Products, Wireless Antennas and Accessories, Preamps, Microphones - Wireless, Duplicators, Turntables, Broadcast

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Lectrosonics ARG25
25' Cable, Mini Coax BNC-BNC

ARG SERIES COAX CABLESCoaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. Belden 9913F is a low loss coaxial cable used for ARG25.ARG25 is a 25 ft. cable with 1.9 db loss per 100 ft. Note: Photo shows the 2 ft model # ARG2.

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

Audio Technica DFIN
Multi-purpose Diversity Fin Antenna for wireless microphones

The Diversity Fin™ Antenna is a multi-purpose antenna from RF Venue. It is designed to be used with wireless microphone systems and other UHF receivers incorporating diversity reception, and comprises orthogonal directional LPDA (log periodic dipole array) and bidirectional dipole elements in order…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

Condre PIRANHA
CD/DVD Disc Destruction System

The Condre Piranha permanently destroys sensitive data stored on CD or DVD R media to ensure that information cannot be read, even by sophisticated forensics platforms. Destroys 15 discs per minute. 100 disc input hopper.

Lectrosonics ALP500
Antenna LPDA, Shark Fin Style

The Lectrosonics ALP500 antenna boasts a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth. With VSWR below 2:1 from 450 to 862 MHz, the broad bandwidth of the ALP500 covers a wide section of the band used for Lectrosonics wireless…

Lectrosonics ARG15
15' Cable, Mini Coax BNC-BNC

ARG SERIES COAX CABLESCoaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. ARG15 is a 15 ft.cable with 2.0 db loss per 100 ft. Note: Photo shows the 2 ft model # ARG2.

Shure HA8089
PWS Helical Antenna 480 MHz - 900 MHz

The Shure HA8089 Helical Antenna is a wideband UHF remote antenna for Shure wireless receivers, PSM transmitters and antenna distribution systems, so it'll work with your Shure system.Already an MVP at the Super Bowl, that media-saturated event where accurate transmission and reception is of prime…

Lectrosonics ARG50
50' Cable, Mini Coax BNC-BNC

ARG SERIES COAX CABLESCoaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. Belden 9913F is a low loss coaxial cable used for ARG50.ARG50 is a 50 ft. cable with 2.8 db loss per 100 ft. Note: Photo shows the 2 ft model # ARG2.

Lectrosonics ARG2
2' Cable, Mini Coax BNC-BNC

ARG SERIES COAX CABLESCoaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. ARG2is a 2 ft. cable with 1.0 db loss per 100 ft.

Lectrosonics ALPKIT
Mounting Kit for ALP, SNA Series

Accessory mounting kit for ALP600 or SNA600 antennas. For details, see page 2 of the PDF under More Product Info link at bottom of page.The ALP600 and SNA600 both include a 50 Ohm BNC connector and a 3/8"-16 stainless steel mounting stud. The mounting stud adapts these antennas for use with the…

Lectrosonics ALP690
Active/passive LPDA antenna with selectable RF gain and filtering

The ALP690 is a high-performance active/passive UHF directional antenna with built-in RF amplifier for use with wireless microphone receivers or base station transmitters. The antenna is powered by DC bias inserted on the coaxial cable. When no bias is applied, the ALP690 automatically switches via…

Shure PA805Z2-RSMA
Passive Directional Antenna (GLX-D)

The PA805Z2-RSMA Passive Directional Antenna both improves reception of transmitter signals and minimizes interference from any 2.4 GHz sources near receivers. A key part of any GLX-D® Advanced Digital Wireless installation, PA805Z2-RSMA works exclusively with GLX-D Advanced. Includes 10' RSMA cable.

Shure UA221-RSMA
Reverse SMA Passive Antenna Splitter

Reverse SMA Passive Antenna Splitter works with GLX-D® Advanced Digital Wireless Systems.Specifications:Frequency Range: • <2:1 Voltage Standing Wave Ratio (VSWR) • 700–2700 MHz • Impedance: 50 Ω • Port-to-port isolation: 20 dB, minimum • Insertion Loss: 0.8 dB (3 dB splitter loss not included)…

Shure UA505
Mounting Bracket, BNC Adapter for Remote Antenna

Mounting Bracket, BNC Adapter for Remote Antenna

Shure UA8-2.4GHZ
Antenna, 1/2 Wave, 45 Deg, 2.4GHz

UA8-2.4GHZ is an antenna for the GLXD Advanced line.