Products, Power Conditioning, RDL, Preamps, Racks and Cases, Cable - RF and Accessories, Turntables, Broadcast

RDL SM-K12
Stick On Mounting Strip

The SMK-12 allows removable surface or edge mounting of RDL Stick-Ons onto a panel with velcro fasteners. Panel attaches to surface with screws or foam adhesive pads.

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

RDL STR-H6A
6 unit rackmount for STICK-ON series

The STR-H6A rack mounts 6 STICK-ON modules. This adapter fits 10.4" racks.

RDL TS-1D
Transient Suppressor

The TS-1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines.PS24AS power supply sold separately.Main Features:• Immunity from Electrostatic Discharge • Immunity from Induced Transient Voltage • Immunity from RF…

RDL FP-RRA
Rack Adaptor For RDL FLAT-PAK

Specially-made RDL rack rail adaptor (looks like a blank front panel with room for up to three Flat-Paks on the back side) for Flat-Pak series audio interfaces.

RDL STR-19B
Racking Kit

Easily mount your RDL Stick-On series audio/electrical units into one 19 rack mount system. Holds 10 stick-ons with velcro attachments and allows for uncomplicated cable harnessing. STR-19B mounts up to 10 Stick-Ons at an angle, allowing for easier adjustments of all Stick-On units.

RDL FP-HRA
rackmount for FLAT-PAK series

The FP-HRA rack mounts FLAT-PAK modules. This adapter fits 10.4" racks.

RDL HR-HRA1
1 unit rackmount for HALF-RACK series

The HR-HRA1 is a 1RU rack chassis for mounting one RDL HALF-RACK product, plate or accessory. HALF-RACK series products drop into the chassis, slide into position and are secured by tightening two or four screws provided with the HALF-RACK product or accessory. This adapter fits 10.4" racks.

RDL STR-19A
Racking System

Easily mount your RDL Stick-On series audio/electrical units into one 19 rack mount system. holds 12 stick-ons with velcro attachments and allows for uncomplicated cable harnessing. STR-19A mounts up to 12 Stick-Ons in compact 19 rack mount.

RDL RC-HPS1
Rack Mount for Desktop Power Supply and TX Module

Mounts one desktop style power supply and one TX module. The RC-HPS1 is compatible with all RDL desktop power supplies and with any desktop power supply with maximum dimensions: 5.8 , 14.7 cm x 3 , 7.6 cm x 1.7 , 4.3 cm This adapter fits 10.4" racks.

RDL RC-HPS3
Rack Mount for 3 Desktop Power Supplies

Mounts up to 3 desktop style power supplies. Wiring may be routed out the sides and rear of the chassis. The RC-HPS3 is compatible with all RDL desktop power supplies and with any desktop power supply with maximum dimensions: 5.8 , 14.7 cm x 3 , 7.6 cm x 1.7 , 4.3 cm This adapter fits 10.4" racks.

RDL TX-HRA3
3 unit rackmount for TX series

The TX-HRA3 rack mounts 3 TX modules. This adapter fits 10.4" racks.

RDL SF-RA1
SysFlex Rack Adapter

The SF-RA1 rack mounts several SysFlex modules in fixed or mobile installations. Modules quickly snap into the SysFlex rack mount and each is firmly secured with a single screw. The racking system segregates network and power wiring from the audio and digital audio connectors.Main Features:• 1 RU…

RDL RU-HRA1
1 unit rackmount for RACK-UP series

The RU-HRA1 rack mounts 1 RACK-UP module or mounting frame for AMS accessories. This adapter fits 10.4" racks.

RDL EZ-HRA3
3 unit rackmount for EZ series

Mounts All EZ A/V Products, Mounts EZ Storage Drawers, Base Plate Slides Out for Easy Product Mounting Occupies One RU in 10.4¨ Rack

RDL HD-HRA1
1 unit rackmount for HD series

Mounts 1 HD series product. Mixer amplifiers may be mounted forward for user control, or may be recessed securely behind a filler panel. This adapter fits 10.4" racks.