Windtech CM21
Video Hot Shoe Mic Clip
The Windtech CM21 "hot shoe" shotgun clip fits most standard video camera hot shoe mounts. A locking nut holds mic clip in place. Adjustable microphone angle with adjustment screw. Fits mics with shaft diameter of 21 mm.The CM21 fits the following shotgun mics: AKG C568, CK61, CK62, CK63, CK68…
Call for availabilityAudio Technica AT8417
Tie Clip, Wire For AT831 And AT803
The Audio Technica AT8417 is the replacement tie & lapel clip for the AT831 and AT803 lapel microphones. It attaches to the mic via a firm wire loop. This clip is a more secure attachment for prolonged or active usage.
Call for availabilityAudio Technica AT8411
Tie Clips for AT831 And AT803
The Audio Technica AT8411 is the replacement clothing clip for the AT831 and AT803 lapel microphones. It attaches to the mic via plastic semicircle clip. This clip is designed for quick attachment and release.
In StockCountryman ECLT
Two-Ear Clip for E6 / E6i Earsets (Tan) Mic on Left Side
The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…
Call for availabilityCountryman ECLB
Two-Ear Clip for E6 / E6i Earsets (Black)Mic on Left Side
The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…
Call for availabilityElectrovoice SAPL-3
Microphone Stand Adaptor For PL37
Fits the Electrovoice PL37 mic like a proverbial charm.
Call for availabilityRDL ST-PH1
Stereo Phono Preamp
The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…
Call for availabilityRycote 037306
Medium Hole Camera Clamp Adapter Mount For Softie
This medium hole (21-22mm) mount features a Camera Clamp Adapter (CCA) thatoffers an effective solution not only to boom pole mounting, but also allows a Softie mount to be attached to a variety of cameras and camcorders via the microphone clamp.
Call for availabilityART USBPHONOPLUSPS
Phono - Line Preamp w/USB
The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…
Call For AvailabilityElectrovoice 320
Stand Clamp For RE20 / RE27ND
Stand clamp for the Electro-Voice RE20, RE27N/D, and N/D 868, black.
In StockART PHANTOMIIPRO
Dual Phantom Power Supply
The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…
Call for availabilityNeumann SGE100
Swivel Mount For AK Capsules
Swivel mount for active capsules of the KM100 system. A rubber shock mount suppresses structure-borne noise. The swivel mount has an M6 thread (6mm).
Call for availabilityNeumann DS120
Stereo Bar Mount For Standard Mic Clips
This stereo mount has a 150mm long support bar with two movable 1/2" threaded studs. Two microphones in their mounts can be attached. Any space or angle between the microphones is freely adjustable. It sports a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.
Call for availabilityWindtech SMC7
Spring Type Mic Clip (Black)
Spring clamp type clip fits a wide variety of mics. Adjustable angle; brass insert with 5/8-27 threads.
Call for availabilityATI MLA400-1
4 CH Line Amplifier Transformer Balanced Outputs
Multiple Amplifier Arrays provides you with four identical Line Amplifier channels. These channels may be used as individual independent and isolated amplifiers or they may be combined at internal summing points brought out to the rear connector to form mixers, summing amplifiers, distribution…
Call For AvailabilitySennheiser AWM2
Antenna Wallmaount
With the AWM 2, the antennas can be installed in an optimum way and nearly invisible, in case the stationary receiver shall be invisible or needs to be further away. It can be easily mounted on a mobile microphone tripod or permanently installed on a wall.Main Features:• Unobtrusive antenna wall or…
Call For AvailabilityRode SB20 Stereo Bar
20cm stereo array spacing bar
The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array. With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RØDE Stereo Bar makes it quick and easy to achieve complex recording arrays. The 5/8”…
Call For AvailabilityART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)
The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…
Call for availabilityPoint Source Audio R-DMC-BE
Reversible Dual Earset Clip
Reversible dual-ear clip adapter for use with PointSource microphones.
Call for availabilityNeumann SG100
Swivel Clamp For KVF Goosenecks To Stand
Swivel mount to attach capsule extensions KVF ... of the variable KM100 miniature microphone system to tripods. It has a 5/8"-27 thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.
Call for availabilityNicom BKG1P-M
Medium Power Portable Broadband FM Dipole 7-16" DIN Connector
This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…
Call For AvailabilityWindtech MC11
Slim Style Mic Clip (Black)
Heavy duty clip for slim mics (.8 to 1 in diameter). Adjustable angle; brass insert with 5/8-27 threads.
In StockWindtech SP-25
Shockmount Mic Clip 25mm (Black)
This ingenious low cost shock mount is exactly what you need to reduce noise when you are doing interviews or have mics set up for live performances. Put one in your gear bag for each of your handheld microphones. Features: vibration-free shockmount for virtually any application; reduces low…
Call for availabilityRolls PB223
2 Mic Phantom Power Box
The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.
Call for availabilitySennheiser MZQ8001
Mini Clip
Handy mini clip for the Sennheiser MKH 8000 series.
Call for availability