Products, Speaker Mounts, Clips, Phantom Power Supplies, Preamps, Speakers, Microphone Accessories, Turntables, Broadcast

Windtech CM21
Video Hot Shoe Mic Clip

The Windtech CM21 "hot shoe" shotgun clip fits most standard video camera hot shoe mounts. A locking nut holds mic clip in place.  Adjustable microphone angle with adjustment screw. Fits mics with shaft diameter of 21 mm.The CM21 fits the following shotgun mics: AKG C568, CK61, CK62, CK63, CK68…

Audio Technica AT8411
Tie Clips for AT831 And AT803

The Audio Technica AT8411 is the replacement clothing clip for the AT831 and AT803 lapel microphones. It attaches to the mic via plastic semicircle clip. This clip is designed for quick attachment and release.

Countryman ECLT
Two-Ear Clip for E6 / E6i Earsets (Tan) Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Audio Technica AT8417
Tie Clip, Wire For AT831 And AT803

The Audio Technica AT8417 is the replacement tie & lapel clip for the AT831 and AT803 lapel microphones. It attaches to the mic via a firm wire loop. This clip is a more secure attachment for prolonged or active usage.

Countryman ECLB
Two-Ear Clip for E6 / E6i Earsets (Black)Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Electrovoice 320
Stand Clamp For RE20 / RE27ND

Stand clamp for the Electro-Voice RE20, RE27N/D, and N/D 868, black.

JBL MTC-23UB-1
U-Bracket for Control 23-1 Black - Each

The MTC-23UB-1 brackets mount JBL Control Contractor Surface-Mount loudspeaker to walls, decks and ceilings andprovide swiveling capability.

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Electrovoice SAPL-3
Microphone Stand Adaptor For PL37

Fits the Electrovoice PL37 mic like a proverbial charm.

JBL MTC-25UB-1
U-Bracket for Control 28-1 Black - Each

The MTC-xxUB-1 brackets mount JBL Control Contractor Surface-Mount loudspeaker to walls, decks and ceilings andprovide swiveling capability.

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

JBL MTC-23UB-1-WH
U-Bracket for Control 23-1 White - Each

The MTC-23UB-1 brackets mount JBL Control Contractor Surface-Mount loudspeaker to walls, decks and ceilings andprovide swiveling capability.

Rycote 037306
Medium Hole Camera Clamp Adapter Mount For Softie

This medium hole (21-22mm) mount features a Camera Clamp Adapter (CCA) thatoffers an effective solution not only to boom pole mounting, but also allows a Softie mount to be attached to a variety of cameras and camcorders via the microphone clamp.

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

Windtech SMC7
Spring Type Mic Clip (Black)

Spring clamp type clip fits a wide variety of mics. Adjustable angle; brass insert with 5/8-27 threads.

Windtech MC11
Slim Style Mic Clip (Black)

Heavy duty clip for slim mics (.8 to 1 in diameter). Adjustable angle; brass insert with 5/8-27 threads.

Windtech SP-25
Shockmount Mic Clip 25mm (Black)

This ingenious low cost shock mount is exactly what you need to reduce noise when you are doing interviews or have mics set up for live performances. Put one in your gear bag for each of your handheld microphones. Features: vibration-free shockmount for virtually any application; reduces low…

Rolls PB223
2 Mic Phantom Power Box

The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.

Neumann DS120
Stereo Bar Mount For Standard Mic Clips

This stereo mount has a 150mm long support bar with two movable 1/2" threaded studs. Two microphones in their mounts can be attached. Any space or angle between the microphones is freely adjustable. It sports a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.

ART PHANTOMIIPRO
Dual Phantom Power Supply

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…

Rode SB20 Stereo Bar
20cm stereo array spacing bar

The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array. With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RØDE Stereo Bar makes it quick and easy to achieve complex recording arrays. The 5/8”…

Sennheiser MZQ8001
Mini Clip

Handy mini clip for the Sennheiser MKH 8000 series.

Windtech CM57
Video Hot Shoe Adapter

The Windtech CM-57 Hot Shoe Adapter fits most video camera Hot Shoe mounts and allows a mic clip to be securely attached. Two locking knurled nuts hold adapter and mic clip (not included) in place. 5/8-27 thread brass insert, internal female 3/8-16 brass thread.

Hosa Technology MHR122
Universal Spring Clip Mic Holder

Universal spring-clip mic holder, with brass fittings.

Yamaha BMS10A
Mic Stand Adapter

The Yamaha BMS10A adapter mounts loudspeakers of up to 11pounds to a microphone stand. The BMS10A fits the 5/8", 27-thread standard and comes with a 3/8"-16 European thread adapter. The BMS10A comes with two 5mm screwsneeded for mounting. The BMS10A also supports MG10/2, MG8/2FX and the STAGEPAS…