Products, Clips, Phantom Power Supplies, Preamps, Antennas, Cable - RF and Accessories, Microphone Accessories, Turntables, Broadcast

Windtech CM21
Video Hot Shoe Mic Clip

The Windtech CM21 "hot shoe" shotgun clip fits most standard video camera hot shoe mounts. A locking nut holds mic clip in place.  Adjustable microphone angle with adjustment screw. Fits mics with shaft diameter of 21 mm.The CM21 fits the following shotgun mics: AKG C568, CK61, CK62, CK63, CK68…

Audio Technica AT8411
Tie Clips for AT831 And AT803

The Audio Technica AT8411 is the replacement clothing clip for the AT831 and AT803 lapel microphones. It attaches to the mic via plastic semicircle clip. This clip is designed for quick attachment and release.

Audio Technica AT8417
Tie Clip, Wire For AT831 And AT803

The Audio Technica AT8417 is the replacement tie & lapel clip for the AT831 and AT803 lapel microphones. It attaches to the mic via a firm wire loop. This clip is a more secure attachment for prolonged or active usage.

Andrew RLA350-150
3 1/8" to 1 5/8" Reducer Adapter

Plate reducer, 50 ohm, 3-1/8-inch to 1-5/8-inch includes two inner connectors. 1-5/8-inch bullet is removable and mates with captivated 1-5/8-inch inner connectors. Formerly Part Number 1861.

Countryman ECLB
Two-Ear Clip for E6 / E6i Earsets (Black)Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Countryman ECLT
Two-Ear Clip for E6 / E6i Earsets (Tan) Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Myat 201-010
* Insulator Connector, 1 5/8" Bullet

Anchor insulator connector, 1 5/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 3.5 oz.

Electrovoice 320
Stand Clamp For RE20 / RE27ND

Stand clamp for the Electro-Voice RE20, RE27N/D, and N/D 868, black.

Nicom BKG1P-M
Medium Power Portable Broadband FM Dipole 7-16" DIN Connector

This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…

Electrovoice SAPL-3
Microphone Stand Adaptor For PL37

Fits the Electrovoice PL37 mic like a proverbial charm.

Audix DFLEX
Dual pivot rim mounted clip w/ extra Butterfly Jaw

Dual pivot rim mounted clip with extra wide butterfly jaws. Attaches firmly to drum rims, congas, mic stands, drum stands or goodie table. Comes stock with DCLIP but can be used with any standard mic clip.

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Andrew LDF4.5-50
5/8" HELIAX® Low Density Foam Coaxial Cable

LDF4.5-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 5/8 in, black PE jacket Construction Materials Jacket Material PE Outer Conductor Material Corrugated copper Dielectric Material Foam PE …

Andrew HJ5-50
7/8" HELIAX® Standard Air Dielectric Coaxial Cable

HJ5-50, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 7/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

Myat 201-025
* Elbow, 1 5/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 1 5/8" 50 ohm. Approx. Wt. 15 oz.

Andrew AL7E158-PS
1/5/8'' EIA Flange Connector For AVA7-50 HELIAX

1-5/8 in EIA Flange for 1-5/8 in AVA7-50, AL7-50 and LDF7-50 cable General Specifications Interface 1-5/8 in EIA Flange Body Style Straight Brand HELIAX® Mounting Angle Straight …

Windtech SMC7
Spring Type Mic Clip (Black)

Spring clamp type clip fits a wide variety of mics. Adjustable angle; brass insert with 5/8-27 threads.

ERI RLA350-NF
*Reducer 50 ohm 3-1/8" to type N Female

Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Andrew LDF4-50A
1/2" Foam Dielectric Cable, Per Foot

LDF4-50A, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/2 in, black PE jacket The Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission cable…

Andrew 224363
*Flair Tool For LDF4

Flare Tool for 1/2 in coaxial cable

Sennheiser AWM2
Antenna Wallmaount

With the AWM 2, the antennas can be installed in an optimum way and nearly invisible, in case the stationary receiver shall be invisible or needs to be further away. It can be easily mounted on a mobile microphone tripod or permanently installed on a wall.Main Features:• Unobtrusive antenna wall or…

Rycote 037306
Medium Hole Camera Clamp Adapter Mount For Softie

This medium hole (21-22mm) mount features a Camera Clamp Adapter (CCA) thatoffers an effective solution not only to boom pole mounting, but also allows a Softie mount to be attached to a variety of cameras and camcorders via the microphone clamp.

ERI ACX150-10SE
*Elbow, 1 5/8" 90 Degree, Flanged

1-5/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

Andrew 31670-2
*Round Member Adapter Kit, 10 Pieces 2-3"

Andrew round member adapter kit, 10 pieces, 2-3".