Products, Hangers and Hoisting Grips, Clips, Phantom Power Supplies, Preamps, Cable - RF and Accessories, Microphone Accessories, Turntables, Broadcast

Windtech CM21
Video Hot Shoe Mic Clip

The Windtech CM21 "hot shoe" shotgun clip fits most standard video camera hot shoe mounts. A locking nut holds mic clip in place.  Adjustable microphone angle with adjustment screw. Fits mics with shaft diameter of 21 mm.The CM21 fits the following shotgun mics: AKG C568, CK61, CK62, CK63, CK68…

Audio Technica AT8411
Tie Clips for AT831 And AT803

The Audio Technica AT8411 is the replacement clothing clip for the AT831 and AT803 lapel microphones. It attaches to the mic via plastic semicircle clip. This clip is designed for quick attachment and release.

Audio Technica AT8417
Tie Clip, Wire For AT831 And AT803

The Audio Technica AT8417 is the replacement tie & lapel clip for the AT831 and AT803 lapel microphones. It attaches to the mic via a firm wire loop. This clip is a more secure attachment for prolonged or active usage.

Countryman ECLB
Two-Ear Clip for E6 / E6i Earsets (Black)Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Countryman ECLT
Two-Ear Clip for E6 / E6i Earsets (Tan) Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Electrovoice 320
Stand Clamp For RE20 / RE27ND

Stand clamp for the Electro-Voice RE20, RE27N/D, and N/D 868, black.

Electrovoice SAPL-3
Microphone Stand Adaptor For PL37

Fits the Electrovoice PL37 mic like a proverbial charm.

Audix DFLEX
Dual pivot rim mounted clip w/ extra Butterfly Jaw

Dual pivot rim mounted clip with extra wide butterfly jaws. Attaches firmly to drum rims, congas, mic stands, drum stands or goodie table. Comes stock with DCLIP but can be used with any standard mic clip.

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Rycote 037306
Medium Hole Camera Clamp Adapter Mount For Softie

This medium hole (21-22mm) mount features a Camera Clamp Adapter (CCA) thatoffers an effective solution not only to boom pole mounting, but also allows a Softie mount to be attached to a variety of cameras and camcorders via the microphone clamp.

Sennheiser MZA421
Mic Clip for MD421

Mic clip for Sennheiser MD421

ART PHANTOMIIPRO
Dual Phantom Power Supply

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…

Windtech MC11
Slim Style Mic Clip (Black)

Heavy duty clip for slim mics (.8 to 1 in diameter). Adjustable angle; brass insert with 5/8-27 threads.

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

Windtech SMC7
Spring Type Mic Clip (Black)

Spring clamp type clip fits a wide variety of mics. Adjustable angle; brass insert with 5/8-27 threads.

Windtech CM57
Video Hot Shoe Adapter

The Windtech CM-57 Hot Shoe Adapter fits most video camera Hot Shoe mounts and allows a mic clip to be securely attached. Two locking knurled nuts hold adapter and mic clip (not included) in place. 5/8-27 thread brass insert, internal female 3/8-16 brass thread.

Windtech SP-25
Shockmount Mic Clip 25mm (Black)

This ingenious low cost shock mount is exactly what you need to reduce noise when you are doing interviews or have mics set up for live performances. Put one in your gear bag for each of your handheld microphones. Features: vibration-free shockmount for virtually any application; reduces low…

Andrew 31768A
*Standard Angle Adaptor For Cable Hangers, 10 Pcs

These Andrew adaptors are designed for mounting 3/8" to 4" cable hangers to angle tower members and include attachment hardware for standard hangers. 10 pieces.

Andrew 31769-5
*Hardware Kit For Hangers, 3/4" Bolts 10 Pieces

Hardware Kit of 10 stainless steel fillister-head bolts,3/8" lockwashers, and nuts for attachment ofhangers to drilled tower members. 3/4" bolts; 10 pieces.

Rode SB20 Stereo Bar
20cm stereo array spacing bar

The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array. With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RØDE Stereo Bar makes it quick and easy to achieve complex recording arrays. The 5/8”…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

Neumann DS120
Stereo Bar Mount For Standard Mic Clips

This stereo mount has a 150mm long support bar with two movable 1/2" threaded studs. Two microphones in their mounts can be attached. Any space or angle between the microphones is freely adjustable. It sports a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.

Point Source Audio B-CLIP
Body Clip for CO-3, 5 & 7 Microphones

The B-Clip is a sturdy and dependable body clip for Point Source CO-Series microphones.

Sennheiser MZQ8000
Standard Mic Clip for MKH 8000 (19mm)

Sturdy mic clip for the Sennheiser MKH 8000 Series.