Myat 201-014
Flange Adaptor
Flange adapter, clamp-type, 1 5/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 1.25 lbs.
Call for availabilityAndrew 245171
Weatherproof Kit, Cold Shrink 7/8"
Andrew 3M™ Cold Shrink™ Kit for 7/8 in to 1/4 in through 1/2 in connections
Call for availabilityAndrew 204679A-9
3" Cable Entry Boot 4" (102 mm)
Standard cable entry boot for use with 204673 series feed-thru plates. 1 hole in boot.
Call for availabilityERI RLA100-11-H
*1-5/8" Vertical Spring Hanger
1-5/8-inch vertical spring hanger, accommodates line expansion and contraction. Use at 50 foot intervals. Mounts to 9/16-inch diameter hole with included 1/2-inch diameter bolt or to angle adapters
Call for availabilityAndrew 42396A9
*Standard Hanger Kit For 5/8"
Butterfly Hanger for 5/8 in coaxial cable and elliptical waveguide. BSW carries a complete line of quality Andrew broadcast products - call for details.
Call for availabilityWindtech MPC10
Multi-Position Mic Clamp (Black)
The Windtech MPC10 allows mics to be mounted just about anywhere. Fits up to 1-1/4 round members or up to 1-1/2 flat surfaces. Mic threads rotate to 3 positions.
Call for availabilityAndrew 31670-6
Round Member Adaptor Kit 10 Pieces 6-8"
Andrew round member adapter kit, 10 pieces, 6-8".
Call for availabilityAndrew 31031-1
Hoisting Grip 5" Cable
Lace-up Hoisting Grip for 5" coaxial cable
Call for availabilityAndrew 31670-5
*Round Member Adapter Kit, 10 Pieces 5-6"
Andrew round member adapter kit, 10 pieces, 5-6"
Call for availabilityWindtech MC9
Deluxe Mic Clip (Black)
Heavy duty clip with rubber insulator. Adjustable angle; brass insert with 5/8-27 threads.
In StockSennheiser MZQ222
Black Dual Post Tie Clip
Black dual-post tie clip for the Sennheiser MKE2, MKE102 and MKE104
Call for availabilityMyat 201-021
* Elbow, 1 5/8" 90 Degree, Flanged
Elbow, 90 degree, swivel flanged, reinforced inside and outside, 1 5/8" 50 ohm. Includes anchor insulator connector, "O" ring, and hardware kit. Approx. Wt. 3.3 lbs.
Call for availabilityMyat 301-025
* Elbow, 3 1/8" 90 Degree, Unflanged
Elbow, 90 degree, unflanged, reinforced inside and outside, 3 1/8" 50 ohm. Approx. Wt. 3.25 lbs.
Call for availabilityAndrew L12PDM
*LDF12 DIN Male Connector
7-16 DIN Male for 2-1/4 in LDF12-50 cable
Call for availabilityAndrew SEC-358
* 5/8" Cable Entry Boot 4" (102 mm)
The Andrew SEC-358 is a SnapSeal entry cushion with 3 holes for 5/8-inch corrugated coaxial cable.
Call for availabilityAndrew 78AS
1 5/8" EIA Male Block
78AS is 1-5/8" EIA male block connector. Photo shows a variety of quality Andrew cable connectors - call for our complete selection.
Call for availabilityERI ACX350-10SE-2
*3-1/8-inch, 50 ohm, 90 Degree Miter Elbow
3-1/8-inch, 50 ohm, 90 degree reinforced miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.
Call for availabilityAndrew 31771-4
*Threaded Rod Support Kit, 12" Length, 5 Pieces
Hardware Kit, includes 3/8 in threaded rod, ceiling mounting plate, nuts and washers
Call for availabilityAndrew 223158-2
*Grounding Kit
Standard Grounding Kit for 1/4 in and 3/8 in corrugated coaxial cable and elliptical waveguide 240 and 380
Call for availabilityAndrew 31766A10
*Hanger, 4" Standard - Kit Of 10
Butterfly Hanger for 4 in coaxial cable,kit of 10. Product may differ from photo. BSW carries a complete line of quality Andrew broadcast products - call for details.
Call for availabilityAndrew 245173
Weatherproof Kit, Cold Shrink 1 5/8"
Andrew 3M™ Cold Shrink™ Kit for 1-5/8 in or 1/4 in to 1/4 in through 1/2 in connections
Call for availabilityMyat 201-008
*FIXED FLANGE, 1 5/8" EIA , SOLDER OR WELD
Fixed flange, 1 5/8", brass. Can be silver brazed or welded. Includes silver braze insert ring. Approx. Wt. 12 oz.
Call for availabilityRolls PB224
* Phantom Power Supply
The PB224 Dual Phantom Power Plus provides phantom power for two condenser microphones. The voltage supply circuits are completely redesigned, offering a rock-solid 48 volts of clean phantom power. The PB224 also now sports a vastly improved molded plastic battery compartment for powering by two 9…
Call for availabilityMyat 201-012
*Hardware Kit, For 1 5/8" Flange, Stainless Steel
Hardware kit for 1 5/8" flange, stainless steel. Approx. Wt. 3.1 oz.
Call for availabilityAndrew 31670-1
*Round Member Adapter Kit, 10 Pieces 1-2"
Andrew round member adapter kit, 10 pieces, 1-2".
Call for availability