BSW RE320POP - Black
Pop Filter for RE320 Microphone - Black
The BSW RePop 320 is the ultimate pop filter - made specifically for the Electro-Voice RE320 microphone (it also fits the Heil PR40). Fine mesh metal screen diminishes undesirable P-Popping while keeping the integrity of the hi-end frequency response. The RePop clamps easily and securely to the…
In StockBSW RE27POP - Silver
Pop Filter for RE27ND / PR40Microphones - Silver
The BSW Re27Pop is the ultimate pop filter – made specifically for the Electro-Voice RE27 microphone. (It also works well with the Heil PR40).Fine mesh metal screen diminishes undesirable P-Popping while keeping the integrity of the hi-end frequency response. The RePop clamps easily and securely to…
In StockBSW REPOP - Green
Pop Filter for RE20 Microphone - Green
The BSW RePop is the ultimate pop filter - made specifically for the Electro-Voice RE20 microphone. (It also works well with the Heil PR40, but for color matching, see RE27POP). Fine mesh metal screen diminishes undesirable P-Popping while keeping the integrity of the hi-end frequency response. The…
In StockMarshall PF-002
Universal Black Metal Mesh Pop Filter
High quality metal mesh pop filter. Black.
In StockShure PS-6
6" PopperStopper Pop Filter
Shure's PS-6 pop filter is 6" in diameter and has a durable, 4-layer screen that effectively stops 'p' and 'b' sounds. It's mounted on a fully-adjustable 14" gooseneck terminated with a mic stand clamp suitable for any number of applications.
In StockART PHANTOMIIPRO
Dual Phantom Power Supply
The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…
Call for availabilityART USBPHONOPLUSPS
Phono - Line Preamp w/USB
The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…
Call For AvailabilityRDL ST-PH1
Stereo Phono Preamp
The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…
Call for availabilityART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)
The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…
Call for availabilityRoyer PS101
Metal Pop Screen with Gooseneck Attachment
Filter your pops, not your sound.This metal pop filter features special louvered metal that deflects wind downwards while letting sound go directly through. Cleans with soap and water. Screen Diameter: 4.6" (11.7cm). Gooseneck length: 13" (33cm).
Call for availabilityRolls VP29
Stereo Phono Preamp
The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.
Call for availabilityBlue Microphones THEPOP
UniversalMicrophone Pop Filter
The Pop is a universal pof filter/ windscreen that can be used with many microphones. Simply clamp it to the mic stand and position where desired. The sturdy wire mesh and frame ensure years of durability.
Call for availabilityWhirlwind MICPOWER2
Portable 48V Phantom Power Supply
The Whirlwind Micpower 2 (MICP2) is a premium stereo phantom power supply. Its regulated 48 Volt DC output is ultra quiet, introducing no noise into the microphone's signal path. The Micpower 2 is conveniently portable, operating on four long lasting AA batteries or on AC when desired, by…
Call for availabilityShure A42PF
Popper Stopper Magnetic Pop-Filter for KSM42
The Shure A42PF PopperStopper magnetic pop filter works with the Shure KSM42 condenser microphone to attenuate unwanted breath noise and plosives.
Call for availabilityRolls PB223
2 Mic Phantom Power Box
The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.
Call for availabilityRolls PB224
* Phantom Power Supply
The PB224 Dual Phantom Power Plus provides phantom power for two condenser microphones. The voltage supply circuits are completely redesigned, offering a rock-solid 48 volts of clean phantom power. The PB224 also now sports a vastly improved molded plastic battery compartment for powering by two 9…
Call for availabilityAudioarts R55E12PTA-3
Module Connectors Wired To Unterminated End - Tested 3'
For Audioarts R55E-12 and R55E-1812 console: Prewire kit with module connectors wired to unterminated end and tested, 3 ft. length.
Call for availabilityMackie M48
48v Power Supply
The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance.…
Call For AvailabilityRolls PB23
Phantom Power Supply
PB23 provides 12 or 48 V DC phantom power. PB23 includes AC/DC adaptor.
Call for availabilityAudioarts R55E18PTA-3
3' Prewire For R55E18 Mod Connect To Unterminate
For Audioarts R55E-18 and R55E-1812 console: Prewire kit with module connectors wired to unterminated end and tested, 3 ft. length.
Call for availabilityRDL FP-MPA2
Microphone Phantom Adaptor
The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied…
Call for availabilityAudioarts R55E8PTA-3
3' Prewire For R55E Mod Connector To Unterminate
For Audioarts R55E console: Prewire kit with module connectors wired to unterminated end and tested, 3 ft. length.
Call for availability