Products, Rack Hardware, Portable Racks, Cartridges and Styli, Cable - RF and Accessories, Racks and Cases, Turntables, Broadcast

Middle Atlantic HW100
100 Screws / Washers

Here's a large quantity of 100 3/4" long screws with 10-32 threads. A pre-installed nylon cup washer speeds installation while providing a clean, professional appearance.

Middle Atlantic TBIT
Driver Bit For Security Screws

Star post drive bit, works with Middle Atlantic security screws (model #HTX)

SKB SKB19-AC1
Rack Mount Hardware-Screws/Retainer Clips

The SKB19-AC1 is a bag of 12 screws and clips for mounting rack gear in SKB rack products.

SKB SKB19-RSF4U
Laptop/4U Rack with Two Step Handle and In-Line Skate Wheels

The SKB 4U Studio Flyer (1SKB19-RSF4U) is the perfect solution for housing your portable recording studio, offering 4U of rack space for recording gear and a larger top surface for laptops or LCD screens.Both the thick convoluted foam padding in the lid and the innovative cleat system secure the…

SKB SKBR912U20
12U Shock Mount Rack

This SKB 12U rack case is 20 inches deep and designed for the heaviest demands of the road.Based on the Ultimate Strength Series design, this Roto Shockmount Rack Case provides added protection for sensitive gear. With an internal frame mounted on adjustable elastomer shock absorbers on all eight…

Andrew AVA7-50
1 5/8" HELIAX® Andrew Virtual Air™ Coaxial Cable

AVA7-50, HELIAX® Andrew Virtual Air™ Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket Construction Materials Jacket Material PE Outer Conductor Material Corrugated copper Dielectric Material Foam PE …

Andrew HJ5-50
7/8" HELIAX® Standard Air Dielectric Coaxial Cable

HJ5-50, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 7/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

Andrew AL7E158-PS
1/5/8'' EIA Flange Connector For AVA7-50 HELIAX

1-5/8 in EIA Flange for 1-5/8 in AVA7-50, AL7-50 and LDF7-50 cable General Specifications Interface 1-5/8 in EIA Flange Body Style Straight Brand HELIAX® Mounting Angle Straight …

Middle Atlantic HTX
50 Pc Security Rack Screw /Washers

50 pack of security screws feature a star post drive. 10-32 by 3/4", black oxide finish, comes with factory installed nylon washers. Star post drive bits available (model #TBIT).

Andrew HJ7-50A
1 5/8" HELIAX® Standard Air Dielectric Coaxial Cable

HJ7-50A, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

Andrew 241088-1
*Grounding Kit, 1/2" Attached 2 Hole Lug

Standard Grounding Kit for 1/2 in corrugated coaxial cable Dimensions Nominal Size 1/2 in Waveguide Size WR42 | WG20 | R220 | WR51 | WG19 | R180 Bonding Conductor Length 609.6 mm | 24 in Cable Jacketing Removal…

ERI RLA300-11-H
*3-1/8 Vertical Spring Hanger

3-1/8 hinged vertical spring hanger, supports the transmission line, prevents lateral motion, and accommodates differential expansion and contraction. Use at 10 foot intervals. Hinged to open from left or right side to save installation labor. Includes 1/2-inch mounting hardware.

Andrew LDF4-50A
1/2" Foam Dielectric Cable, Per Foot

LDF4-50A, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/2 in, black PE jacket The Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission cable…

Gator Cases G-TOUR16CAST-24D
ATA 16-Space Rack Amp Case W/Casters

This virtually indestructible 16-space Gator G-Tour rolling case offers 24" rackable depth, 12mm plywood construction with PVC exterior, 3.2mm thick front and rear rack rails, tongue and groove aluminum valances plus Penn Elcom recessed MOL twist latches and spring-loaded rubber-gripped handles.…

Melfast RST-100
100 Phillip Truss Rack Screws W/Washer & Dog "Pilot" Pt

Bag of 100 Phillip truss rack screws with washers. Bags of 25 and 500 are also available.

Middle Atlantic HP
Rack Screws - 100

Our HP series rackscrews are 3/4" long with 10-32 threads and feature an attractive Phillips truss head for a clean modern appearance. All screws include factory installed nylon washers for convenience and are heat-treated for strength and to resist against stripping. Finished in black oxide.

Myat 301-014
* Flange Adapter, 3 1/8" Clamp Type for Indoor Use

Flange adapter, clamp-type, 3 1/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 2.65 lbs.

Andrew 31766A10
*Hanger, 4" Standard - Kit Of 10

Butterfly Hanger for 4 in coaxial cable,kit of 10. Product may differ from photo. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew 245173
Weatherproof Kit, Cold Shrink 1 5/8"

Andrew 3M™ Cold Shrink™ Kit for 1-5/8 in or 1/4 in to 1/4 in through 1/2 in connections

Andrew HJ8-50B
*3" HELIAX® Standard Air Dielectric Coaxial Cable

HJ8-50B, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 3 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

ERI RLA350-NF
*Reducer 50 ohm 3-1/8" to type N Female

Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.

Andrew 40394-1
*Wall Roof Feed Thru, 4"

Single Entrance Panel for 4 in coaxial cable

Myat 201-010
* Insulator Connector, 1 5/8" Bullet

Anchor insulator connector, 1 5/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 3.5 oz.

Myat 201-008
*FIXED FLANGE, 1 5/8" EIA , SOLDER OR WELD

Fixed flange, 1 5/8", brass. Can be silver brazed or welded. Includes silver braze insert ring. Approx. Wt. 12 oz.

Numark GROOVETOOL
Cartridge/Stylus for TTUSB Turntable

Keep it old school with this adjustable headshell mount cartridge. You get great sound and strong tracking along with a replaceable diamond tip stylus.Main Features: • 0.6mm spherical diamond tip • Tracking force: 2.5g to 3.5g • Channel separation: 26dB at 1kHz • Output: 2.4Mv • Headshell not included