Products, Phantom Power Supplies, Preamps, Test & Service Equipment, Antennas, Microphone Accessories, Turntables, Broadcast

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Galaxy Audio CM140
Checkmate SPL Meter

The Check Mate 140 from Galaxy Audio is a low cost, high performance IEC 651 Type II sound pressure level meter with MAX/MIN function, level range display, AC signal output, and a resolution of 0.1 dB.Features: electret condenser microphone, an accuracy of ±1.5 dB (ref 94dB @1KHz), selectable level…

ART PHANTOMIIPRO
Dual Phantom Power Supply

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…

NTi MR-PRO
Minirator Signal Generator

The MR-PRO is a powerful analog audio generator that gives you a full range of analog test signals, including Sine waveforms, sweep signals, white noise, pink noise and more. With its rotary settings wheel, fast access function keys, a backlit LCD, illuminated mute button, safety hand strap, jack…

Whirlwind TESTER
Cable Tester

The original Whirlwind Tester easily checks for shorts, bad connections, and accommodates XLR, 1/4" and phono plugs. It easily fits in your tool box. 9-volt battery required.

Shure A15TG
Tone Generator - 700 Hz Microphone-Level Signal

The Shure A15TG Tone Generator is a battery-powered 700 Hz signal source that can be used to troubleshoot low-impedance, balanced-line microphone inputs. The A15TG includes a recessed On-Off switch and a three-pin XLR audio connector. A removable end cap allows easy battery installation and…

Whirlwind QBOX
Audio Line Tester

With the Whirlwind Qbox, send a tone or signal over any XLR line. In one battery-powered unit, you have a microphone, a speaker, a test tone generator, outputs for standard headphones, a 1/4 jack for line in and voltage presence LEDs for confirming phantom or intercom power.

RDL ST-NG1
White & Pink Noise Generator

The ST-NG1 is the ideal choice where random white or pink noise is needed. It is suitable either as a reference noise source for audio measurements or as a masking noise source in engineered sound or counter-intelligence applications.Amplitude limiting circuitry in the ST-NG1 controls extreme peak…

NTI MINISPL
Measurement Microphone

The NTI MiniSPL is the ideal accessory for the Acoustilyzer AL1 and Minilyzer ML1, boasting a self-powered design, individual factory adjustment and auto power-off control.Its servo-loop output stage design supports long cable connections between the analyzer and the microphone (up to several…

CAIG F5S-H6
DeoxIT Fader Lube Spray 5 oz.

DeoxIT FaderLube spray contains a precision lubricant designed for use on conductive plastic and carbon compound controls. It is also ideal for use on conductive membrane switches and components.

RDL ST-OSC2A
Osillator, 1 KHZ/10 KHZ

Each of the ST-OSC2 products is a Dual Audio Oscillator. These products are designed for quick, convenient installation, and reliable operation in a variety of audio applications. The ST-OSC2 products feature RDL's SupplyFlex power input configuration. The module will operate directly from floating…

CAIG F100L-L25C
DeoxIT Fader Lube

The DeoxIT FaderLube dropper contains a precision lubricant designed for use on conductive plastic and carbon compound controls. It is also ideal for use on conductive membrane switches and components.

RDL ST-OSC2B
Oscillator 100 HZ/400 HZ

Each of the ST-OSC2 products is a Dual Audio Oscillator. These products are designed for quick, convenient installation, and reliable operation in a variety of audio applications. The ST-OSC2 products feature RDL's SupplyFlex power input configuration. The module will operate directly from floating…

Nicom BKG1P-F
Medium Power Portable Broadband FM Dipole EIA Flange Connector

This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…

Potomac PI4100
Medium Wave Field Strength Meter

New Potomac PI-4100 Medium Wave Field Strength Meter.Trade guesswork for stone cold certainty with the Potomac PI-4100. This precision survey instrument is designed to directly measure electromagnetic field strength in the 520 kHz to 5.1 MHz frequency spectrum. The successor to the industry…

Dorrough RW100
Remote Control For Dorrough Meters

The Dorrough Remote Control RW-100 is now compatible with all models of Dorrough analog and digital meters. RW-100 Remote Control connects with up to four meters providing access to all meter functions. Button legends on the top apply to analog meters and legends on the bottom apply to digital…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

Rolls PB23
Phantom Power Supply

PB23 provides 12 or 48 V DC phantom power. PB23 includes AC/DC adaptor.

Nicom BKG1P-M
Medium Power Portable Broadband FM Dipole 7-16" DIN Connector

This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…

Sennheiser AWM2
Antenna Wallmaount

With the AWM 2, the antennas can be installed in an optimum way and nearly invisible, in case the stationary receiver shall be invisible or needs to be further away. It can be easily mounted on a mobile microphone tripod or permanently installed on a wall.Main Features:• Unobtrusive antenna wall or…

Mackie MTEST-1
Cable Tester

Never play the guessing game with cables again. Featuring a simple 5-way switch to test every pin, even with mismatched connectors, the battery-powered MTEST-1 is an essential tool to have in your bag for every gig. You can even manually test continuity between any two points with the included…

NTI AL1
Handheld Acoustical Analyzer

The NTI Acoustilyzer AL1 is a handheld sound level meter and acoustic analyzer for measuring and monitoring sound pressure levels, room acoustics and speech intelligibility STI-PA. Its blend of electrical and acoustical functions, combined with computer connectivity, makes it an indispensable tool…

Mackie M48
48v Power Supply

The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance.…