Products, Portable Racks, Cartridges and Styli, Cable - RF and Accessories, Racks and Cases, Turntables, Broadcast

SKB SKBR912U20
12U Shock Mount Rack

This SKB 12U rack case is 20 inches deep and designed for the heaviest demands of the road.Based on the Ultimate Strength Series design, this Roto Shockmount Rack Case provides added protection for sensitive gear. With an internal frame mounted on adjustable elastomer shock absorbers on all eight…

SKB SKB19-RSF4U
Laptop/4U Rack with Two Step Handle and In-Line Skate Wheels

The SKB 4U Studio Flyer (1SKB19-RSF4U) is the perfect solution for housing your portable recording studio, offering 4U of rack space for recording gear and a larger top surface for laptops or LCD screens.Both the thick convoluted foam padding in the lid and the innovative cleat system secure the…

Andrew HJ5-50
7/8" HELIAX® Standard Air Dielectric Coaxial Cable

HJ5-50, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 7/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

Andrew LDF4-50A
1/2" Foam Dielectric Cable, Per Foot

LDF4-50A, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/2 in, black PE jacket The Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission cable…

Andrew HJ7-50A
1 5/8" HELIAX® Standard Air Dielectric Coaxial Cable

HJ7-50A, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

Myat 201-014
Flange Adaptor

Flange adapter, clamp-type, 1 5/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 1.25 lbs.

Andrew 241088-4
*Grounding Kit for 1 5/8" Cable

Standard Grounding Kit for 1-5/8 in corrugated coaxial cable

Gator Cases G-TOUR-20X25
ATA Wood Flight Case for Mixers

The Gator G-TOUR 20X25 is a rugged 20" x 25" x 8" ATA wood flight case for mixers boasting stackable ball corners for tight spaces.Gator G-TOUR 20X25 Features and Specifications: • Fully adjustable interior to hold mixers in place during transport • Red recessed twist latches and spring-loaded…

Andrew 403942
*Wall Roof Feed Thru, 3"

Single Entrance Panel for 3 in coaxial cable

Numark GROOVETOOL
Cartridge/Stylus for TTUSB Turntable

Keep it old school with this adjustable headshell mount cartridge. You get great sound and strong tracking along with a replaceable diamond tip stylus.Main Features: • 0.6mm spherical diamond tip • Tracking force: 2.5g to 3.5g • Channel separation: 26dB at 1kHz • Output: 2.4Mv • Headshell not included

Andrew HJ8-50B
*3" HELIAX® Standard Air Dielectric Coaxial Cable

HJ8-50B, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 3 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

Myat 301-010
* Insulator Connector, 3 1/8" Bullet

Anchor insulator connector, 3 1/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 12 oz.

Andrew AVA7-50
1 5/8" HELIAX® Andrew Virtual Air™ Coaxial Cable

AVA7-50, HELIAX® Andrew Virtual Air™ Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket Construction Materials Jacket Material PE Outer Conductor Material Corrugated copper Dielectric Material Foam PE …

ERI ACX050-10SE
90 Degree Elbow Flanged 7/8"

7/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Formerly Part Number: 1060A.

Myat 201-010
* Insulator Connector, 1 5/8" Bullet

Anchor insulator connector, 1 5/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 3.5 oz.

Myat 301-004-XXX
Line Assembly Flanged (per inch)

Unflanged line assembly of customer specified length, 20' typical, 3 1/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 2.5 lbs per foot. Specify length in inches.

Myat 301-004
20 ft. 3-1/8" Rigid Line, Unflanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 301-014
* Flange Adapter, 3 1/8" Clamp Type for Indoor Use

Flange adapter, clamp-type, 3 1/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 2.65 lbs.

Myat 301-021
* Elbow, 3 1/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 3 1/8" 50 ohm. Includes anchor insulator connector with anti-splitting device, "O" ring, and hardware kit. Approx. Wt. 8.8 lbs.

Myat 301-025
* Elbow, 3 1/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 3 1/8" 50 ohm. Approx. Wt. 3.25 lbs.

Andrew AL7E158-PS
1/5/8'' EIA Flange Connector For AVA7-50 HELIAX

1-5/8 in EIA Flange for 1-5/8 in AVA7-50, AL7-50 and LDF7-50 cable General Specifications Interface 1-5/8 in EIA Flange Body Style Straight Brand HELIAX® Mounting Angle Straight …

Andrew LDF2-50
*3/8 Foam Dielectric Cable, LDF2-50A, Per Foot

LDF2-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 3/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission cable and…

Myat 301-023
90 Degree Elbow Flanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Andrew 31771-4
*Threaded Rod Support Kit, 12" Length, 5 Pieces

Hardware Kit, includes 3/8 in threaded rod, ceiling mounting plate, nuts and washers

Andrew 204989-7
Standard Grounding Kit 5"

Standard Grounding Kit for 5 in corrugated coaxial cable