Products, Microphone Preamps, Phantom Power Supplies, Preamps, Antennas, Microphone Accessories, Turntables, Broadcast

Sound Devices MM-1
Battery Powered Microphone Pre with Headphone Monitoring

The MM-1 is at home in high-definition television production, corporate/industrial environments, radio/television announce booths, and music production. Its headphone monitor is an advantage in applications where communications channels or mix-minus feeds need to be monitored in headphones. The…

Cloud Microphones Cloudlifter CL-4
4CH Rackmount phantom powered mic activator/pre +25db gain for low output mics

Cloudlifter CL-4 Mic Activator is based on Cloud’s award-winning Cloudlifter technology that converts phantom power into an additional +25 dB of ultra-clean gain for low output dynamic and ribbon mics. Cloudlifters solve problems posed by noisy preamps and can be used to drive stronger, cleaner…

Cloud Microphones Cloudlifter CL-1
Single Channel phantom powered mic activator/pre +25db gain for low output mics

A Must-Have Tool for Dynamics and Ribbons! Cloudlifter CL-1 Mic Activator is an easy to use, compact solution for common audio problems faced in the field and in the studio. Designed for all passive microphones – including ribbons- the CL-1 safely uses any standard phantom powered microphone input…

Cloud Microphones Cloudlifter CL-Z
Single Channel phantom powered mic activator/pre, variable impedance, high pass filter & gain pad

Maximize Your Mic Signal for Stage or Studio! Optimize any dynamic or ribbon microphone in your locker with the Cloud Microphones CL-Z mic activator! The Cloud Microphones CL-Z mic activator uses phantom power from your preamp to solve an array of common issues with dynamic and ribbon microphones…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Tascam SERIES-8P-DYNA
8 CH Microphone Preamp with Compressor

With superb audio specifications and connectivity and featuring an outstanding microphone preamp, the TASCAM SERIES 8p Dyna is a great choice for both studio and stage. Housed in a rugged 1U rack-mount casing, its dual S/MUX optical ports make it a perfect expansion unit for a TASCAM SERIES 102i or…

Cloud Microphones Cloudlifter CL-2
Dual Channel phantom powered mic activator/pre +25db gain for low output mics

A Must-have Tool for Any Rig! Fire up your low-gain mics and long cable runs, with a Cloudlifter CL-2 Mic Activator from Cloud Microphones!Low-gain microphones typically come with high-impact problems that can frustrate engineers. Unfortunately, many low-output microphones, such as the SM7b, the…

Cloudlifter CL1 Broadcast Cable Bundle
Single Channel phantom powered mic activator with BSW-BMC-20 cable

If you needaCloudlifter to boostyour broadcast mic's output, get it bundled with a custom broadcast mic cable! Get a Cloudlifter CL-1 Mic Activator and a BSW-designed, 20-footBSW-BMC-20 mic cable for one special price!A Must-Have Tool for Dynamics and Ribbons! Cloudlifter CL-1 Mic Activator is an…

ATI MLA400-1
4 CH Line Amplifier Transformer Balanced Outputs

Multiple Amplifier Arrays provides you with four identical Line Amplifier channels. These channels may be used as individual independent and isolated amplifiers or they may be combined at internal summing points brought out to the rear connector to form mixers, summing amplifiers, distribution…

Neve 4081
Quad Mic Preamp

The Neve 4081 Quad Mic Preamp builds on the incredible success of the 1081 and 1081R modules and provides both powerful control and legendary Neve sound. Perfect for vocals, ADR and Foley recording, the 4081's features make it the number one choice for any post-production, studio, OB truck or live…

Sennheiser AWM2
Antenna Wallmaount

With the AWM 2, the antennas can be installed in an optimum way and nearly invisible, in case the stationary receiver shall be invisible or needs to be further away. It can be easily mounted on a mobile microphone tripod or permanently installed on a wall.Main Features:• Unobtrusive antenna wall or…

Sound Devices MP-1
Battery powered Single Channel Microphone Pre

Designed for high-definition field production environments, the MP-1 is an ideal studio-quality mic pre for critical radio, television, and film applications. The MP-1 is extremely durable and easy to use. With rugged mechanical and electrical construction and high-quality components, it will…

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Nicom BKG1P-M
Medium Power Portable Broadband FM Dipole 7-16" DIN Connector

This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…

Rolls PB223
2 Mic Phantom Power Box

The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.

ART PHANTOMIIPRO
Dual Phantom Power Supply

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…

RDL HR-MP2
2 Channel Mic Preamp

The HR-MP2 is a dual channel microphone preamplifier with line-level outputs. Each section provides identical rear-panel signal connections and front-panel controls.Each preamplifier is equipped with a front-panel FILTER switch to enable or disable a 6 dB/octave low-cut filter with a -3 dB cutoff…

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

Nicom BKG1P-F
Medium Power Portable Broadband FM Dipole EIA Flange Connector

This broadband dipole antenna is constructed of stainless steel and is designed to last a long time in any weather condition. Because of its sturdy construction, it can support up to 2.5 KW of input power with the appropriate connector. Since it has a wide angle of radiation, it is strongly…

Neve 1073DPD
Stereo Mic Preamp

Perfect for digital recording, the Neve 1073DPD combines two acclaimed Neve 1073 microphone preamps with Neve-designed A/D converters, all in a single rackspace.The Neve 1073DPD is the consummate mic pre for capturing vocals and musical instruments, with the added convenience of direct output to…

Rolls PB224
* Phantom Power Supply

The PB224 Dual Phantom Power Plus provides phantom power for two condenser microphones. The voltage supply circuits are completely redesigned, offering a rock-solid 48 volts of clean phantom power. The PB224 also now sports a vastly improved molded plastic battery compartment for powering by two 9…

Mackie M48
48v Power Supply

The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance.…

Rolls PB23
Phantom Power Supply

PB23 provides 12 or 48 V DC phantom power. PB23 includes AC/DC adaptor.

RDL FP-MPA2
Microphone Phantom Adaptor

The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied…