Products, Phantom Power Supplies, Preamps, Studio Lighting, Antennas, Microphone Accessories, Turntables, Broadcast

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

ART PHANTOMIIPRO
Dual Phantom Power Supply

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…

Nicom BKG1P-F
Medium Power Portable Broadband FM Dipole EIA Flange Connector

This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…

IKAN ILED-MS
Micro Spot On-Camera Light

Lightweight and compact enough to fit in a pocket or the palm of your hand, the iLED-MS Micro Spot is great for those quick, run-and-gun shots. The light shines a tight, 30-degree beam that works well for interviews as well as B-roll situations. The 4-watt LED is evenly bright, with solid color…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

IKAN ILED-MA
Micro Flood Light

Lightweight and compact enough to fit in a pocket or the palm of your hand, the iLED-MA Micro Flood shines a wide, 120-degree beam suitable as a fill light for low‐lighting situations. Twenty-one 1.2-watt LEDs produce bright 5600K Daylight, which can be softened using the included magnetic…

Rolls PB23
Phantom Power Supply

PB23 provides 12 or 48 V DC phantom power. PB23 includes AC/DC adaptor.

IKAN ILED144
ILED 144 Bi-color Flood Light

The iLED144 Bi-Color Flood Light is designed and built for professional photographers, videographers and cinematographers who want high quality LED lighting at an affordable price. The Bi-Color 5 1/4” x 3 1/4” LED light delivers field-tested reliability, solid construction, and all the features…

Nicom BKG1P-M
Medium Power Portable Broadband FM Dipole 7-16" DIN Connector

This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…

IKAN IDK4312-V2
Kit with 4 x iLED312-V2

The IDK4312-v2 Kit with 4 x iLED312-v2 is designed and built for imaging professionals who want high quality at an affordable price. The Kit delivers field-tested reliability, solid construction, and all the features required for professional performance. The 4-Point Light Kit features include…

Sennheiser AWM2
Antenna Wallmaount

With the AWM 2, the antennas can be installed in an optimum way and nearly invisible, in case the stationary receiver shall be invisible or needs to be further away. It can be easily mounted on a mobile microphone tripod or permanently installed on a wall.Main Features:• Unobtrusive antenna wall or…

Elation CUE265 CUEPIX Blinder WW2
2x 100W COB lights

The new CUEPIX Blinder WW2™ features (2) long life 100W Warm White 3,200K COB LEDs, a 60° beam angle, RDM (Remote Device Management), individual control of each COB module including manual pan focus, variable and selectable dimming curves, strobe effects, flicker free operation for TV and Film,…

Mackie M48
48v Power Supply

The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance.…

Rolls PB223
2 Mic Phantom Power Box

The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.

IKAN ILED120
ILED120 Daylight Flood LED Light

The iLED120 Daylight Flood LED Light is designed and built for professional photographers, videographers and cinematographers who want high quality LED lighting at an affordable price. The Daylight 3 3/4” x 3 1/3” LED light delivers field-tested reliability, solid construction, and all the features…

IKAN SW-04
Safety Wire

The SW04 is a braded metal safety chain that secures the light when hanging from ceiling or grid. The chain is coated in a plastic liner to keep hands from being snagged. The safety cable design ensures this important accessory is always at hand making it easy to comply with worldwide rigging…

IKAN KCP-703
Stage Clamp W/16Mm Stud

The ikan clamp is a practical, multi-purpose tool. Use it to attach your light equipment to a pipe or 2x4. Convenient and inexpensive, the ikan clamp provides a safe way for you to attach lights in hard to reach locations. And its solid metal construction makes it durable.Main Features:• Practical,…

Elation CUE242 CUEPIX Blinder WW4
4x 100W COB Blind lights

The new CUEPIX Blinder WW4™ features (4) long life 100W Warm White 3,200K COB LEDs, a 62° beam angle, RDM (Remote Device Management), individual control of each COB module, manual pan focus, variable and selectable dimming curves, strobe effects, flicker free operation for TV and Film, 3pin and…

Whirlwind MICPOWER2
Portable 48V Phantom Power Supply

The Whirlwind Micpower 2 (MICP2) is a premium stereo phantom power supply. Its regulated 48 Volt DC output is ultra quiet, introducing no noise into the microphone's signal path. The Micpower 2 is conveniently portable, operating on four long lasting AA batteries or on AC when desired, by…

Rolls PB224
* Phantom Power Supply

The PB224 Dual Phantom Power Plus provides phantom power for two condenser microphones. The voltage supply circuits are completely redesigned, offering a rock-solid 48 volts of clean phantom power. The PB224 also now sports a vastly improved molded plastic battery compartment for powering by two 9…

RDL FP-MPA2
Microphone Phantom Adaptor

The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied…