Products, Studio Monitors - Accessories, Clips, Phantom Power Supplies, Preamps, Speakers, Microphone Accessories, Turntables, Broadcast

Presonus Central Station Plus with Remote
Studio Control Center

Get the Central Station bundled with the previously optional CSR1 remote control for extra flexibility AND extra savings! The PreSonus Central Station is the ultimate studio-monitoring interface for the modern digital studio. The Central Station features three sets of stereo analog inputs to switch…

Windtech CM21
Video Hot Shoe Mic Clip

The Windtech CM21 "hot shoe" shotgun clip fits most standard video camera hot shoe mounts. A locking nut holds mic clip in place.  Adjustable microphone angle with adjustment screw. Fits mics with shaft diameter of 21 mm.The CM21 fits the following shotgun mics: AKG C568, CK61, CK62, CK63, CK68…

Audio Technica AT8417
Tie Clip, Wire For AT831 And AT803

The Audio Technica AT8417 is the replacement tie & lapel clip for the AT831 and AT803 lapel microphones. It attaches to the mic via a firm wire loop. This clip is a more secure attachment for prolonged or active usage.

Audio Technica AT8411
Tie Clips for AT831 And AT803

The Audio Technica AT8411 is the replacement clothing clip for the AT831 and AT803 lapel microphones. It attaches to the mic via plastic semicircle clip. This clip is designed for quick attachment and release.

Countryman ECLT
Two-Ear Clip for E6 / E6i Earsets (Tan) Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Countryman ECLB
Two-Ear Clip for E6 / E6i Earsets (Black)Mic on Left Side

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…

Genelec 9310AM
Volume Control for GLM V.20

The volume controller features a 3.5 mm stereo male connector providing easy connectivity to the Genelec GLM 2.0 Network Adapter. The 9310A is available in black colour.

K and M 24471
Speaker Wall Mount, black, 33lbs

Multi-purpose wall mount for speakers. The mounted speaker can be swiveled to the sides and tilted up to 30°. Easy mounting by convenient hooking in and screw locking.Specifications:• Angle of inclination: 0° to 30° • Material: steel • Max. load capacity: 15 kg •…

Electrovoice SAPL-3
Microphone Stand Adaptor For PL37

Fits the Electrovoice PL37 mic like a proverbial charm.

Adam A3XSTANDS
Desktop Stands - Pair

A pair of desktop stands for the ADAM A3X monitor.

Presonus Monitor Station V2
Desktop Studio Control Center - Version 2

Manage multiple audio sources and sets of monitor speakers, track using illegally loud headphone amplifiers, and talk back to your drummer—all from your desktop. Your personal studio is well equipped with a great interface (from PreSonus, of course!) and a CD player with an S/PDIF digital…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

Rycote 037306
Medium Hole Camera Clamp Adapter Mount For Softie

This medium hole (21-22mm) mount features a Camera Clamp Adapter (CCA) thatoffers an effective solution not only to boom pole mounting, but also allows a Softie mount to be attached to a variety of cameras and camcorders via the microphone clamp.

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Electrovoice 320
Stand Clamp For RE20 / RE27ND

Stand clamp for the Electro-Voice RE20, RE27N/D, and N/D 868, black.

Presonus MICROSTATION BT
2.1 Monitor Controller with Bluetooth Connectivity

MicroStation BT is the ultimate solution for anyone who wants to add Bluetooth connectivity to their favorite pair of studio or media reference monitors. A convenient Bluetooth receiver lets you wirelessly stream audio to any pair of studio or media reference monitors right from your phone.…

Mackie Big Knob Studio Plus
4x3 Studio Monitor Controller, 192kHz USB I/O

Mackie Big Knob Studio+ delivers a modernized, smart monitoring control solution based on the bestselling Big Knob, plus integrated USB recording and playback. Professional routing and switching includes a selection of four sources, including USB playback, and a choice between three pairs of…

JBL MTC2P
Wall Mounting Kit For Control 2P, Pair

Wall mounts for the JBL Control 2 P studio monitor.

Neumann SGE100
Swivel Mount For AK Capsules

Swivel mount for active capsules of the KM100 system. A rubber shock mount suppresses structure-borne noise. The swivel mount has an M6 thread (6mm).

Neumann DS120
Stereo Bar Mount For Standard Mic Clips

This stereo mount has a 150mm long support bar with two movable 1/2" threaded studs. Two microphones in their mounts can be attached. Any space or angle between the microphones is freely adjustable. It sports a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.

Windtech SMC7
Spring Type Mic Clip (Black)

Spring clamp type clip fits a wide variety of mics. Adjustable angle; brass insert with 5/8-27 threads.

Adam A5XSTANDS
Desktop Stands - Pair

Pair of desktop stands for ADAM A5X monitor.

Rode SB20 Stereo Bar
20cm stereo array spacing bar

The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array. With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RØDE Stereo Bar makes it quick and easy to achieve complex recording arrays. The 5/8”…

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

JBL RMC
Room Mode Correction Calibration Kit

Room mode calibration kit for JBL LSR series speakers.