Products, Broadcast Tools, Preamps, Interfaces and Routers, Cable - Audio Bulk, Turntables, Broadcast

Broadcast Tools ACS8.2Plus
8X2 Stereo Audio Control, Euroblock Connectors

The ACS 8.2 Plus cleanly provides matrix audio switching of 8 stereo inputs to 2 stereo plus 2 mono outputs. You can assign any or all inputs to any or all outputs, with any input assigned to output one having fading capabilities. It features multiple Euroblock connectors for all audio connections,…

Broadcast Tools Audio Sentinel Web Plus
Web-Enabled Two Channel Stereo Silence Monitor

The Audio Sentinel®Plus>>Web is a web-enabled two channel stereo silence monitor combined with a transparent, integrated stereo audio switcher. Audio Sentinel®Plus>>Web is designed to monitor two balanced or unbalanced independent stereo analog audio sources, one primary, the other…

Broadcast Tools MIX-4
4CH Stereo Audio Utility Mixer

The Broadcast Tools Mix-4 is a four channel stereo audio utility mixer ideally suited for the typical broadcast studio or any similar applications. It features four stereo line level high Z mixing inputs, which accept balanced or unbalanced stereo sources. Each input is equipped with a high quality…

Broadcast Tools SS 4.4
4x4 Active Stereo Matrix Switcher

The SS 4.4 provides matrix audio switching of four stereo inputs to 4 stereo outputs. Matrix switching allows any/or all inputs to be assigned to any/or all outputs. The SS 4.4 may be controlled via front panel switches, contact closures and/or the multi-drop RS-232 serial port. Additional features…

Broadcast Tools COA-9X DS MAX
Connect-O-Adapter 9 ABC XDS; WWI IDC MAX StarGuide II/III Analog and AES Audio

Need to convert the DB-9 connector to the euroblock removable screw terminals? The Connect O' Adapter 9 XDS/MAX will do the job. The COA-9 XDS/MAX is designed to plug into the male 9-pin D-Sub connector on the ABC/XDS, WW1 IDC "MAX" or StarGuide II / III.

Broadcast Tools SS8.1MLR
8X1 Stereo Routing Switcher

The SS 8.1 MLR is a transparent eight input, single output switcher/router with mechanical latching relays. The SS 8.1 MLR is perfect for all types of passive signal switching controlled via front panel switches, contact closures and/or multi-drop RS-232 serial. Switching is accomplished with…

Broadcast Tools COA-37XDS
Connect O Adapter, ABC XDS Starguide II/III

Here's another problem solver from Broadcast Tools for the ABC XDS or StarGuide II/III satellite receiver! The Connect O' Adapter 37 XDS provides an effective way to convert the male DB-37 connector to the euroblock removable screw terminals.

Broadcast Tools SS4.1-MLR
4 inputsingle output switcher/router

The SS 4.1 MLR is a transparent four input, one output switcher/router with mechanical latching relays. The SS 4.1 MLR is perfect for all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is accomplished with mechanical latching gold…

Broadcast Tools SS2.1MLR-TERM
Audio Switcher / Router with Terminal Connectors

The SS 2.1 MLR/Term is a transparent two input, dual output switcher/router with mechanical latching relays and Terminal connectors. The SS 2.1 MLR/Term is perfect for all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is…

Broadcast Tools STAIII-PLUS
Smart Telephone Autocoupler Plus

The STA-III Plus provides a convenient interface between a telephone line and the user’s equipment. Features include auto-answer after a user programmed number of rings, user programmed numeric DTMF access code and relay and audio in/out control via numeric DTMF commands.Main Features:• Auto-answer…

Broadcast Tools ACS 16.2
16x2 Stereo Audio Matrix Switcher

The Broadcast Tools ACS 16.2 provides matrix audio switching of 16 stereo inputs to two stereo outputs. Matrix switching allows any/or all inputs to be assigned to any/or all outputs with inputs one and two having fade and dim capabilities. The ACS 16.2 may be controlled via front panel channel…

Broadcast Tools SS2.1MLRBNC
Audio Switcher with BNC Connectors

The Broadcast Tools SS 2.1 MLR/BNC is a transparent, two input, dual output switcher/router with mechanical latching relays and BNC connectors that excels at all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is accomplished with…

