Products, Preamps, Phantom Power Supplies, Preamps, Antennas, Microphone Accessories, Turntables, Broadcast

RDL RU-MLA2T
Dual Mic/Line Preamp

The RDL RU-MLA2T is a dual channel audio preamplifier with inputs and outputs that can be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level signal. Each output provides either a microphone or…

RDL STM-1
Mic Preamp

The STM-1 is a low-cost quality microphone preamplifier designed for use in commercial sound and broadcast applications. The compact size makes it ideal where a larger or heavier preamp cannot be used. The high-performance circuit provides a fixed 50 dB gain to bring any mic-level signal up to the…

Rolls PB223
2 Mic Phantom Power Box

The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.

RDL STM-2
Mic Preamp

The STM-2 is a quality low-noise microphone preamplifier designed for use in commercial sound, broadcast, and recording. The STM-2 is very flexible, with gain adjustment from 35 to 65 dB, two balanced or unbalanced outputs, and available phantom supply input. Its ultra-low distortion and lownoise…

RDL STA-2A
High Output Line Amplifier

The STA-2A is a dual-channel, line-level audio preamplifier. Each channel is identical. The audio inputs are bridged at 20 kΩ and accept either an unbalanced or a balanced audio signal. Gain is adjustable from unity to +24 dB using a 25-turn precision audio taper trimming potentiometer. The…

RDL FP-MP1
Flat Rack Mic Preamp

The FP-MP1 is the ideal choice in most applications requiring a preamp. RDL's exclusive low-noise discrete circuitry produces studio quality low noise performance in an economical preamplifier. The XLR and plug-in terminal block connections make the FP-MP1 perfect for both rack-mounted hardwired…

Blue Microphones ROBBIE
Single-Channel Class A Tube Mic Preamp

Like a Corvette, or the Concord Jet, something that looks this cool just has to be a top performer, and the Robbie is for sure. With no ICs and only the highest-quality discrete components from input to output, this is one of the quietest (-131 dB EIN @ 50 ohms) and most detailed (THD 0.006%) tube…

RDL STM-2X
Microphone Preamp

The STM-2X is the ideal choice in many installations where a microphone preamplifier is required, and is the ideal choice where either a toggle-type switch or push-to-talk switch is to be provided for microphone control, particularly if condenser microphones are used.Power Supply Not Included…

RDL STM-3
Mic Preamp

The STM-3 is a quality low-noise microphone preamplifier designed for use in surveillance, commercial sound, broadcast, and recording where higher than normal gain is required. The STM-3 is very flexible, with gain adjustment from 45 to 75 dB, two balanced or unbalanced outputs, and available…

Rolls PB224
* Phantom Power Supply

The PB224 Dual Phantom Power Plus provides phantom power for two condenser microphones. The voltage supply circuits are completely redesigned, offering a rock-solid 48 volts of clean phantom power. The PB224 also now sports a vastly improved molded plastic battery compartment for powering by two 9…

Mackie M48
48v Power Supply

The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance.…

Rolls PB23
Phantom Power Supply

PB23 provides 12 or 48 V DC phantom power. PB23 includes AC/DC adaptor.

Neve 4081KIT
Mounting Kit for 4081

Rackmount kit for the Neve 4081 allows one or two 4081 units to be mounted in a 19" rack enclosure.

RDL FP-MPA2
Microphone Phantom Adaptor

The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied…