Products, ERI, Lowell, Flash Recorders and Players, Racks and Cases, Cable - RF and Accessories, Recorders and Players, Broadcast

Lowell US-214
Rack Utility Shelf-2U, 14in D, Blk

Rackmount utility shelf with solid base and rear notches for mounting an optional 12" power strip.Main Features:• Height: 2U • Width: 19 in. (17.56 in. useable) • Depth: 10.75 in. or 14 in. • Material: 16-gauge steel • Finish: Smooth black • Front and rear flanges • Load Capacity: 50 lbs. • Notched…

Lowell US-314
Rack Utility Shelf-3U, 14in D, Blk

Steel utility shelf with solid base mounts to 19" E.I.A. compliant rack to support non-rackmount equipment such as consumer electronics, power supplies, or chassis style components. Main Features: • Height: 3U • Width: 19 in. (17.56 in. useable) • Depth: 10.75 in. or 14 in. • Material: 16-gauge…

Lowell LER-4422
Rack-Enclosed 44U, 22in Deep, 1pr Adj Rails, Rear Door, Black

The LER is engineered as a stand-alone cabinet with beveled corners and welded sides (not removable) for solid security and protection. This 44U x 22"D stand-alone floor rack with adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions.Main…

Lowell FS18-16
Wall Shelf-Flat Ship-18in W x 16in D, Blk

The FS Series steel wall shelf folds flat for efficient shipping and convenient warehousing, then unfolds to the service position for quick installation with flanges that insert into rear panel cutouts. Mounts with equipment platform up or down.

Lowell LXR-3021
Slim Knockdown Rack, 30U, 21D

The LXR is a slim 19.21" wide, which allows it to fit where a standard rack may not, such as inside cabinetry or credenzas, but it also serves well as a freestanding floor rack. A variety of options allow multiple configurations—from the basic open frame to a fully enclosed cabinet. Corner post…

Lowell UDE-214
Rackmount Utility Drawer, 2U x 14.437inD, 50lbs capacity

Rackmount utility drawer by Lowell.Main Features:• Rack Space: 2U• Width: 19.00 in. • Depth: 15.07 in. (with handle) • 16-gauge steel • Smooth black semi-gloss finish • Rear bushing • Integral handle • Load capacity 50 lbs. • Non-locking*Please Note: The picture above shows the UDE-314.

Lowell LFR-4427
Rack-Enclosed-44U, 27in Deep, 1pr Fixed Rails, Rear Door, Black

The LFR is the most versatile, cost-effective, fixed rail floor rack in its class. The unique design features welded brackets in the back of the cabinet for mounting optional (semi-adjustable) rear rails or accessories. It comes with welded sides (not removable) and fixed position front rails that…

Lowell LLR-1218-B
Rack-Laminate-12U, 18in Deep, Unassembled, Blk

The LLR laminated rack is made of a sturdy 5/8" wood composite that’s been treated to a premium Cathedral Black woodgrain laminate finish. This rack is especially well suited for home offices, studios and entertainment areas.Main Features:• 5/8 in. wood composite top, sides, base • Open front and…

Lowell UDE-314
Rackmount Utility Drawer, 3U x 14.437inD, 50lbs capacity

Rackmount utility drawer by Lowell.Main Features:• Rack Space: 3U• Width: 19.00 in. • Depth: 15.07 in. (with handle) • 16-gauge steel • Smooth black semi-gloss finish • Rear bushing • Integral handle • Load capacity 50 lbs. • Non-locking

ERI ACX150-10SE
*Elbow, 1 5/8" 90 Degree, Flanged

1-5/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

Lowell AP-2CC 12 Pack
Rack Panel-Blank-2U, 16ga Flanged Aluminum, 12pak, Textured Blk

Blank aluminum panel for 19" E.I.A. racks is ideal for applications where the light weight and environmental attributes of alluminum are specified, and where the additional strength of a flange is needed. Main Features: • 12 Pack • Material: 16-gauge aluminum • Finish: Black wrinkle • Flange: 0.625…

ERI STD150-21
*1-5/8" 50 ohm 20' Line Section

1-5/8-inch, 50 ohm, 20-foot standard line section, unflanged.

