Products, Cartridges and Styli, Converters, Preamps, Duplicators, Stands and Stages, Antennas, Computer Audio, Cable - RF and Accessories, Turntables, Broadcast

Ultimate Support TS90B
PA Speaker Stand, Telelock, Black - Each

The Ultimate Support TS-90B is a sturdy, lightweight tripod stand that can support speakers up to 150 lbs. It features a patented TeleLock collar that lets one person easily and safely raise and lower heavy speakers. It adjusts in height from 3'8" to 6'7".The TeleLock collar has an internal,…

Andrew 43211A
*Hangers, 1/2" Standard - Kit Of 10

Cable hangers, 1/2" standard - kit of 10. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew 31766A-11
*Hanger, 3" Standard - Kit of 10

Butterfly Hanger for 3 in coaxial cable,kit of 10. Product may differ from photo. BSW carries a complete line of quality Andrew broadcast products - call for details.

Myat 201-025
* Elbow, 1 5/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 1 5/8" 50 ohm. Approx. Wt. 15 oz.

Andrew L2TNM-PL
*N Connector, Male For 3/8" Cable

Type N Male Positive Lock for 3/8 in LDF2-50 cable

Myat 201-014
Flange Adaptor

Flange adapter, clamp-type, 1 5/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 1.25 lbs.

Ultimate JS-TS50-2
PA Speaker Stands (Pair) with Storage Bag

Ultimate Support's Jam Stands JS-TS50-2 package features a pair of sturdy aluminum tripod speaker stands. Each stand can hold up to 110 lbs. and includes 1-1/2" and 1-3/8" adaptors to fit most any type of speaker. The height adjustment collar has a safety pin for extra security. This money saving…

Andrew 245171
Weatherproof Kit, Cold Shrink 7/8"

Andrew 3M™ Cold Shrink™ Kit for 7/8 in to 1/4 in through 1/2 in connections

Gator Frameoworks GFW-SPK-3000SET
Deluxe Aluminum Lift-EEZ Speaker Stand (Set of Two with Bag)

A pair of Frameworks aluminum speaker stands with LiftEEZ piston & a carry bagMain Features: • Deluxe Aluminum Speaker Stand • LiftEEZ Self-Rising Center Tube Piston Helps Lift Speaker For You • Red Safety Trim On Feet (Removable) • 35mm Diameter Inner Tube With 38mm…

Andrew 204679A-9
3" Cable Entry Boot 4" (102 mm)

Standard cable entry boot for use with 204673 series feed-thru plates. 1 hole in boot.

ERI RLA100-11-H
*1-5/8" Vertical Spring Hanger

1-5/8-inch vertical spring hanger, accommodates line expansion and contraction. Use at 50 foot intervals. Mounts to 9/16-inch diameter hole with included 1/2-inch diameter bolt or to angle adapters

Myat 201-010
* Insulator Connector, 1 5/8" Bullet

Anchor insulator connector, 1 5/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 3.5 oz.

Andrew 42396A9
*Standard Hanger Kit For 5/8"

Butterfly Hanger for 5/8 in coaxial cable and elliptical waveguide. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew AL7E78-PS
7/8 in EIA Flange Positive Stop for 1-5/8 in AVA7-50, AL7-50 and LDF7-50a Cable

7/8 in EIA Flange Positive Stop™ for 1-5/8 in AVA7-50, AL7-50 and LDF7-50A coaxial cable General Specifications Interface 7/8 in EIA Flange Body Style Straight Brand HELIAX® Mounting Angle Straight …

Andrew 31670-6
Round Member Adaptor Kit 10 Pieces 6-8"

Andrew round member adapter kit, 10 pieces, 6-8".

Andrew 31031-1
Hoisting Grip 5" Cable

Lace-up Hoisting Grip for 5" coaxial cable

Andrew 31670-5
*Round Member Adapter Kit, 10 Pieces 5-6"

Andrew round member adapter kit, 10 pieces, 5-6"

RME ADI-192-DD
Sample Rate Converter

The RME ADI-192 DD format and sample rate converter features three 8-channel format converters with 24-bit audio resolution. Four XLR AES/EBU inputs and outputs each, and two ADAT and TDIF inputs and outputs allow full 8-Channel operation even at 96 kHz / 24-bit. At 192 kHz, there are eight AES…

ERI ACX050-10SE
90 Degree Elbow Flanged 7/8"

7/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Formerly Part Number: 1060A.

Ultimate Support TS99B
*Tall Telelock Tripod, Black

The Ultimate Support TS-99B is a tall, sturdy, lightweight tripod speaker stand and lighting tree base that can support speakers up to 150 lbs. It features a patented TeleLock collar that lets one person easily and safely raise and lower heavy speakers. It adjusts in height from 5'2" to 9'2".The…

Rolls DB226
Stereo line to balanced mono converter

Small adapter with an all metal chassis. Designed to convert a stereo line level signal to a balanced mono output. The DB226 can also convert a balanced mono input to a mono RCA output. DIN rail bracket also availableMain Features:• Plugable screw terminal for the balanced side • RCA input or…

Andrew L1TNM-PL
*N Connector, Male For 1/4" LDF1-50

Type N Male Positive Lock for 1/4 in LDF1-50 cable

ERI RLA350-NF
*Reducer 50 ohm 3-1/8" to type N Female

Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.

Myat 201-009
*Swivel Flange, 1 5/8" EIA, Solder Or Weld

Swivel flange, 1 5/8", brass. Can be silver brazed or welded. Includes silver braze insert ring. Approx. Wt. 13 oz.

Ultimate Support TS80B
Speaker Tripod, Black

The Ultimate TS80B heavy-duty tripod speaker stand adjusts from 3'8"-6'7" and features aluminum and steel construction, and accommodates both 1-3/8" and 1-1/2" sockets. 150 lb. capacity. Priced as each.