Products, Phantom Power Supplies, Preamps, Cable - RF and Accessories, Microphone Accessories, Turntables, Broadcast

Myat 201-004
* 20' 1 5/8" Rigid Line, Unflanged

Unflanged line assembly of customer specified length, 20' typical, 1 5/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 1.25 lbs per foot. Specify length in inches.

Andrew RLA350-150
3 1/8" to 1 5/8" Reducer Adapter

Plate reducer, 50 ohm, 3-1/8-inch to 1-5/8-inch includes two inner connectors. 1-5/8-inch bullet is removable and mates with captivated 1-5/8-inch inner connectors. Formerly Part Number 1861.

Andrew 241088-4
*Grounding Kit for 1 5/8" Cable

Standard Grounding Kit for 1-5/8 in corrugated coaxial cable

Andrew 43211A
*Hangers, 1/2" Standard - Kit Of 10

Cable hangers, 1/2" standard - kit of 10. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew 31766A-11
*Hanger, 3" Standard - Kit of 10

Butterfly Hanger for 3 in coaxial cable,kit of 10. Product may differ from photo. BSW carries a complete line of quality Andrew broadcast products - call for details.

Myat 201-025
* Elbow, 1 5/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 1 5/8" 50 ohm. Approx. Wt. 15 oz.

Andrew L2TNM-PL
*N Connector, Male For 3/8" Cable

Type N Male Positive Lock for 3/8 in LDF2-50 cable

Myat 201-014
Flange Adaptor

Flange adapter, clamp-type, 1 5/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 1.25 lbs.

Andrew 245171
Weatherproof Kit, Cold Shrink 7/8"

Andrew 3M™ Cold Shrink™ Kit for 7/8 in to 1/4 in through 1/2 in connections

Andrew 204679A-9
3" Cable Entry Boot 4" (102 mm)

Standard cable entry boot for use with 204673 series feed-thru plates. 1 hole in boot.

ERI RLA100-11-H
*1-5/8" Vertical Spring Hanger

1-5/8-inch vertical spring hanger, accommodates line expansion and contraction. Use at 50 foot intervals. Mounts to 9/16-inch diameter hole with included 1/2-inch diameter bolt or to angle adapters

Myat 201-010
* Insulator Connector, 1 5/8" Bullet

Anchor insulator connector, 1 5/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 3.5 oz.

Andrew 42396A9
*Standard Hanger Kit For 5/8"

Butterfly Hanger for 5/8 in coaxial cable and elliptical waveguide. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew AL7E78-PS
7/8 in EIA Flange Positive Stop for 1-5/8 in AVA7-50, AL7-50 and LDF7-50a Cable

7/8 in EIA Flange Positive Stop™ for 1-5/8 in AVA7-50, AL7-50 and LDF7-50A coaxial cable General Specifications Interface 7/8 in EIA Flange Body Style Straight Brand HELIAX® Mounting Angle Straight …

Andrew 31670-6
Round Member Adaptor Kit 10 Pieces 6-8"

Andrew round member adapter kit, 10 pieces, 6-8".

Andrew 31031-1
Hoisting Grip 5" Cable

Lace-up Hoisting Grip for 5" coaxial cable

Andrew 31670-5
*Round Member Adapter Kit, 10 Pieces 5-6"

Andrew round member adapter kit, 10 pieces, 5-6"

ERI ACX050-10SE
90 Degree Elbow Flanged 7/8"

7/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Formerly Part Number: 1060A.

Andrew L1TNM-PL
*N Connector, Male For 1/4" LDF1-50

Type N Male Positive Lock for 1/4 in LDF1-50 cable

ERI RLA350-NF
*Reducer 50 ohm 3-1/8" to type N Female

Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.

Myat 201-009
*Swivel Flange, 1 5/8" EIA, Solder Or Weld

Swivel flange, 1 5/8", brass. Can be silver brazed or welded. Includes silver braze insert ring. Approx. Wt. 13 oz.

Andrew L2TNF-PL
*N Connector, Female For 3/8" Cable

Type N Female Positive Lock for 3/8 in LDF2-50 cable

Myat 201-021
* Elbow, 1 5/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 1 5/8" 50 ohm. Includes anchor insulator connector, "O" ring, and hardware kit. Approx. Wt. 3.3 lbs.

Myat 301-025
* Elbow, 3 1/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 3 1/8" 50 ohm. Approx. Wt. 3.25 lbs.

Andrew L12PDM
*LDF12 DIN Male Connector

7-16 DIN Male for 2-1/4 in LDF12-50 cable