Bing ads convertion tracker
  • Products (69)

Products, Amplifiers, Signal Processing, RDL, Podcasting Packages, Interfaces and Routers, Podcasting, Broadcast

View: Grid | List

RDL ST-RX2
Audio Routing Switcher

The ST-RX2 has a single line-level audio input and two line-level audio outputs. In the absence of a control input, the NORMAL module output is fed from the audio input. When the TRIG control terminal is connected to ground, the input audio is fed to the SELECT output and the NORMAL output is…

Call for availability

List Price

$163.17

$116.30

Add to Cart Add to Quote

RDL ST-VOX1
Audio Control, Vox Relay

The ST-VOX1 is an Audio Controlled Relay in the STICK-ON® series. When used in intercom or talkback applications, the ST-VOX1 may be triggered directly from an unbalanced microphone. In many such installations the microphone or other audio source must be preamplified, making the ST-VOX1 an…

Call for availability

List Price

$161.04

$114.78

Add to Cart Add to Quote

RDL HR-MCP2
Dual Channel Mic Compressor

The Radio Design Labs HR-MCP2 dual-channel microphone compressor offers full studio-quality low-noise performance at any gain setting while delivering a consistent audio output level over wide variations (up to 25 dB) in the microphone input level. Rear-panel switches let you set each output to mic…

Call for availability

List Price

$773.29

$551.17

Add to Cart Add to Quote

RDL STD-150
Divider / Combiner

Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits combining stereo signals into mono inputs, splitting mono signals to multiple inputs, and even combining microphones with…

Call for availability

List Price

$86.33

$61.54

Add to Cart Add to Quote

RDL FP-BUC2
Balanced to Unbalanced Converter

The FP-BUC2 is the ideal choice for connectorized conversion from balanced to unbalanced audio. This module features two identical active (transformerless) channels. Gold contact XLR jacks are utilized for the balanced input channels. Each output is unbalanced, connected through a gold-plated phono…

Call for availability

List Price

$273.37

$194.84

Add to Cart Add to Quote

RDL RU-SH1
Stereo Headphone Amp- Rack-up Series, Level Control

The RU-SH1 is a dual channel headphone amplifier that can drive high or low impedance headsets in stereo or mono. If features balanced/unbalanced left and right inputs that accept operating levels between -20 dBV and +20 dBu. It mounts in RACK-UP series rack mounts or in various RDL mounting…

Call for availability

List Price

$241.46

$172.11

Add to Cart Add to Quote

RDL ST-UBA2
Interface Amplifier, Unbalanced to Balanced

The Radio Design Labs STU-BA2 two-channel interface amplifier is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance audio from CD players, cassette decks, computer sound cards, televisions, and a wide variety of…

Call for availability

List Price

$238.30

$169.86

Add to Cart Add to Quote

RDL TX-J2
Unbalanced Input Transformer

The RDL TXJ2 is an unbalanced-to-balanced transformer with two unbalanced RCA inputs and one balanced screw terminal output.Features: • Mix two unbalanced audio signals to mono balanced • Combine stereo into mono with balanced output • Unbalanced to balanced conversion without gain…

Call for availability

List Price

$91.41

$65.14

Add to Cart Add to Quote

RDL RU-ADA4D
2X4 Stereo 1X8 Mono Distribution Amplifier

The RU-ADA4D is a four channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide up to eight distributed mono signals. The inputs and outputs are connected on rear-panel detachable terminal blocks. Each…

Call for availability

List Price

$392.89

$280.04

Add to Cart Add to Quote

RDL HR-DAC1
D to A Converter - 24 Bit / 192 kHz

The HR-DAC1 is the ideal choice in installations requiring high quality analog audio from an AES/EBU, AES-3ID or S/PDIF digital audio source. The HR-DAC1 automatically detects a valid input on any of the four input jacks: S/PDIF optical, S/PDIF coaxial, AES-3ID or AES/EBU. The AES/EBU input is 110…

Call for availability

List Price

$741.31

$528.38

Add to Cart Add to Quote

RDL SF-UN1
USB to Network Interface - Dante

The SF-UN1 is a digital audio interface that converts a USB stereo digital audio source to two Dante network audio channels. The SF-UN1 automatically detects a valid USB input. The input is decoded, re-clocked and transmitted to the Dante network. The module provides automatic sample rate…

