CircuitWerkes DR10
Dial Up DTMF Operated Control w/RM01 Rack Mount

Control your equipment from anywhere there is a DTMF phone with the DR-10. Features: audio hybrid lets you control equipment while monitoring external audio; audio in and out are active balanced with gain controls; password protected; control 10 relays (two are DPDT) that can be momentary, latching…

CircuitWerkes DS8
Programmable DTMF Switcher

The DS-8 is a DTMF sequence decoder providing dry closures for eight different tone sequences. Can decode 1 to 4 digit DTMF sequences used by networks for automating closed-circuit feeds and local insertions. Relays can be easily programmed via DTMF phone to operate in momentary, latching, or…

CircuitWerkes DTMF16
TouchTone® Decoder

The CircuitWerkes DTMF-16 remote control is a compact and rugged remote control unit that provides 16 optocoupled outputs using standard TouchTone signals.The DTMF-16 is excellent for controlling remote satellite receivers, network switching equipment, repeaters, or virtually any application where…