Products, Portable Racks, Cartridges and Styli, Automation, Cable - RF and Accessories, Racks and Cases, Turntables, Broadcast

ERI ACX350-20
*Inner Connector, 3 1/8" Bullet

3-1/8-inch, 50 ohm standard inner connector.

ERI STD350-31
3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

ERI ACX350-10SE
*Elbow, 3 1/8" 90 Degree, Flanged

Type Number: ACX350-10SE 3-1/8-inch, 50 ohm, 90 degree miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Not reinforced.

Andrew SEC-378
* 7/8" Cable Entry Boot 4" (102 mm)

The Andrew SEC-378 is a SnapSeal entry cushion with 3 holes for 7/8-inch corrugated coaxial cable.

Andrew RLA100-21
1 5/8'' Hardware Kit

1-5/8-inch hardware kit, includes O-ring, silicone lubricant, nuts, bolts, and lock washers for one flange joint. Formerly Part Number 69225-2.

Andrew 204673-4
4" Wall/Roof Feed Plate, 4 Openings

Multiple entrance wall/roof feed-thru plate with (4) 4” (102 mm) openings.Use with the corresponding size rubber cable boots (sold separately). Dimensions Height 241.30 mm | 9.50 in Width 647.70 mm | 25.50 in General…

Andrew 204673-8
4" Wall/Roof Feed Plate, 8 Openings

Multiple entrance wall/roof feed-thru plate with (8) 4” (102 mm) openings.Use with the corresponding size rubber cable boots (sold separately).

Andrew 243095-2
*Hanger, Click-On Hardware Kit, 1 1/4" -1 5/8"

Hardware Kit for 1-1/4 in or 1-5/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware

Andrew 243095-5
*Hanger, Click-On Hardware Kit, 1/2" - 7/8", 2 Stack

Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware

Andrew 245174
Weatherproof Kit, Cold Shrink 1/2" - 7/8"

Andrew 3M™ Cold Shrink™ Kit for 1/2 in through 7/8 in antenna and device connections

Andrew 245175
Weatherproof Kit, Cold Shrink 2 1/4"

Andrew 3M™ Cold Shrink™ Kit for 2-1/4 in to 1/4 in through 1/2 in connections

Andrew 29961
Hoist Grip 1 1/4" Cable

Lace-up Hoisting Grip for 1-1/4 in coaxial cable

Andrew 31670-2
*Round Member Adapter Kit, 10 Pieces 2-3"

Andrew round member adapter kit, 10 pieces, 2-3".

Andrew 31670-3
Round Member Adaptor Kit qty. 10 for 3-inch to 4-inch pipes

Andrew round member adapter kit, 10 pieces, 3-4".

Andrew 31670-4
Round Member Adapter Kit, 10 Pieces 4-5"

Andrew round member adapter kit, 10 pieces, 4-5"

Andrew 42396A1
*Hangers, 1 1/4" Standard - Kit of 10

Butterfly Hanger for 1-1/4 in coaxial cable and elliptical waveguide 64. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew L12PDF
*7-16 DIN Female for 2-1/4" LDF12-50

7-16 DIN Female for 2-1/4 in LDF12-50 cable

Andrew L6PNM-RPC
*N Male Connector for 1-1 1/4" Foam

Type N Male OnePiece™ for 1-1/4 in LDF6-50 cable

ERI RLA000-21
*7/8-inch Hardware Kit

7/8-inch hardware kit, includes O-ring, silicone lubricant, nuts, bolts, and lock washers for one flange joint. Formerly part number 66748-6.

ERI STD050-52
*7/8" 50 ohm Male-to-Male Adapter

7/8-inch, 50 ohm, male-to-male adapter, no inner connectors, includes flange hardware kit, 6-inch length. Formerly Part Number: 243972.

ERI STD150-52
*1 5/8" Male To Male Adapter, 6" Length

The ERI STD150-52 is a 1-5/8-inch, 50 ohm, male-to-male adapter with no inner connectors. Six inches long, it includes a flange hardware kit.

Myat 201-011
* O Ring for 1 5/8" Flange

"O" ring, silicone, for 1 5/8" flange connections.

Myat 301-011
O Ring

"O" ring, silicone, for 3 1/8" flange connections.