Products, Cartridges and Styli, Converters, Preamps, Stands and Stages, Antennas, Computer Audio, Cable - RF and Accessories, Turntables, Broadcast

Andrew 204989-6
Standard Grounding Kit 4"

Standard Grounding Kit for 4 in corrugated coaxial cable

Andrew RLA100-21
1 5/8'' Hardware Kit

1-5/8-inch hardware kit, includes O-ring, silicone lubricant, nuts, bolts, and lock washers for one flange joint. Formerly Part Number 69225-2.

Andrew 42396A-4
*Hangers, 2 1/4" Standard - Kit Of 10

Butterfly Hanger for 2-1/4 in coaxial cable. BSW carries a complete line of quality Andrew broadcast products - call for details.

Hosa Technology ODL312
Digital Format Converter

This handy box allows simultaneous transfer (dubbing) of two independent channels of digital audio in either or both directions. ODL-312 links AES/EBU (XLR) to optical S/PDIF (Toslink)

Ultimate Support TS80B
Speaker Tripod, Black

The Ultimate TS80B heavy-duty tripod speaker stand adjusts from 3'8"-6'7" and features aluminum and steel construction, and accommodates both 1-3/8" and 1-1/2" sockets. 150 lb. capacity. Priced as each.

Andrew L4-5PNM-RC
*N Male Connector For 5/8"

Type N Male RingFlare™ for 5/8 in LDF4.5-50 cable

Numark GROOVETOOL
Cartridge/Stylus for TTUSB Turntable

Keep it old school with this adjustable headshell mount cartridge. You get great sound and strong tracking along with a replaceable diamond tip stylus.Main Features: • 0.6mm spherical diamond tip • Tracking force: 2.5g to 3.5g • Channel separation: 26dB at 1kHz • Output: 2.4Mv • Headshell not included

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Andrew 204673-4
4" Wall/Roof Feed Plate, 4 Openings

Multiple entrance wall/roof feed-thru plate with (4) 4” (102 mm) openings.Use with the corresponding size rubber cable boots (sold separately). Dimensions Height 241.30 mm | 9.50 in Width 647.70 mm | 25.50 in General…

Myat 201-014
Flange Adaptor

Flange adapter, clamp-type, 1 5/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 1.25 lbs.

Andrew 42396A9
*Standard Hanger Kit For 5/8"

Butterfly Hanger for 5/8 in coaxial cable and elliptical waveguide. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew 241088-4
*Grounding Kit for 1 5/8" Cable

Standard Grounding Kit for 1-5/8 in corrugated coaxial cable

ERI ACX150-10SE
*Elbow, 1 5/8" 90 Degree, Flanged

1-5/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

Andrew 223700-724
*5' Grounding Kit for LDF12

Standard Grounding Kit for 2-1/4 in and 3 in corrugated coaxial cable and elliptical waveguide 28 and 37

Andrew 40417
*Nylon Cable Tie Kit, 50 Pieces

Nylon Cable Tie, 14.5 in

Andrew 24312A
*Hoisting Grip, 1 5/8" Cable

Lace-up Hoisting Grip for 1-5/8 in coaxial cable

Andrew 241088-1
*Grounding Kit, 1/2" Attached 2 Hole Lug

Standard Grounding Kit for 1/2 in corrugated coaxial cable Dimensions Nominal Size 1/2 in Waveguide Size WR42 | WG20 | R220 | WR51 | WG19 | R180 Bonding Conductor Length 609.6 mm | 24 in Cable Jacketing Removal…

Myat 301-001
20-ft. 3-1/8" Rigid Line, Flanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 201-001
* 20' 1 5/8" Rigid Line, Flanged

Flanged line assembly, 1 5/8" 50 ohm, 20' typical. Includes anchor insulator connector, "O" ring, and hardware kit. Approx. Wt. 28 lbs @ 20 feet.

Andrew 204679A-9
3" Cable Entry Boot 4" (102 mm)

Standard cable entry boot for use with 204673 series feed-thru plates. 1 hole in boot.

Ultimate Support MS-100R
Monitor Stand Red - Pair

Essentially a winning combination of the Ultimate Support MS-80 and MS-90, the MS-100R studio reference monitor stand features non-slip, high-density acoustic foam and an angle-adjustable base that lets you fine tune the sweet spot, and offers three internal channels (for audio cable, power cable,…

ERI ACX350-10SE-2
*3-1/8-inch, 50 ohm, 90 Degree Miter Elbow

3-1/8-inch, 50 ohm, 90 degree reinforced miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

ERI STD350-1
3-1/8" Rigid Line, Flanged Both Ends, 20 ft.

ERI has long been the industry leader in Radio Broadcast Systems. Electronics Research offers a complete line of products and services to fulfill your Radio Braodcast Systems needs. From Radio Filters and Combiners to AM and FM Antenna Systems, Electronics Research, Inc. can meet your requirements…

Andrew 31769-5
*Hardware Kit For Hangers, 3/4" Bolts 10 Pieces

Hardware Kit of 10 stainless steel fillister-head bolts,3/8" lockwashers, and nuts for attachment ofhangers to drilled tower members. 3/4" bolts; 10 pieces.

Andrew 31768A
*Standard Angle Adaptor For Cable Hangers, 10 Pcs

These Andrew adaptors are designed for mounting 3/8" to 4" cable hangers to angle tower members and include attachment hardware for standard hangers. 10 pieces.