Products, ERI, Myat, Preamps, PA Systems, Cable - RF and Accessories, Turntables, Broadcast

Myat 301-014
* Flange Adapter, 3 1/8" Clamp Type for Indoor Use

Flange adapter, clamp-type, 3 1/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 2.65 lbs.

Myat 301-004
20 ft. 3-1/8" Rigid Line, Unflanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 301-050
3-1/8" Gas Block Adaptor

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 301-023
90 Degree Elbow Flanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 301-021
* Elbow, 3 1/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 3 1/8" 50 ohm. Includes anchor insulator connector with anti-splitting device, "O" ring, and hardware kit. Approx. Wt. 8.8 lbs.

ERI RLA300-11-H
*3-1/8 Vertical Spring Hanger

3-1/8 hinged vertical spring hanger, supports the transmission line, prevents lateral motion, and accommodates differential expansion and contraction. Use at 10 foot intervals. Hinged to open from left or right side to save installation labor. Includes 1/2-inch mounting hardware.

Myat 301-008
Fixed Flange, 3-1/8" EIA, Solder or Weld

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 201-004
* 20' 1 5/8" Rigid Line, Unflanged

Unflanged line assembly of customer specified length, 20' typical, 1 5/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 1.25 lbs per foot. Specify length in inches.

Myat 201-025
* Elbow, 1 5/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 1 5/8" 50 ohm. Approx. Wt. 15 oz.

Myat 201-014
Flange Adaptor

Flange adapter, clamp-type, 1 5/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 1.25 lbs.

ERI RLA100-11-H
*1-5/8" Vertical Spring Hanger

1-5/8-inch vertical spring hanger, accommodates line expansion and contraction. Use at 50 foot intervals. Mounts to 9/16-inch diameter hole with included 1/2-inch diameter bolt or to angle adapters

Myat 201-010
* Insulator Connector, 1 5/8" Bullet

Anchor insulator connector, 1 5/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 3.5 oz.

ERI ACX150-10SE
*Elbow, 1 5/8" 90 Degree, Flanged

1-5/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

ERI ACX050-10SE
90 Degree Elbow Flanged 7/8"

7/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Formerly Part Number: 1060A.

ERI RLA350-NF
*Reducer 50 ohm 3-1/8" to type N Female

Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.

Myat 201-009
*Swivel Flange, 1 5/8" EIA, Solder Or Weld

Swivel flange, 1 5/8", brass. Can be silver brazed or welded. Includes silver braze insert ring. Approx. Wt. 13 oz.

ERI STD150-21
*1-5/8" 50 ohm 20' Line Section

1-5/8-inch, 50 ohm, 20-foot standard line section, unflanged.

Myat 201-021
* Elbow, 1 5/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 1 5/8" 50 ohm. Includes anchor insulator connector, "O" ring, and hardware kit. Approx. Wt. 3.3 lbs.

Myat 301-004-XXX
Line Assembly Flanged (per inch)

Unflanged line assembly of customer specified length, 20' typical, 3 1/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 2.5 lbs per foot. Specify length in inches.

Myat 301-025
* Elbow, 3 1/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 3 1/8" 50 ohm. Approx. Wt. 3.25 lbs.

Myat 201-004-XXX
Line Assembly Flanged (per inch)

*Call BSW for Pricing on per inch!Unflanged line assembly of customer specified length, 20' typical, 1 5/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 1.25 lbs per foot. Specify length in inches.

ERI ACX350-10SE-2
*3-1/8-inch, 50 ohm, 90 Degree Miter Elbow

3-1/8-inch, 50 ohm, 90 degree reinforced miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

Myat 301-010
* Insulator Connector, 3 1/8" Bullet

Anchor insulator connector, 3 1/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 12 oz.

Myat 201-008
*FIXED FLANGE, 1 5/8" EIA , SOLDER OR WELD

Fixed flange, 1 5/8", brass. Can be silver brazed or welded. Includes silver braze insert ring. Approx. Wt. 12 oz.

Myat 201-012
*Hardware Kit, For 1 5/8" Flange, Stainless Steel

Hardware kit for 1 5/8" flange, stainless steel. Approx. Wt. 3.1 oz.