Burk Technology Plus-X Dual IP-8 Adaptor
Adapter For To Up To 2 ARC-16 IP-8s (PLUSX DUAL IP-8)
The Burk Plus-X Dual IP-8 Adapter lets you quickly and easily upgrade your legacy ARC-16 without rewiring. It connects to up to two ARC-16 IP-8s using the same DB37 cables as the ARC-16. Not a single channel needs to be rewired to upgrade to the ARC Plus, saving hours of work. The Plus-X Dual IP-8…
Call For AvailabilityBroadcast Tools Silence Sentinel Standard
Silence Monitor
The Broadcast Tools® Silence Sentinel® Standard is designed to monitor any two stereo analog audio sources for silence or an out of phase condition, polarity, generate alarms and transparently switch to a back-up source using mechanically latching relays. Additional features include: front panel…
Call For AvailabilityRFEngineers AB1
Watch Dog Alarm Board
The Alarm Board (AB1) is connected to the Watch Dog via a sub-D9 cable. It converts the WD1's open-collector signals into three 10-Amp SPDT and one 8-Amp DPDT relay outputs.
Call For AvailabilityBroadcast Tools SRC16-PLUS
16-Input Serial Remote Control
The Broadcast Tools SRC-16 Plus is a computer interface to the real world. Connected through an RS-232 or RS-422/485 serial port the SRC-16 can notify your PC software program that any of 16 optically isolated inputs have been opened or closed and allows your software to control any of the 16 SPDT,…
Call For AvailabilityBroadcast Tools WVRC8 Plus
Web Enabled, Dial-up Eight Channel Site Remote Control System
The Broadcast Tools WVRC-8 Plus provides a cost-effective, one rack-unit solution allowing dial-up recordable voice response and web-enabled control and monitoring via a web browser and/or smart phone. The WVRC-8 Plus was designed from a user’s point of view, so all of the basic functionality you…
Call For AvailabilityBurk Technology AP2010 ARC Plus
**AutoPilot Software License ARC-PLUS
The Burk AutoPilot 2010 enables multi-site, PC-based facilities management for the entire line of Burk remote controls, including ARC Plus, ARC-16, GSC3000 and VRC2500. AutoPilot's fully customizable interface makes managing remote sites easy for operators, engineers and managers. Built-in reports…
Call for availabilityBurk Technology BTU-4 Temperature Unit
Temperature Unit - 4 Probe Receiver
The BTU-4D Burk Digital Temperature Unit connects up to four digital temperature sensors to an ARC Solo remote control or to a Plus-X input device in an ARC Plus system. Sensor cables up to 1000 feet long are supported without measurement degradation. The unit also provides a low voltage output…
Call For AvailabilityDavicom CORTEX 360-1
Expandable Main RTU SNMP, Ethernet, Dual Power Supply
Davicom’s new generation of intelligent site management systems is designed to meet the most stringent requirements of the broadcasting and wireless telecommunications industries. These best-in-class, stand-alone monitoring and control units interface easily with virtually any type of remote site…
Call For AvailabilityHenry Engineering AutoSwitch
Stereo Autoswitcher/Silence Sensor
The Henry Engineering AutoSwitch is a multi-purpose stereo audio switcher and silence sensor. It can be used to manually or automatically select between two stereo audio sources. AutoSwitch can be used as a monitor-source switcher. When interfaced to the console's mic-tally logic it will sense when…
Call For AvailabilityBurk Technology ARC Solo
16-Input Remote Control Systemw/ RSI
The ARC Solo includes many of the powerful features of the ARC Plus while offering the simplicity of a self contained remote control unit. 16 meters, status and relays are all available on the rear apron. Macros, email notifications and even the new recordable speech interface are built in. For…
Call for availabilityCircuitWerkes DTMF16
TouchTone® Decoder
The CircuitWerkes DTMF-16 remote control is a compact and rugged remote control unit that provides 16 optocoupled outputs using standard TouchTone signals.The DTMF-16 is excellent for controlling remote satellite receivers, network switching equipment, repeaters, or virtually any application where…
Call for availabilitySine Systems BETABRITE-CLASSIC
Classic LED Display (4 colors)
LED based electronic message display for the MBC1 Message Board Control (not included). Prism display is also available.