Lowell SEP-4
Rack Panel-Blank-4U, 18-gauge Flanged Steel, Blk

Steel rackmount panel with flange.Main Features: • Material: 18-gauge steel • Finish: Black semi-gloss • Flange: 0.625 in. • Width: 19 in. • Height: 1/3U–6U

Lowell LGR-4432
Rack-Gangable-44U, 32in Deep, 2pr Rails, Rear Door, Blk

The LGR rack is engineered for multibay applications where routing cable bundles among multiple racks is of primary importance. The open design features a variety of conveniently spaced holes for lacing and wiring.Main Features:• Configurable top has 10U opening for 19 in. panels (includes solid…

ERI RLA300-11-H
*3-1/8 Vertical Spring Hanger

3-1/8 hinged vertical spring hanger, supports the transmission line, prevents lateral motion, and accommodates differential expansion and contraction. Use at 10 foot intervals. Hinged to open from left or right side to save installation labor. Includes 1/2-inch mounting hardware.

Lowell AP-1CC 12 Pack
Rack Panel-Blank-1U, 16ga Flanged Aluminum, 12pak, Textured Blk

Blank aluminum panel for 19" E.I.A. racks is ideal for applications where the light weight and environmental attributes of alluminum are specified, and where the additional strength of a flange is needed. Main Features:• 12pack• Material: 16-gauge aluminum • Finish: Black wrinkle • Flange: 0.625…

Lowell LPR-2122
Rack-Portable-21U, 22in Deep, Solid Door, Blk

The LPR portable rack has heavy duty swivel casters and is ideal for schools and similar facilities in need of mobile security for electronics. Includes front and rear doors with keyed locks.Main Features:• Solid steel top • Solid steel base with 4 heavy duty swivel casters • Welded sides with…

Lowell LXR-3821
Rack-Slim Knockdown, 38U, 21D

LXR 19" slim rack is made to fit where a standard rack may not, such as inside millwork. Made in the U.S.A. with certified U.S. steel. Black semi-gloss powder epoxy finish. The LXR-3821 38U x 21"D slim rack for 19 inch equipment is ideal for cabinets, closets or credenzas where space is at a…

Lowell LER-4427
Rack-Enclosed-44U, 27in Deep, 1pr Adj Rails, Rear Door, Blk

The LER is engineered as a stand-alone cabinet with beveled corners and welded sides (not removable) for solid security and protection. The LER-4427 is a fully welded certified U.S. steel, 16-gauge frame with 14-ga. bottom reinforced at load-bearing junctions for robust support, strength equivalent…

ERI RLA100-11-H
*1-5/8" Vertical Spring Hanger

1-5/8-inch vertical spring hanger, accommodates line expansion and contraction. Use at 50 foot intervals. Mounts to 9/16-inch diameter hole with included 1/2-inch diameter bolt or to angle adapters

ERI ACX050-10SE
90 Degree Elbow Flanged 7/8"

7/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Formerly Part Number: 1060A.

ERI RLA350-NF
*Reducer 50 ohm 3-1/8" to type N Female

Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.

ERI ACX350-10SE-2
*3-1/8-inch, 50 ohm, 90 Degree Miter Elbow

3-1/8-inch, 50 ohm, 90 degree reinforced miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

ERI STD350-1
3-1/8" Rigid Line, Flanged Both Ends, 20 ft.

ERI has long been the industry leader in Radio Broadcast Systems. Electronics Research offers a complete line of products and services to fulfill your Radio Braodcast Systems needs. From Radio Filters and Combiners to AM and FM Antenna Systems, Electronics Research, Inc. can meet your requirements…

ERI ACX350-20
*Inner Connector, 3 1/8" Bullet

3-1/8-inch, 50 ohm standard inner connector.