Electrovoice 78297PKG
*4 Pack Suspension Cord For 309A
4 Replacement rubber suspension cords for the 309A shock mount for Electro-Voice RE20, RE27N/D and RE320 microphones.
In StockART SLA1
100 Watt Studio Linear Amplifier
The SLA1 Studio Linear Amplifier is a robust yet compact power amplifier and has been designed and engineered to provide clean, quiet power with ultra-low noise and distortion. The SLA1 is rated at 100 watts rms/channel into 8 ohms, and has an input impedance of 22k ohm unbalanced (44k ohm…
In StockART SLA2
200 Watt Studio Linear Amplifier
The latest amplifier from ART doubles the power of their popular 100-watt SLA 1, still in a compact single rackspace unit. The SLA-2 is a studio linear power amp that delivers 200 watts of clean, clear power, and will help reproduce your mixes with near pinpoint accuracy, all inside a single…
Call for availabilityBroadcast Tools 2X10-DA
Distribution Amplifier
The 2 x 10 DA stereo distribution amplifier is equipped with a stereo line level high Z input, which accepts a balanced or unbalanced source with ten active balanced low Z output amplifiers. Each output amplifier may be paired for stereo or each output pair may be summed for monaural operation…
Call For AvailabilityHenry Engineering AES 2X4DA
Zero Delay AES Distribution System
The AES Digital DA 2X4 is a distribution system for digital audio signals. It can accept either an AES or S/PDIF digital audio stream, and create four identical AES outputs. The AES DA is 100% bit-accurate and transparent to the source, adding absolutely no delay or latency to the signal. The AES…
Call For AvailabilityRolls RA53B
5 Channel Headphone Amplifier
This five-channel headphone/earphone distribution amplifier offers a variety of input options, giving you four master mix inputs. Four separate mixes can also be monitored using the main inputs and the three Insert jacks on Channels 1, 2, and 3. You also get a JOIN Input/Output 1/4" jack for…
In StockHenry Engineering TalentPod
Mic & Headphone Controller
With Talent Pods, each announcer can control his own mic and headphones. Need to mix Local and Return audio into headphones? Need a different mix for each announcer? Need to give off-air cues to just the “color guy”? No problem! Talent Pod does it all, without DAs and complicated…
In StockHenry Engineering USDA 2X4
2X4 Distribution/Summing Amplifier
U.S.D.A. (Utility Summing & Distribution Amplifier) is a unique 2x4 mini-DA that can be used to combine or split audio signals for distribution. It can be used as a 1x4 or 2x4 DA in stereo or mono. There are 2 inputs (1 stereo pair) and 4 outputs (2 stereo pairs). Front panel…
Call for availabilityHenry Engineering SportsPod
Mic & Headphone Controller, with Talkback
The Sports Pod is an announcer’s mic/headphone controller and intercom system for use by talent at a remote broadcast. It is ideal for use at sporting events, on-location broadcasts, or in any studio. Sports Pod is similar to Henry Engineering’s Talent Pod, but with three additional features: an…
In StockRolls HA43PRO
4 Channel Headphone Amplifier
Now that scientists have definitively proved that two heads are better than one, just think of the awesome power you can harness with the HA43 Pro headphone amp!This four-channel stereo headphone monitoring device is a no-brainer for any recording studio, listening room, or monitoring station. Each…
In StockBlue Microphones RINGER
Shock Mount for Ball Series Mics
Designed for Blue Microphone's complete line of spherical microphones, The Ringer is a vintage-style suspension mount designed to isolate the microphone body from low-frequency energy when mounted on a mic stand. The Ringer also accommodates virtually any microphone with a standard thread mount.…
Call for availabilitySamson QH4
4-Channel Headphone Amplifier
You've positioned your microphones, set your levels and everyone's ready to record. Now, you need a way for each performer to hear themselves. That's where the Samson QH4 comes in... The QH4 is a 4-channel headphone amplifier designed to distribute your audio to up to four individual headphones,…
Call for availabilityAudio Technica AT8415
Microphone Shock Mount
The Audio Technica AT8415 is a great all purpose shock mount perfect for slim taper microphones. Dramatically reduces handling noise and stand vibrations. A must for noise-free recordings!
Call for availabilityRode SM5
Shock Mount for NTG1, NTG2 (Clamp Mt)
Suspension shockmount (clamp adaptor). The SM5 is a shockmount for high-end video cameras. The SM5 shockmount is designed specifically to fit Panasonic and Sony video cameras with clamp mounts. It features a 4-way rubber suspension with integral 24 mm and 27 mm clampmount adaptor. The SM5…
Call for availabilityPresonus HP4
4 Channel Headphone Amp
The HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package - at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per…
In StockART SLA4
4-channel, 400W Power Amplifier
Offering superb sound quality, the ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.The ART SLA-4 is a true four-channel amplifier in a single…
Call For AvailabilityNeumann EA170MT
Shockmount for TLM170MT, TLM170RMT (Black)
The Neumann EA170 is designed for the TLM170 (R) and M149 Tube microphones. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Black.
Call for availabilityShure A44ASM
Shock Mount for KSM44A
The Shure A44ASM ShureLock elastic shock mount works with the Shure KSM44A condenser microphone to keep unwanted vibrations at bay.
Call for availabilityShure A88SM
Shock Mount for VP88
Shock mount for the Shure VP88 stereo microphone.
Call for availabilityRode SM3-R
Rycote Lyre Camera Shoe Shock Mount
The SM3-R is a suspension shock mount with camera shoe adaptor for mounting various RØDE microphones onto a camera via the standard hot/cold shoe mount. The SM3-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit…
Call For AvailabilityCAD Audio GZM-6
Shockmount for GXL Mics
Elastic suspension shockmount for CAD GXL3000, GXL2400 and GXL2200 studio microphones.
Call For AvailabilityNeumann EA170
Shockmount for TLM 170, TLM 170 R, M 149 Tube or M 150 Tube
The Neumann EA170 is designed for the TLM170 (R) and M149 Tube microphones. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Nickel.
Call for availabilityART HEADAMP4
4 Channel Headphone Amp
Feed your headphones. The ART HeadAmp4 four-channel stereo headphone amplifier offers 1/8" and 1/4" I/O as well as lower noise, lower distortion and more output in a stackable metal case. It lets you easily add additional headphone outputs to any mixer, computer audio interface, workstation, iPod,…
In StockCAD Audio MZM5
Shockmount For M177 and M179
Elastic suspension shockmount for CAD M179.
Call for availabilityRycote 044901
InVision USM - Universal Large Diaphragm Microphone Isolation Mount
The Rycote InVision Universal Microphone Shock Mount provides a discreet, low-profile way to mount practically any microphone with a diameter of 18-55mm. The mount uses Rycote's patented Lyre suspension system, which does not use any runner or elastic components to isolate the mic. Instead, the…
Call for availability