Products, Connectors, Rigid Line and Accessories, Preamps, Audio Cables and Connectors, Cable - RF and Accessories, Turntables, Broadcast

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Myat 301-004-XXX
Line Assembly Flanged (per inch)

Unflanged line assembly of customer specified length, 20' typical, 3 1/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 2.5 lbs per foot. Specify length in inches.

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Myat 301-023
90 Degree Elbow Flanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Neutrik NC3FXXPK
Package of 10 - XLR Female Connector, Nickel Shell

The Neutrik XX Series of XLR cable connectors builds upon the popular X Series by offering several new features for even greater reliability, easier assembly, even better contact integrity and improved cable strain relief.Package of ten 3-pole female cable connectors with nickel housing and silver…

Neutrik NC3MXXPK
Package of 10 - XLR Male Connector, Nickel Shell

The Neutrik XX Series of XLR cable connectors builds upon the popular X Series by offering several new features for even greater reliability, easier assembly, even better contact integrity and improved cable strain relief.Package of ten 3-pole male cable connectors with nickel housing and silver…

Myat 201-014
Flange Adaptor

Flange adapter, clamp-type, 1 5/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 1.25 lbs.

ERI STD350-31
3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

Myat 301-050
3-1/8" Gas Block Adaptor

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 201-025
* Elbow, 1 5/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 1 5/8" 50 ohm. Approx. Wt. 15 oz.

Myat 301-025
* Elbow, 3 1/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 3 1/8" 50 ohm. Approx. Wt. 3.25 lbs.

Myat 201-021
* Elbow, 1 5/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 1 5/8" 50 ohm. Includes anchor insulator connector, "O" ring, and hardware kit. Approx. Wt. 3.3 lbs.

Myat 301-014
* Flange Adapter, 3 1/8" Clamp Type for Indoor Use

Flange adapter, clamp-type, 3 1/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 2.65 lbs.

Neutrik NP3XPK
Package of 10 - 1/4" TRS Plug, Nickel

The Neutrik NP3X is a heavy-duty professional phone plug offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise…

Myat 301-021
* Elbow, 3 1/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 3 1/8" 50 ohm. Includes anchor insulator connector with anti-splitting device, "O" ring, and hardware kit. Approx. Wt. 8.8 lbs.

Neutrik NJ3FC6
1/4" TRS Jack, Cable Mt

*1/4" TRS JACK, CABLE MT

Neutrik NC3MXXBPK
Pack of 10-XLRM Connector, Black Shell, Gold Pins

The Neutrik XX Series of XLR cable connectors builds upon the popular X Series by offering several new features for even greater reliability, easier assembly, even better contact integrity and improved cable strain relief.Package of ten 3-pole male cable connectors with black metal housing and gold…

Switchcraft A3MPK
Pack of 10 - XLR Male Connector

10-pack of XLR male connectors with vice strain relief.

Neutrik NC3FXXBPK
Pack of 10--XLRF Conn Black Shell, Gold Contacts

The Neutrik XX Series of XLR cable connectors builds upon the popular X Series by offering several new features for even greater reliability, easier assembly, even better contact integrity and improved cable strain relief.Package of ten 3-pole female cable connectors with black metal housing and…

Myat 301-004
20 ft. 3-1/8" Rigid Line, Unflanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Switchcraft C3F
Panel Mount, XLR Female

*PANEL MOUNT, XLR FEMALE

Myat 301-001
20-ft. 3-1/8" Rigid Line, Flanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 201-001
* 20' 1 5/8" Rigid Line, Flanged

Flanged line assembly, 1 5/8" 50 ohm, 20' typical. Includes anchor insulator connector, "O" ring, and hardware kit. Approx. Wt. 28 lbs @ 20 feet.

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…