Products, Rolls, Ashly, Cartridges and Styli, Preamps, Amplifiers, Turntables, Broadcast

Rolls RA53B
5 Channel Headphone Amplifier

This five-channel headphone/earphone distribution amplifier offers a variety of input options, giving you four master mix inputs. Four separate mixes can also be monitored using the main inputs and the three Insert jacks on Channels 1, 2, and 3. You also get a JOIN Input/Output 1/4" jack for…

Rolls HA43PRO
4 Channel Headphone Amplifier

Now that scientists have definitively proved that two heads are better than one, just think of the awesome power you can harness with the HA43 Pro headphone amp!This four-channel stereo headphone monitoring device is a no-brainer for any recording studio, listening room, or monitoring station. Each…

Rolls RA163
XLR Distribution Amp 8 CH Mono/4 CH Stero

The Rolls RA163 is an eight channel mono, or four channel stereo distribution amplifier designed for the contractor / install market. The outputs are designed to drive high-level balanced lines in a sound distribution system. The XLR jacks on the rear panel are for input and output, and each output…

Rolls RA62C
6-Channel Headphone Amplifier

The Rolls RA62C headphone/earphone amplifier features 6 stereo channels (both 1/4" and 3.5 mm) with independent output controls that can be used simultaneously. It can put out a vigorous 600 mW per jack. It boasts XLR, 1/4", and RCA Main Inputs, as well as six stereo insert jacks for separate use…

Rolls RA200
Stereo Power Amplifier

The Rolls RA200 power amplifier features two 100 watt RMS - 4 ohm outputs, a bridging switch, MOSFET drivers in a voltage and current gain circuit, one second power-up delay, and LED power output meters. The unit is housed in a painted steel chassis and includes a special high performance…

Rolls RA102
10-Ch Expandable Headphone Amplifier

The Rolls RA102 is a 10-channel professional headphone amplifier. Designed with volume controls and 1/8" headphone outputs on the front of the unit, along with 1/4" headphone outputs on the back of the RA102 for each channel, the RA102 has the connections for any professional application. Its join…

Rolls PA202
Stereo 20w Class D Amplifier

The Rolls PA202 is a compact class D amplifier offering 20 watts per channel stereo and 40 watts when in bridge/mono mode. The class D low heat design gives the PA202 the ability to be mounted in very tight applications. It will work great in ceilings by projectors, or anywhere small and heat-free…

Ashly SRA2075
2 X 40W @ 8 OHM Power Amp

It might speak softly but it carries a big kick! This two-channel stereo power amp is ideal for installations with modest power requirements. Providing 40W per channel at 8 ohms, it fits into 1RU for carefree compact convenience. Designed to drive 4- and 8-ohm loads, it features outstanding sound…

Rolls RA235
Power Amplifier 35 Watts/Channel

The Rolls RA235 offers convenient, reliable studio monitoring amplification in a single rack space! It features 35 watts of power per channel into 8 ohms; convenient spring-loaded output terminals; front panel heat sinking for proper venting; protected output stage; 1/4" and RCA inputs.Features:…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

Ashly NE8250
Network Power Amplifier 8 x 250W at 4 Ohms

Connecting and controlling an amplifier for networked systems has now been simplified with Network-Enabled Amplifiers. This line offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed. Choose either…

Rolls MA2152
Stereo 100 Watt Mixer/Amplifier 2U

The Rolls MA2152 is a two rackspace mixer/amplifier designed for restaurants, schools, churches, clubs, etc. The unit provides a compact and efficient way to mix up to three sources such as AM/FM tuners, CD players, and video players with up to two microphones. Priority talkover is provided on…

Ashly PEMA4125
Network Power Amp 4 x 125W at 4 Ohms and 25V Constant Voltage with 8x8 Protea DSP

In many system installations, you can replace an entire rack of pro audio gear—with a single Pema™. Pema™ with it’s new sleek look, is a Protea-Equipped Media Amplifier—either 4 or 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out…

Ashly PEMA8250
Network Power Amp 8 x 250W at 4 Ohms with 8x8 Protea DSP

In many system installations, you can replace an entire rack of pro audio gear—with a single Pema™. Pema™ with it’s new sleek look, is a Protea-Equipped Media Amplifier—either 4 or 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out…

Ashly PEMA8125
Network Power Amp 8 x 125W at 4 Ohms and 25V Constant Voltage with 8x8 Protea DSP

In many system installations, you can replace an entire rack of pro audio gear—with a single Pema™. Pema™ with it’s new sleek look, is a Protea-Equipped Media Amplifier—either 4 or 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out…

Ashly SRA4075
4 X 40W @ 8 OHM Power Amp

There are places where a whisper works better than a yell, and this amplifier will fill them. Actually, it does a lot more than whisper, but this four-channel stereo power amp is ideal for installations with modest power requirements. Providing 40W per channel at 8 ohms, it fits into 1RU for…

Ashly NE4250
Network Power Amplifier 4 x 250W at 4 Ohms

Connecting and controlling an amplifier for networked systems has now been simplified with Network-Enabled Amplifiers. This line offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed. Choose either…

Ashly NX752
Power Amplifier 2 x 75 Watts at 2 Ohms

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. Available in three amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE…

Ashly NX754
Power Amplifier 4 x 75 Watts at 2 Ohms

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. Available in three amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE…

Ashly NX3.04
Power Amplifier 4 x 3,000 Watts at 2 Ohms

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound environments and fixed audio installations anywhere―performance venues, stadiums, arenas, convention centers as well as schools, store fronts, and worship spaces. Available as three separate amplifier series, NX…

Ashly SRA2150
2 X 80W @ 8 OHM Power Amp

Keep the volume (and your budget) right where it needs to be with this high-efficiency amplifier.This two-channel stereo power amp is ideal for installations with modest power requirements. Providing 80W per channel at 8 ohms, it fits into 1RU for carefree compact convenience. Designed to drive 4-…

Ashly PEMA4250
Network Power Amp 4 x 250W at 4 Ohms with 8x8 Protea DSP

In many system installations, you can replace an entire rack of pro audio gear—with a single Pema™. Pema™ with it’s new sleek look, is a Protea-Equipped Media Amplifier—either 4 or 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out…

Ashly NX8004
Power Amplifier 4 x 800 Watts at 2 Ohms

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound environments and fixed audio installations anywhere―performance venues, stadiums, arenas, convention centers as well as schools, store fronts, and worship spaces. Available as three separate amplifier series, NX…

Ashly NX3.02
Power Amplifier 2 x 3,000 Watts at 2 Ohms

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound environments and fixed audio installations anywhere―performance venues, stadiums, arenas, convention centers as well as schools, store fronts, and worship spaces. Available as three separate amplifier series, NX…

Ashly NX1.52
Power Amplifier 2 x 1,500 Watts at 2 Ohms

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound environments and fixed audio installations anywhere―performance venues, stadiums, arenas, convention centers as well as schools, store fronts, and worship spaces. Available as three separate amplifier series, NX…