Products, Microphone Cases, Clips, Phantom Power Supplies, Preamps, Cable - RF and Accessories, Microphone Accessories, Turntables, Broadcast

Windtech CM21
Video Hot Shoe Mic Clip

The Windtech CM21 "hot shoe" shotgun clip fits most standard video camera hot shoe mounts. A locking nut holds mic clip in place.  Adjustable microphone angle with adjustment screw. Fits mics with shaft diameter of 21 mm.The CM21 fits the following shotgun mics: AKG C568, CK61, CK62, CK63, CK68…

Audio Technica AT8411
Tie Clips for AT831 And AT803

The Audio Technica AT8411 is the replacement clothing clip for the AT831 and AT803 lapel microphones. It attaches to the mic via plastic semicircle clip. This clip is designed for quick attachment and release.

Audio Technica AT8417
Tie Clip, Wire For AT831 And AT803

The Audio Technica AT8417 is the replacement tie & lapel clip for the AT831 and AT803 lapel microphones. It attaches to the mic via a firm wire loop. This clip is a more secure attachment for prolonged or active usage.

Andrew RLA350-150
3 1/8" to 1 5/8" Reducer Adapter

Plate reducer, 50 ohm, 3-1/8-inch to 1-5/8-inch includes two inner connectors. 1-5/8-inch bullet is removable and mates with captivated 1-5/8-inch inner connectors. Formerly Part Number 1861.

Gator Cases GM1W
Wireless Mic Bag

The Gator wireless mobile kit is specially designed so your wireless system can be used while the receiver remains in the case. All you do is unzip the front and back and plug-and-play! Includes storage for cables and wireless mic or bodypack.

Myat 201-010
* Insulator Connector, 1 5/8" Bullet

Anchor insulator connector, 1 5/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 3.5 oz.

Countryman ECLT
Two-Ear Clip for E6 / E6i Earsets (Tan) Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Countryman ECLB
Two-Ear Clip for E6 / E6i Earsets (Black)Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Electrovoice SAPL-3
Microphone Stand Adaptor For PL37

Fits the Electrovoice PL37 mic like a proverbial charm.

Electrovoice 320
Stand Clamp For RE20 / RE27ND

Stand clamp for the Electro-Voice RE20, RE27N/D, and N/D 868, black.

Andrew HJ7-50A
1 5/8" HELIAX® Standard Air Dielectric Coaxial Cable

HJ7-50A, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

ART PHANTOMIIPRO
Dual Phantom Power Supply

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…

Andrew A5E78-S
7/8 in EIA for 7/8 in AVA5-50 and AVA5-50FX

7/8in EIA Flange connector General Specifications • Interface 7/8 in EIA Flange • Body Style Straight • Mounting Angle Straight Electrical Specifications • Connector Impedance 50 ohm • Operating Frequency Band 0 – 5000 MHz • Cable Impedance 50 ohm • 3rd Order IMD, typical -116 dBm @ 910 MHz • 3rd…

Windtech MC11
Slim Style Mic Clip (Black)

Heavy duty clip for slim mics (.8 to 1 in diameter). Adjustable angle; brass insert with 5/8-27 threads.

Gator Cases GM1WEVA
EVA Case for One Wireless Microphone

The Gator GM-1WEVA wireless system bag holds most common-sized half-rack wireless units, with storage for receiver, handheld microphone, power supply, belt pack transmitter, and lapel microphones. It features a slim, rigid 5mm EVA rubber foam design with front and rear zippered access for easy…

ERI STD350-31
3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Windtech SMC7
Spring Type Mic Clip (Black)

Spring clamp type clip fits a wide variety of mics. Adjustable angle; brass insert with 5/8-27 threads.

Windtech CM57
Video Hot Shoe Adapter

The Windtech CM-57 Hot Shoe Adapter fits most video camera Hot Shoe mounts and allows a mic clip to be securely attached. Two locking knurled nuts hold adapter and mic clip (not included) in place. 5/8-27 thread brass insert, internal female 3/8-16 brass thread.

Rycote 037306
Medium Hole Camera Clamp Adapter Mount For Softie

This medium hole (21-22mm) mount features a Camera Clamp Adapter (CCA) thatoffers an effective solution not only to boom pole mounting, but also allows a Softie mount to be attached to a variety of cameras and camcorders via the microphone clamp.

Windtech SP-25
Shockmount Mic Clip 25mm (Black)

This ingenious low cost shock mount is exactly what you need to reduce noise when you are doing interviews or have mics set up for live performances. Put one in your gear bag for each of your handheld microphones. Features: vibration-free shockmount for virtually any application; reduces low…

Andrew BN-918710
Bullet Coupling, 3-1/8" EIA W/O-Ring, Connectors

Bullet Coupling, 3-1/8" EIA W/O-Ring, Connectors

Andrew 31768A
*Standard Angle Adaptor For Cable Hangers, 10 Pcs

These Andrew adaptors are designed for mounting 3/8" to 4" cable hangers to angle tower members and include attachment hardware for standard hangers. 10 pieces.