Broadcast Tools SS 16.4
16 Stereo in 4 Stereo Out Switcher

The Broadcast Tools SS 16.4 provides matrix audio switching of 16 stereo inputs to 4 stereo plus 4 monaural outputs. Matrix switching allows any or all inputs to be assigned to any or all outputs. The SS 16.4 may be controlled via front panel switches, contact closures, 5-volt TTL/CMOS logic and/or…

Broadcast Tools SMARTRELAY4
Smart Relay 4 for Converting Closures to a Pulse (SR-4)

The Broadcast Tools Smart Relay 4 is the perfect tool for converting sustained network closures to a pulse, providing four independent DPDT relays and eight optically isolated 5 to 24 vdc wet or dry inputs along with 15 logic functions.User programmable logic and pulse stretching (delays) may be…

Broadcast Tools RA-1
Rack Mount Shelf

The Broadcast Tools RA-1 (1-RU rack shelf) provides mounting for three tri-rack or two half-rack "Rack-Able" configured products. The RA-1 is pre-drilled for flush and recessed product mounting. The RA-1 is furnished with filler panels and mounting hardware.

Broadcast Tools ACS4.1
4+1 Stereo Matrix Switcher

The Broadcast Tools ACS 4.1 provides matrix audio switching of 4 stereo inputs to one stereo output. Matrix switching allows any/or all inputs to be assigned to one output. The ACS 4.1 may be controlled via front panel switches, contact closures, logic and/or the multi-drop RS-232 serial port…

Broadcast Tools PROMIX Hub-6
Mix/Switch/Distribution Interface For PROMIX Series Mixers

The ProMix Hub 6 facilitates the switching, mixing and distribution of program, IFB (cue) and talkback audio for any combination of up to six ProMix-1 or ProMix 4 units using Cat5 cable. Talkback utilizes a common party-line signaling protocol for easy configuration and operation. Users can mix and…

Broadcast Tools COA-15 MAX
Connect-O- Adapter15 WWI IDC MAX, StarGuide

Need to convert the DB-15 connector to the euroblock removable screw terminals? The Connect O' Adapter 15 MAX will do the job. The COA-15 MAX is designed to plug into the male 15-pin D-Sub connector on the WW1 IDC "MAX" or StarGuide II/III.

Broadcast Tools GPI-16-PLUS
16 GPI Inputs to Serial/USB Port

The GPI-16 Plus interfaces 16 general purpose logic inputs to users PC COM or USB port. The user may select from two pre-programmed serial formats; the “PIP” GPI format which is used on most of our audio switchers, or the legacy AT-1616 format. Additional features include; Plug-in…

Broadcast Tools IO Sentinel 4
Web-based 4 Input/4 Relay Remote Control Interface with email, and logging

The I/O Sentinel 4 is a robust, full-featured; Ethernet based data acquisition device with four optically-isolated status (logic) inputs and four programmable SPST relays. The I/O Sentinel 4 was designed so all of the basic functionality you need is included to monitor and control your site…

Broadcast Tools DTD-16 PLUS
DTMF Tone/Sequencer Decoder

The DTD-16 Plus is a full-featured DTMF tone/sequence decoder that is user programmable to decode single tones or sequences up to six tones in length and maybe assigned to any one of eight SPST normally open relays, eight open collectors and/or the USB serial port. The relays and open collectors…

Broadcast Tools RM-1
Rack Mount for Two 1/2 Rack Units 8" Deep

Rack mount kit for two Broadcast Tools 1/2-rack units, 8" deep.*Rackmount only. Product units not included.

Broadcast Tools Flex Panel
Filler Panel For RA-1 Rack Mount

The Flex-Panel is an innovative solution that lets you configure a filler panel to the required width when used with the RA-1 Rack Shelf.

Broadcast Tools RM-3 Rack Shelf
Rack Shelf Two Unit- 19"

RM-3 allows mounting of one or two small profile type BTI products horizontally in one rack space. The blue rack shelf is flanged for strength and is equipped with eight 6-32 stand-offs. The front panel is pre-drilled with six 1/4" holes that may be used for ventilation, or to mount user-provided…

Broadcast Tools DTE-16 PLUS
Tiny Tools DTMF Tone/Sequencer-Encoder

The DTE-16 Plus is a feature rich DTMF tone/sequence encoder that is user programmable to encode tone sequences up to 15 characters in length or a single tone via any one of 16 contact closure inputs and/or commands from the USB COM port. Each input may be programmed to generate a tone for the…