Call for availabilitySine Systems AFS3
Audio Failsafe
The Sine Systems AFS-3 audio failsafe is typically used to trigger an alarm on a remote control system or terminate transmission if program audio fails. It monitors one or two audio signals and provides a relay contact closure as long as audio is present on at least one of the two audio inputs.…
Call for availabilityBroadcast Tools NTP Server Sentinel
GIPS Referenced NTP Time Server
The Broadcast Tools NTP Server Sentinel is a standalone ready-to-run GPS referenced NTP time server offering a complete solution for synchronizing time across TCP/IP LANs using NTP. It combines a supplied GPS receiver with an embedded web based controller and is configured and managed via a web…
Call for availabilityBroadcast Tools VAD-4
Voice Alarm Dialer
The VAD-4 is a user programmable four status input multi-number voice/pager auto dialer. The VAD-4 is equipped with four optically isolated status inputs, two temperature sensor ports, power failure input and unbalanced stereo silence sensor, which when tripped, will sequentially dial a pager…
Call For AvailabilityBurk Technology PlusConnect Nautel V
ARC Plus Transmitter Interface
By combining the power of the ARC Plus with the convenience of a direct link to the transmitter, the Burk PlusConnect allows management of the entire transmission plant, studio and IT infrastructure on a single platform.The PlusConnect provides a seamless link between the ARC Plus remote monitoring…
Call for availabilityBurk Technology AC Current Sensor
AC Current Sensor (910-093-001)
The Burk AC Current Sensor (model #910-093-001) allows measurement of current in AC power lines. Use the AC Current Sensor to monitor incoming AC power, or generator output. The unit provides an analog output for connection to a metering input.Key Features • Factory matched and calibrated…
Call for availabilitySine Systems TS1-PS
* Temperature Sensor with Power Supply
Temperature sensor for Sine Systems RFC1B or RFC1RAK.
Call for availabilityCircuitWerkes SITESENTRY2
Web Based 2 Channel Remote Monitor & Controller
The CircuitWerkes SiteSentry2 features an internal Web server that lets you monitor your site from any Web browser in the world. It automatically detects both meter low and meter overload conditions on one or both channels. Its internal temperature sensor can respond to high or low temperature…
Call for availabilityBroadcast Tools AES Audio Sentinel Web
Web-enabled two channel AES/EBU silence monitor
The AES Audio Sentinel®+» Web is a web-enabled two channel AES/EBU silence monitor combined with an integrated 2×1 switcher. It is designed to monitor two AES audio sources, one primary, the other back-up. When silence is detected on the primary AES input it can automatically switch to the back-up…
Call For AvailabilityBroadcast Tools AES Switcher Sentinel 2+1
Web-enabled three channel AES/EBU silence monitor combined with an integrated 3×1 AES
The AES Switcher Sentinel 2+1 is a web-enabled three channel AES/EBU silence monitor combined with an integrated 3×1 AES switcher. It is designed to monitor two AES audio sources and one analog to digital (ADC) audio source. When silence is detected on the primary AES input it can automatically…
Call For AvailabilityBurk Technology Climate Guard
Climate Monitor System
The Burk Climate Guard server room environmental monitor features built-in temperature, light and sound sensors (and boasts a modular design for adding additional sensors) to monitor conditions that can lead to serious IT disasters. Email, SMS and SNMP notifications ensure that responsible…
Call for availabilityDEVA Broadcast DB8000
Silence Monitor with MP3 and IP Audio Backup Players
The best device to fight the dreaded dead air problem is the DB8000 by Deva Broadcast Ltd. It is designed and built to be simple, flexible, reliable and easy for integration with the existing setups: from a single station to large radio networks. The basic principle of DB8000 is that this unit can…
Call For AvailabilityBurk Technology BTS Stack Sensor
Stack Sensor for BTU-4 and GT-4
The BTS Stack Sensor, designed for the Burk BTU4, is an adjustable probe which senses heat within the air ducting of your equipment. The supplied mounting hardware consists of a base and a compression fitting to allow the sensor to be secured at variable depths of up to 9 1/2" inside your ducting.…
Call for availabilityRDL ST-ACR2
Audio Control Relay
The ST-ACR2 is an Audio Controlled Relay in the STICK-ON® series. These products are designed for quick, convenient installation, and reliable operation in a variety of control applications. The ST-ACR2 is designed to switch on line level sources. Two multiturn trimmers are provided. The SENS…
Call for availability