Products, Podcasting Packages, Interfaces and Routers, Podcasting, Broadcast

NOTABOTYET LITT Interface
Interface for Yellowtec Litt Signaling Device

If you are anything like us here at NotaBotYet, then you think the Litt Signaling Device from Yellowtec is one of the coolest things to come out of Germany since the Mercedes (or if you prefer… BMW, Volkswagen, or Oktoberfest). Finally, studios could get rid of their Radio Shack phone strobes and…

Henry Engineering TwinMatch
Interface Amplifier

TwinMatch is a dual-stereo (4-channel) level and impedance converter that interfaces two unbalanced consumer stereo outputs with professional balanced equipment. TwinMatch is ideal for use with a pair of stereo CD players or other "play only" sources. The unit accepts four channels (2 stereo pairs)…

ProCo Sound IT1
Isolation Transformer, Single Channel Box

The Pro Co IT1 Isolation Transformer Unit provides an easy-to-use, high-quality solution for interface problems that demand the high degree of electrical isolation that only a transformer can provide. Transformer isolation minimizes interference from SCR lighting dimmers, radio transmitters and 60…

Broadcast Tools SS2.1MLRBNC
Audio Switcher with BNC Connectors

The Broadcast Tools SS 2.1 MLR/BNC is a transparent, two input, dual output switcher/router with mechanical latching relays and BNC connectors that excels at all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is accomplished with…

RDL FP-BUC2
Balanced to Unbalanced Converter

The FP-BUC2 is the ideal choice for connectorized conversion from balanced to unbalanced audio. This module features two identical active (transformerless) channels. Gold contact XLR jacks are utilized for the balanced input channels. Each output is unbalanced, connected through a gold-plated phono…

DM Engineering MICPRO2
Microphone On/Off Switching Module & 6 Ft Cable

This state-of-the-art, stand-alone microphone switching control makes low cost production mixing boards perform like expensive broadcast consoles.As many microphone channels as your production board has "Insert" jacks for can now be individually controlled by its own Mic-Pro 2. It is also ideal for…

Broadcast Tools SS2.1MLR-TERM
Audio Switcher / Router with Terminal Connectors

The SS 2.1 MLR/Term is a transparent two input, dual output switcher/router with mechanical latching relays and Terminal connectors. The SS 2.1 MLR/Term is perfect for all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is…

NOTABOTYET TALLY-HELPER-100
Interface for Yellowtec Mika Boom Talley Lights - Y16-M10-1

Enter the Tally Helper 100. While it does not solve all of life’s problems, when installing Mika mic booms, it comes pretty darn close! Imagine having a nice clean phoenix-type screw terminal strip sitting there just waiting to have those 5 wires form the Mika mic boom locked down for a good, tight…

Whirlwind IMP2
Direct Box Single Channel

Built rugged on the inside and outside, the Whirlwind IMP2 passive direct box is a mainstay ofpro systems everywhere. It converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal quickly, efficiently and quietly. Whirlwind IMP2 Features: • 1/4" parallel…

CircuitWerkes SILENCER
Muted 50 MS Audio Delay

The SILENCER option board lets you send inaudible DTMF control signals via your RPU, satellite, dedicated loops or standard dial-up phone lines. Your talent or producer in the field can fire IDs, start breaks, light up an attention flasher, or control just about anything right in the program path,…

Broadcast Tools RM-3 Rack Shelf
Rack Shelf Two Unit- 19"

RM-3 allows mounting of one or two small profile type BTI products horizontally in one rack space. The blue rack shelf is flanged for strength and is equipped with eight 6-32 stand-offs. The front panel is pre-drilled with six 1/4" holes that may be used for ventilation, or to mount user-provided…

Broadcast Tools SS4.1-MLR
4 inputsingle output switcher/router

The SS 4.1 MLR is a transparent four input, one output switcher/router with mechanical latching relays. The SS 4.1 MLR is perfect for all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is accomplished with mechanical latching gold…

