Dorrough 240A2
Vertical, Single Channel Loudness Monitor
Model 240-A2 is a vertical single channel loudness meter designed for standard console mounting (only 1.4 x 5 high). It can also be used for surround sound configuration.
Call for availabilityDorrough 40D
*Dual Rack For 40 Series Meters
Rack mount for two 40-series Dorrough meters. Pictured meters not included.
Call for availabilityDorrough 280-A
Stereo Analog Meter
The Dorrough 280-A is a 2-channel analog loudness meter with a straight-line horizontal display and offering14 dB of headroom. Dimensions are 5" W x 1.5" H x 5" D. Dorrough 280-A Features: • 1 left-and-right XLR connector • 1 power input • 1 remote alarm • 1 mini DIN • 1 peak hold
Call for availabilityDorrough 40C2
*Loudness Meter (40-C)
Dorrough Loudness Meter model 40-C2 displays both the peak and average of the audio signal. The unique metering ballistics accurately present loudness variations on an easy-to-read scale. Dual inputs allow sum and difference metering. Peak Hold functions are standard along with a DB9 connector to…
Call for availabilityDorrough 380D
Loudness Meter
The 380-D is a 2-channel AES/EBU vertically mounted straight-line loudness meter with linear 40 dB scale, designed for direct insertion into the digital data-stream. Featuring simultaneous peak and average level display, over indication, and selectable peak hold, it conforms to all AES 3…
Call for availabilityDorrough 40A2
*Loudness Meter (40-A)
Dorrough Loudness Meter model 40-A2 displays both the peak and average of the audio signal. The unique metering ballistics accurately present loudness variations on an easy-to-read scale. Dual inputs allow sum and difference metering. Peak Hold functions are standard along with a DB9 connector to…
Call for availabilityDorrough 280-D
*Dual Channel AES/EBU Meter
Designed for measuring AES/EBU digital audio, this meter displays both the peak and average, employing the same ballistics as the analog meters. Over Indication and Peak Hold are incorporated. Complies with SMPTE 155 requirements.
Call for availabilityESE ES216P3
Triple Audio Level Indicator 1¾” Rack Mount
The ES-216P family consists of one or more Audio Level Indicators mounted on a rack-mount panel. The ES-216 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features ten LED's (six Green, one Yellow and three Red) that…
Call for availabilityFocusrite ISA428MKII
4-channel Mic Preamp
The Focusrite ISA428 MkII premium four-channel mic preamp features four of Focusrite's classic ISA preamps, originally developed for the legendary Forté console. Each channel has a variable impedance circuit to let you perfectly match the preamp with any microphone, or to use different settings…
Call for availabilityNeumann V402
Microphone Preamp
The V 402 is Neumann’s newest microphone preamp since the launch of the legendary V 476b in the 1980s, which is still widely used and highly regarded in many professional studios. As technology has since advanced, Neumann has continued the quest to create the top-performing preamp for Neumann and…
Call For AvailabilityFocusrite ISAONE
Single Channel Mic-Pre with Flight Case
ISA One is a single-channel mic preamp boasting classic topology from Focusrite's legendary ISA110 module, with a line input (XLR and TRS) and an independent D.I. channel for blending signals. It also offers dedicated gain control, active or passive impedance switch, a TRS output for routing to an…
Call for availabilityNeve 1073DPA
Stereo Mic Preamp
The Neve 1073DPA features two acclaimed Class A Neve 1073 mic preamps in a single rackspace. The big, punchy sound of the 1073 compliments any musical genre, making it the consummate mic pre for recording vocals, guitars, and acoustic instruments of all descriptions. Two rear-panel Mic inputs and…
Call for availabilityART TUBEMPSTUDIOV3
Tube Mic Preamp with Variable Valve Voicing
The Tube MP Studio V3 single channel mic pre features ART's new V3 (Variable Valve Voicing) Technology, for the ultimate in warm tube preamplification.The V3 presets were created and fine-tuned by some of the industry's top studio and live-sound engineers. And it's not just for vocals - select…
Call for availabilityAvalon Design VT737SP
High Performance Mic Processor
The Avalon VT-737SP is an amazing preamp/channel strip with a combination of tube preamplifiers, opto-compressor, sweep equalizer, output level and VU metering, all in a 2U space. This is the choice processor for many voice-over artists. The VT-737SP has three input selections: 1. The VT-737SP…
Call For AvailabilityRDL ST-PH1
Stereo Phono Preamp
The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…
Call for availabilityART USBPHONOPLUSPS
Phono - Line Preamp w/USB
The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…
Call For AvailabilityRDL RU-MLA2
Dual Mic/Line Audio Pre-amp
The RU-MLA2 is a dual channel audio preamplifier. The inputs and outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level signal. Each output provides either a microphone or line level…
Call for availabilityPresonus TubePre
Mono Tube Preamp
The Presonus TubePre professional mono tube preamp features a dual-servo (no capacitors) gain stage that lets you boost the program signal to extremely high levels without significantly increasing the background noise, while offering rich and warm audio quality. The 12AX7 vacuum-tube-based preamp…
Call for availabilityART PROMPAII
Two Channel Mic Preamp W/Variable Impedance
The new ART ProMPA II is the next generation in affordable high-performance microphone preamp technology. Each microphone input circuit, with selectable 48v phantom power, features variable input impedance which can radically vary the overall performance of any high-quality dynamic or ribbon…
Call for availabilityAvalon Design U5
Mono Preamp, Instrument DI Class A w/EQ
Get the ultimate tone for bass or other DI applications with this high-power preamp from Avalon. The U5 high-voltage DI-preamp combines a unique passive tone selector with a variable gain preamp and filter. The high input impedance accepts a wide variety of signal levels and instruments from…
Call for availabilityART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)
The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…
Call for availabilityRDL RU-MLA2T
Dual Mic/Line Preamp
The RDL RU-MLA2T is a dual channel audio preamplifier with inputs and outputs that can be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level signal. Each output provides either a microphone or…
Call for availabilityStudio Projects VTB-1
Variable Tube Mic Preamp
The VTB-1 mic preamp incorporates true class A/B switching, for a totally discrete circuit. Its unique Tube Drive is a variable drive to a 12AX7 that lets you blend as little, or as much of the Tube Drive you want. Extremely flexible, it enables you to go from a pristine solid-state sound to any…
Call for availabilityRolls PB223
2 Mic Phantom Power Box
The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.
Call for availabilityART TUBEOPTO8
8-Channel Tube PreAmp w/ADAT I/O
The ART TubeOpto 8 is an eight-channel I/O expander for any ADAT lite-pipe equipped audio interface, direct-to-disc recorder or DAW. Eight high quality second generation discrete Class-A vacuum tube microphone preamps are packaged in a single rack space unit with eight channel 24-bit digital…
Call for availability