Products, Console Prewires, Phantom Power Supplies, Preamps, Metering, Broadcast Consoles, Microphone Accessories, Turntables, Broadcast

Dorrough 240A2
Vertical, Single Channel Loudness Monitor

Model 240-A2 is a vertical single channel loudness meter designed for standard console mounting (only 1.4 x 5 high). It can also be used for surround sound configuration.

Dorrough 40D
*Dual Rack For 40 Series Meters

Rack mount for two 40-series Dorrough meters. Pictured meters not included.

Dorrough 280-A
Stereo Analog Meter

The Dorrough 280-A is a 2-channel analog loudness meter with a straight-line horizontal display and offering14 dB of headroom. Dimensions are 5" W x 1.5" H x 5" D. Dorrough 280-A Features: • 1 left-and-right XLR connector • 1 power input • 1 remote alarm • 1 mini DIN • 1 peak hold

Dorrough 40C2
*Loudness Meter (40-C)

Dorrough Loudness Meter model 40-C2 displays both the peak and average of the audio signal. The unique metering ballistics accurately present loudness variations on an easy-to-read scale. Dual inputs allow sum and difference metering. Peak Hold functions are standard along with a DB9 connector to…

Dorrough 380D
Loudness Meter

The 380-D is a 2-channel AES/EBU vertically mounted straight-line loudness meter with linear 40 dB scale, designed for direct insertion into the digital data-stream. Featuring simultaneous peak and average level display, over indication, and selectable peak hold, it conforms to all AES 3…

Dorrough 280-D
*Dual Channel AES/EBU Meter

Designed for measuring AES/EBU digital audio, this meter displays both the peak and average, employing the same ballistics as the analog meters. Over Indication and Peak Hold are incorporated. Complies with SMPTE 155 requirements.

ESE ES216P3
Triple Audio Level Indicator 1¾” Rack Mount

The ES-216P family consists of one or more Audio Level Indicators mounted on a rack-mount panel. The ES-216 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features ten LED's (six Green, one Yellow and three Red) that…

ART PHANTOMIIPRO
Dual Phantom Power Supply

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

Whirlwind MICPOWER2
Portable 48V Phantom Power Supply

The Whirlwind Micpower 2 (MICP2) is a premium stereo phantom power supply. Its regulated 48 Volt DC output is ultra quiet, introducing no noise into the microphone's signal path. The Micpower 2 is conveniently portable, operating on four long lasting AA batteries or on AC when desired, by…

Rolls PB223
2 Mic Phantom Power Box

The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.

Rolls PB224
* Phantom Power Supply

The PB224 Dual Phantom Power Plus provides phantom power for two condenser microphones. The voltage supply circuits are completely redesigned, offering a rock-solid 48 volts of clean phantom power. The PB224 also now sports a vastly improved molded plastic battery compartment for powering by two 9…

Audioarts R55E12PTA-3
Module Connectors Wired To Unterminated End - Tested 3'

For Audioarts R55E-12 and R55E-1812 console: Prewire kit with module connectors wired to unterminated end and tested, 3 ft. length.

Mackie M48
48v Power Supply

The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance.…

Rolls PB23
Phantom Power Supply

PB23 provides 12 or 48 V DC phantom power. PB23 includes AC/DC adaptor.

Audioarts R55E18PTA-3
3' Prewire For R55E18 Mod Connect To Unterminate

For Audioarts R55E-18 and R55E-1812 console: Prewire kit with module connectors wired to unterminated end and tested, 3 ft. length.

RDL FP-MPA2
Microphone Phantom Adaptor

The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied…

Audioarts R55E8PTA-3
3' Prewire For R55E Mod Connector To Unterminate

For Audioarts R55E console: Prewire kit with module connectors wired to unterminated end and tested, 3 ft. length.