Products, Headphone Accessories, Preamps, Metering, Headphones and Headsets, Turntables, Broadcast

Dorrough 240A2
Vertical, Single Channel Loudness Monitor

Model 240-A2 is a vertical single channel loudness meter designed for standard console mounting (only 1.4 x 5 high). It can also be used for surround sound configuration.

Dorrough 40D
*Dual Rack For 40 Series Meters

Rack mount for two 40-series Dorrough meters. Pictured meters not included.

Dorrough 280-A
Stereo Analog Meter

The Dorrough 280-A is a 2-channel analog loudness meter with a straight-line horizontal display and offering14 dB of headroom. Dimensions are 5" W x 1.5" H x 5" D. Dorrough 280-A Features: • 1 left-and-right XLR connector • 1 power input • 1 remote alarm • 1 mini DIN • 1 peak hold

Dorrough 40C2
*Loudness Meter (40-C)

Dorrough Loudness Meter model 40-C2 displays both the peak and average of the audio signal. The unique metering ballistics accurately present loudness variations on an easy-to-read scale. Dual inputs allow sum and difference metering. Peak Hold functions are standard along with a DB9 connector to…

Dorrough 380D
Loudness Meter

The 380-D is a 2-channel AES/EBU vertically mounted straight-line loudness meter with linear 40 dB scale, designed for direct insertion into the digital data-stream. Featuring simultaneous peak and average level display, over indication, and selectable peak hold, it conforms to all AES 3…

Dorrough 280-D
*Dual Channel AES/EBU Meter

Designed for measuring AES/EBU digital audio, this meter displays both the peak and average, employing the same ballistics as the analog meters. Over Indication and Peak Hold are incorporated. Complies with SMPTE 155 requirements.

ESE ES216P3
Triple Audio Level Indicator 1¾” Rack Mount

The ES-216P family consists of one or more Audio Level Indicators mounted on a rack-mount panel. The ES-216 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features ten LED's (six Green, one Yellow and three Red) that…

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

Hosa Technology HPE325
25' Headphone Ext Cable, 1/4" - 1/4" Straight

25-ft. straight headphone extension cable (1/4" female to 1/4" male).

Hosa Technology HPE325-PKG
25' Headphone Ext Cable, 1/4" - 1/4" Straight - 5 Pack

Save with this economical 5-pack of Hosa HPE-325 cables.The Hosa HPE-325 is designed to extend the reach of hard-wired headphones with a stereo phone plug. It may also be used as a stereo extension cable. Hosa HPE-325 Features: • 25-foot 1/4 inch TRS to 1/4 inch TRS cable • Nickel-plated contacts…

Audioarts UCM-HS1
Under Counter Mount Bracket

Mounting bracket for the HP-1 headphone station. Used to mount *HS-1 under a counter or desk.*HP-1 headphone station not included in purchase.

Broadcast Tools AHR-1 Plus 220V
Active Headphone Remote, used with FlexPhones Master-220V

The Active Headphone Remote AHR1PLUS for the Broadcast Tools Flexphones System contains a stereo amplifier designed to work with any combination of high efficiency headphones with impedances between 24 and 600 ohms. The AHR1PLUS version can be used as an individual headphone listening station with…

Shure HPACC2
Hard Storage Case for SRH1440 / SRH1840

Travel easy with this hard, zippered travel case for Shure SRH1440 and SRH1840 professional open back headphones.

Hosa Technology MHE-310
Headphone Ext 3.5MM - 1/4" 10 FT

Extend your listening area with this convenient 10-ft. straight headphone extension cable (1/8" female to 1/4" male).