Call For Availability

List Price

$634.24

$452.07

Add to Cart Add to Quote

RDL DDB-BN22
Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE - Black

The DDB-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DDB-BN22. Each XLR input provides three switches that may be set from the front of the…

Call For Availability

List Price

$854.00

$608.70

Add to Cart Add to Quote

RDL DD-BN31
Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE - White

The DD-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required…

Call For Availability

List Price

$888.71

$633.43

Add to Cart Add to Quote

RDL HR-ADC1
Analog to Digital Converter

The HR-ADC1 is a broadcast quality A/D converter that provides exceptional audio accuracy and clarity with any audio source or style. Superior analog performance fine tuned through audiophile listening practices produces very low distortion (0.0006%), exceedingly low noise (-135 dB) and remarkably…

Call for availability

List Price

$967.04

$689.28

Add to Cart Add to Quote

RDL STP-1
Dual Attenuator

The STP-1 is a pair of convenient attenuator pads that can be located at the precise location that attenuation is needed. The low-cost STP-1 eliminates the costly labor of figuring and assembling fixed pads. Multi-turn trimmers in the STP-1 permit precise adjustment of levels without the need to…

Call for availability

List Price

$93.87

$66.91

Add to Cart Add to Quote

RDL SF-DN4
Digital Audio to Network Interface - Dante

The SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels. The SF-DN4 automatically detects a valid input on any of the three input jacks: S/PDIF optical, S/PDIF coaxial, or AES/EBU XLR. The input is decoded, re-clocked and…

Call For Availability

List Price

$766.31

$546.20

Add to Cart Add to Quote

RDL ST-VP1
Voice Over Module

The ST-VP1 is intended for voice-over paging with user adjusted and controlled FADE or CUT between two input sources. This unit is also perfect for voice-overs where precise and consistent fade levels are required. Automatic operation can be achieved when used in conjuction with RDL´s® ST-ACR…

Call for availability

List Price

$211.68

$150.88

Add to Cart Add to Quote

RDL STD-600
600 OHM Divider / Combiner

Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits combining stereo signals into mono inputs, splitting mono signals to multiple inputs, and even combining microphones with…

Call for availability

List Price

$86.59

$61.71

Add to Cart Add to Quote

RDL PS24AS
24 VDC Switching Power Supply, North American AC Plug, 500 mA, dc Plug

The RDL PS-24AS is a 24 Vdc switching power supply with a North American AC plug.RDL PS-24AS Specifications: • Input: 100 to 240 VAC • Output: 24 Vdc, 500 mA (UL, CSA) • Dimensions: 1.65 in. (4.2 cm) x 2.75 in. (7 cm) x 1.45 in. (3.7 cm), nominal • Efficiency: ENERGY STAR Level IV

In Stock

List Price

$33.64

$23.97

Add to Cart Add to Quote

RDL DDB-BN2M
Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE - Black

The DDB-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN2M. Each XLR input provides three switches that…

Call For Availability

List Price

$795.27

$566.84

Add to Cart Add to Quote

RDL STA-1M
Audio Line Amp

The STA-1M allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line. The circuit design allows the input to accept either balanced or unbalanced signals, of either high or low impedance. This is an instrumentation type input stage which will amplify the…

Call for availability

List Price

$168.71

$120.25

Add to Cart Add to Quote

RDL FP-PA20
Audio Power Amplifier 8 OHM Output

The FP-PA20 features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. The output…

Call for availability

List Price

$226.65

$161.55

Add to Cart Add to Quote

RDL RU-MLD4
1X4 Mic/Line Distribution Amp

The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line level signal. Each of the four outputs provides…

Call for availability

List Price

$407.86

$290.71

Add to Cart Add to Quote

RDL FP-UBC6
Converter, Unbalanced to Balanced, 6 Channel

The FP-UBC6 is the ideal choice for multiple channel connectorized conversion from unbalanced to balanced audio. This module features six identical channels, making it ideally suited to converting consumer 6-channel surround sound into the professional audio format. Each input channel is…

Call for availability

List Price

$587.95

$419.08

Add to Cart Add to Quote

RDL FP-PA20A
Audio Power Amp 70V and 100V Output

The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. Both a 70 V…

Call for availability

List Price

$231.77

$165.20

Add to Cart Add to Quote
View: Grid | List
1 - 25 of 69 Items