Products, Cartridges and Styli, Preamps, Amplifiers, Turntables, Broadcast

Digital Audio Labs Livemix Dante Input Module
Livemix Dante Option card for MIX-16

The LM-DANTE-EXP option card for the MIX-16 is for users with digital audio on a Dante network. Once your audio is on the network, use the Livemix CS-DUO to configure the network for use with the Livemix system.Main Features:• Option card for MIX-16 (below) • Easy configuration via…

RDL RU-SH1
Stereo Headphone Amp- Rack-up Series, Level Control

The RU-SH1 is a dual channel headphone amplifier that can drive high or low impedance headsets in stereo or mono. If features balanced/unbalanced left and right inputs that accept operating levels between -20 dBV and +20 dBu. It mounts in RACK-UP series rack mounts or in various RDL mounting…

AEQ DA-26
1X12, 2x6 Distribution Amp

This compact (1RU) rack-mountable analog audio distribution amplifier feeds one mono input to 12 mono outputs or two stereo inputs to six stereo outputs. For ultimate flexibility, it offers independent gain control for each output. All inputs and outputs are transformer balanced for greater system…

Drawmer DA6
DA: 1 stereo XLR in /6 stereo XLR out

The Drawmer DA-6 is a 6-channel stereo (or 12-channel mono) distribution amplifier featuring XLR balanced inputs and outputs.The stereo input features individual left/right level controls with LED bargraph metering to enable the correct balancing of stereo material or two mono signals. Each of the…

Broadcast Tools AES 2X6DA
Two Input AES/EBU Distribution System

The AES DA 2×6, six output, two input AES/EBU distribution system follows in the footsteps of the RDDA 4×4 product and is ideal for distributing AES/EBU signals at sample rates of up to 192kHz and/or word clock around your facility providing transparent AES/EBU signal distribution. The system…

RDL ST-DA3
1X3 Mono Distribution Amplifier

The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the…

Aviom D400-DANTE
A-Net Distributor, with Dante interface

Like the D800 family of A-Net Distributors, the D400 and D400-Dante provide robust, reliable connectivity, delivering power and audio to your Aviom Personal Mixers—at an unbeatable price. The D400 and D400-Dante A-Net Distributors provide the link between the personal mixing system's inputs and the…

JK Audio RemoteAmp Two
Stereo Headphone Amplifier

JK Audio combines professional audio electronics in a rugged new belt pack design.RemoteAmp Two provides a listen only connection for mono IFB or full bandwidth stereo music listening. Separate volume controls for the XLR and 3.5 mm line input jacks allow a simple mix of mono and stereo sources.…

ESE ES217
1 x 4 Audio DA

The ES-217 & ES-218 (1x4) and the ES-245 & ES-246 (Quad 1x6) are Audio Distribution Amplifiers that accept a balanced or unbalanced audio signal and produce exact copies of that signal. The outputs are isolated and have recessed Gain controls. These units are the “Audio…

Ashly SRA2075
2 X 40W @ 8 OHM Power Amp

It might speak softly but it carries a big kick! This two-channel stereo power amp is ideal for installations with modest power requirements. Providing 40W per channel at 8 ohms, it fits into 1RU for carefree compact convenience. Designed to drive 4- and 8-ohm loads, it features outstanding sound…

RDL ST-IC1
Intercom Amplifier

The ST-IC1 is the ideal choice where an intercom system is to be installed, or where an amplifier is needed to bring a mic level up to a 1 W speaker level with optional muting capability.The ST-IC1 has one input, one output and two muting control terminals.The input accepts a dynamic mic, a…

Behringer NX3000
Ultra-Lightweight 3000 Watt Amplifier

The NX3000 power amplifier packs 3000 Watts (2 x 1500 Watts @ 2 Ohms; 2 x 900 Watts @ 4 Ohms; 3000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.7 lbs / 3.5 kg) and rack-mountable packages. And because the NX3000 is so much more efficient than conventional designs, it runs cooler…

ATI MLA800-1
8 CH Line Amplifier – Transformer Balanced Outputs

Multiple Amplifier Arrays provide you with either four or eight identical Line or Microphone Amplifier channels depending on the model selected. These channels may be used as individual independent and isolated amplifiers or they may be combined at internal summing points brought out to the rear…

QSC RMX1450A
2RU 2-Ch 400 W @ 4 ohms Power Amp

The RMXa Series amplifiers from QSC offer true professional-quality performance at an affordable price. Three 2-rackspace models range in power from 430 to 1200 watts per channel at 2 ohms. Two 3-rackspace models provide 2000 to 2500 watts per channel at 2 ohms. All five models feature a compact…

Rane HA6S
Headphone Amplifier

The RANE HA6S is a universal, multi-purpose mixer and headphone amplifier for rehearsal, studio or stage. Perfect for headphones, in-ear monitors, or personal monitor mixing, HA6S features six independent high-power stereo amplifiers in one compact rack unit that delivers maximum audio quality,…

Crown XLS2502
2CH 775W Power Amplifier

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom…

Rolls RA200
Stereo Power Amplifier

The Rolls RA200 power amplifier features two 100 watt RMS - 4 ohm outputs, a bridging switch, MOSFET drivers in a voltage and current gain circuit, one second power-up delay, and LED power output meters. The unit is housed in a painted steel chassis and includes a special high performance…

Crown XLS1502
Two-channel, 525W Power Amplifier

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom…

ESE ES247E
Quad 1X6 Video DA

The ES-247E provides four independent 1x6 Video DA's in a single rack-mount enclosure. Each DA has loop-thru inputs and six isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain and Equalization controls are provided on the front of the case. Up to 1000 feet of cable may…

ATI ADA-208-XLR
Dual 1x4 Low Noise Analog Distribution Amplifier

The ADA208-XLR give you uncompromised outputs, > 90dB EIN audio performance at a reasonable price, with two inputs, each input driving four individually adjustable, active balanced outputs. Need more outputs? Just parallel inputs for up to 1x16 operation. Drive everything from balanced 600 ohm…

Ashly NX3.02
Power Amplifier 2 x 3,000 Watts at 2 Ohms

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound environments and fixed audio installations anywhere―performance venues, stadiums, arenas, convention centers as well as schools, store fronts, and worship spaces. Available as three separate amplifier series, NX…

Numark GROOVETOOL
Cartridge/Stylus for TTUSB Turntable

Keep it old school with this adjustable headshell mount cartridge. You get great sound and strong tracking along with a replaceable diamond tip stylus.Main Features: • 0.6mm spherical diamond tip • Tracking force: 2.5g to 3.5g • Channel separation: 26dB at 1kHz • Output: 2.4Mv • Headshell not included

Crown XLS2002
2CH 650W Power Amplifier

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom…

QSC PLX2502
450 Watt @ 8 OHM Power Amp

Imagine the power and performance of a Concord in the body of a Lear Jet and you'll get the idea.Designed to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required, the PLX2502 delivers up to 2500 W of power and…

QSC CMX2000VA
3RU 2-Ch 2000 W @ 4 ohms Power Amp

The New CMXa Series is an economical and rugged power amplifier designed to meet the needs of system integrators. It is based uponthe proven, rock-solid, reliable performance found in the award winning RMX Series. The CMXa feature sets are designed for wide-ranging application in facilities such as…