Audinate Dante AVIO 2ch Output Adapter
Dante AVIO 2 Ch Output Adapter

Dante AVIO Analog Outputs let you drive analog line-level products you already own from any Dante-connected system. Bring your amplifiers, powered speakers and more to the world of audio networking with Dante AVIO. . Main Features: • Send audio to analog power amplifiers and powered speakers over a…

Broadcast Tools COA-9X DS MAX
Connect-O-Adapter 9 ABC XDS; WWI IDC MAX StarGuide II/III Analog and AES Audio

Need to convert the DB-9 connector to the euroblock removable screw terminals? The Connect O' Adapter 9 XDS/MAX will do the job. The COA-9 XDS/MAX is designed to plug into the male 9-pin D-Sub connector on the ABC/XDS, WW1 IDC "MAX" or StarGuide II / III.

Broadcast Tools AUDIOSENTINEL-4-WEB
Web-enabled 4 Channel stereo, 8 Channel mono balanced analog silence sensor

The Audio Sentinel® 4 >> Web is a web-enabled four channel stereo/eight mono channel silence monitor. All four stereo inputs are balanced and feature pluggable screw terminal-block and StudioHub+ compatible RJ45 inputs wired in parallel for ease of wiring. Each stereo input can be configured…

DBX PB48
Patchbay, 1/4" TRS-Balanced

The dbx PB48 is a well-built, reliable patchbay that just works, all the time, every time.It's user-configurable for half-normalled or de-normalled, with 48 1/4" points on the front panel, connected to 48 1/4" points on the rear. The PB48 is a rugged, noise-free, versatile patchbay designed to…

Studio Hub ADAPT-MINIF
RJ45F to 1/8'' Unbalanced, Female 8''

Adapts SH+ cables to source equipment. Mini connector is wired unbalanced to the RJ-45 connector so that left and right appear as discreet unbalanced stereo signals.

Broadcast Tools SMARTRELAY4
Smart Relay 4 for Converting Closures to a Pulse (SR-4)

The Broadcast Tools Smart Relay 4 is the perfect tool for converting sustained network closures to a pulse, providing four independent DPDT relays and eight optically isolated 5 to 24 vdc wet or dry inputs along with 15 logic functions.User programmable logic and pulse stretching (delays) may be…

DM Engineering STUDIOSLAVE
Relay Switching Device

The STUDIOSLAVE Auxiliary Relay Pack is a microprocessor based switching and control interface for broadcast studio and control rooms where multiple and various isolated outputs are required to operate from one or more control inputs. Input and output connectors are Eurostyle pluggable types, and…

ART CLEANBOXII
Hum Eliminator

"Hum" in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called "ground loops". A safe, effective way to…

ART CLEANBOXPRO
2 Channel Stereo Converter

The ART CLEANBoxPro dual channel level converter provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. It offers stereo level controls to optimize signal levels, and features XLR…

RDL HR-ADC1
Analog to Digital Converter

The HR-ADC1 is a broadcast quality A/D converter that provides exceptional audio accuracy and clarity with any audio source or style. Superior analog performance fine tuned through audiophile listening practices produces very low distortion (0.0006%), exceedingly low noise (-135 dB) and remarkably…

RDL ST-SX4
4 Input Switcher

The ST-SX4 accepts up to four unbalanced audio sources. Any of these sources may be selected to feed the output, or all sources may be switched off. The output from the ST-SX4 is unbalanced. Control of the module is accomplished through a single input terminal. Connection of a specified resistance…

RDL HR-DSX4
Digital Audio Selector

The RDL HR-DSX4 is the ideal choice in installations requiring high quality source selection between digital audio signals, offering solid-state switching to select one of four inputs. Each input may be fed through one of three jacks: S/PDIF optical, S/PDIF (or AES-3ID) coaxial or AES/EBU. The…

Broadcast Devices ATB300-1
Audio Tool Box 4 AES I/O

The Broadcast Devices ATB-300 is a rack-mounted solution to switching and routing in the digital or analog domain. The ATB-300 can be ordered in ten different configurations. The basic configuration is the ATB-300-1 that accepts four AES3 inputs that can be switched and routed to four AES3 outputs.…