Products, Clips, Phantom Power Supplies, Preamps, Cable - RF and Accessories, Microphone Accessories, Turntables, Broadcast

Andrew 204989-6
Standard Grounding Kit 4"

Standard Grounding Kit for 4 in corrugated coaxial cable

ERI STD150-21
*1-5/8" 50 ohm 20' Line Section

1-5/8-inch, 50 ohm, 20-foot standard line section, unflanged.

Rolls PB223
2 Mic Phantom Power Box

The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.

Andrew 224368
*Flair Tool For LDF5

Flare Tool for 7/8 in coaxial cable

Andrew 243095-1
*Hanger, Click-On Hardware Kit, 1/2"-7/8", 3 Stack

Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware

Sennheiser MZQ8001
Mini Clip

Handy mini clip for the Sennheiser MKH 8000 series.

Andrew SEC-412
SnapSeal Entry Cushion with 4 holes for 1/2 inch corrugated coaxial cable

The Andrew SEC-412 is a SnapSeal entry cushion with 4 holes for 1/2-inch corrugated coaxial cable.

Hosa Technology MHR122
Universal Spring Clip Mic Holder

Universal spring-clip mic holder, with brass fittings.

Andrew 241088-2
*Grounding Kit, 5/8" And 7/8" Attached 2 Hole Lug

Standard Grounding Kit for 5/8 in and 7/8 in corrugated coaxial cable

Myat 301-009
Swivel Flange

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Myat 301-004-XXX
Line Assembly Flanged (per inch)

Unflanged line assembly of customer specified length, 20' typical, 3 1/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 2.5 lbs per foot. Specify length in inches.

Myat 301-010
* Insulator Connector, 3 1/8" Bullet

Anchor insulator connector, 3 1/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 12 oz.

Andrew 26985A
Hoisting Grip for 3" Cable

Lace-up Hoisting Grip for 3 in coaxial cable

Myat 301-021
* Elbow, 3 1/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 3 1/8" 50 ohm. Includes anchor insulator connector with anti-splitting device, "O" ring, and hardware kit. Approx. Wt. 8.8 lbs.

Andrew 31769-1
*Hardware Kit For Hangers, 1" Bolts 10 Pieces

Hardware Kit of 10 stainless steel fillister-head bolts,3/8" lockwashers, and nuts for attachment ofhangers to drilled tower members. 1" bolts, 10 pieces.

Audio Technica AT8459
Dual Swivel Mic Clamp

The AT8459 Swivel-mount Microphone Clamp Adapter lets you adjust stand-mounted mics with complete freedom.Features: • Dual swivels provide unlimited number of angles/positions for exact placement of a microphone • Compatible with 5/8"-27 threaded stands • For use with any microphone using a stand clamp

ERI RLA300-11-H
*3-1/8 Vertical Spring Hanger

3-1/8 hinged vertical spring hanger, supports the transmission line, prevents lateral motion, and accommodates differential expansion and contraction. Use at 10 foot intervals. Hinged to open from left or right side to save installation labor. Includes 1/2-inch mounting hardware.

Coax-Seal COAXSEAL
Moisture-Resistant Coax Seal - 60" X 1/2" Roll

Hand-moldable, plastic Coax-Seal seals coax fittings from moisture and corrosion. Made of a plastic material that will quickly and effectively seal all types of coax fittings of all shapes, Coax-Seal stays flexible for years, thus insuring moisture-proof connections and insuring long coax life. It…

Myat 301-008
Fixed Flange, 3-1/8" EIA, Solder or Weld

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

Andrew 223700-724
*5' Grounding Kit for LDF12

Standard Grounding Kit for 2-1/4 in and 3 in corrugated coaxial cable and elliptical waveguide 28 and 37

Shure A26M
Dual Microphone Mount for SM57 and BETA 57A

Dual microphone mount for Shure 545 Series, SM57 and Beta 57A.

Andrew 241088-4
*Grounding Kit for 1 5/8" Cable

Standard Grounding Kit for 1-5/8 in corrugated coaxial cable

Andrew 43211A
*Hangers, 1/2" Standard - Kit Of 10

Cable hangers, 1/2" standard - kit of 10. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew 31766A-11
*Hanger, 3" Standard - Kit of 10

Butterfly Hanger for 3 in coaxial cable,kit of 10. Product may differ from photo. BSW carries a complete line of quality Andrew broadcast products - call for details.

Andrew L2TNM-PL
*N Connector, Male For 3/8" Cable

Type N Male Positive Lock for 3/8 in LDF2-50 cable