Products, Shock Mounts, Phantom Power Supplies, Preamps, Microphone Accessories, Turntables, Broadcast

Neumann EA1MT
Shockmount (Black)

The EA 1 spider shockmount is designed for the TLM 103, TLM 127, TLM 102 MT, TLM 193 and M 147 Tube microphones. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Black color.

Rode PSM1
Shock Mount for Podcaster And Procaster Mics

The perfect suspension shock mount for the Procaster or Podcaster, the PSM1 provides isolation from external vibrations which can translate as low frequency noise or manipulate the microphone position. The PSM1 gives you confidence when using your microphone in environments where there is any…

Rolls PB223
2 Mic Phantom Power Box

The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.

Shure A27SM
ShureLock(TM) Rubber Isolated Suspension Shock Mount for KSM27

The Shure A27SM is an elastic suspension shock mount for use with Shure KSM27 microphones, and is designed especially to eliminate from mechanically transmitted noise. The microphone is locked securely into the mount using ShureLock, and the suspension attenuates vibration noise.

ART PHANTOMIIPRO
Dual Phantom Power Supply

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…

Sennheiser MZS421
Shockmount for MD421 II

Shockmount for the Sennheiser MD421ii.

Better Bands BN1
Mounting Stud and Thumb Screw for EV 309A microphone mount

Better Nuts allows you to take the OEM RE20 mount and – get this – securely connects it to your boom! Created stronger and larger so you can stop your microphone from slamming against your board during a break.Main Features: • Made With Steel: Better Nuts are manufactured with steel – not brass…

Audio Technica AT8484
ShockMount for the BP40 Broadcast Microphone

Main Features: • Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts. • Inner shock mount ring rotates to engage ball bearings that lock microphone in place. • Compatible with 5/8"-27 threaded stands. • Designed to be used with the BP40.

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

Shure A55M
Shock Mount for SM58, SM87, SM87A, BETA87A

Shock mount for SM57LC and SM58LC.

Shure A89M-PG
Rycote Pistol Grip Mount

Developed by Shure with Rycote, this adjustable handheld mount works with VP89S and VP89M End-Address Shotgun Condenser Microphones.Patented Lyre technology provides excellent isolation against handling noise. A soft feel grip is molded into the clip to prevent the microphone from twisting or slipping.

On Stage MY410
Studio Mic Shock Mount

This studio microphone shock mount offers vibration-free support. Fitting most large diaphragm condenser microphones (42-48mm diameter) and boasting a die-cast steel adapter with 5/8”-27 threads, it features an angle adjustment with locking knob, and will attach to any microphone boom. The mic…

Sennheiser MKS4
Shockmount for MK4

The MKS-4 shockmount for the Sennheiser MK 4 microphone features an elastic suspension with open ring, allowing the mic to be positioned close to the sound source. Mic not included.

Neumann Z26MT
Inline Shock Mount

The Z26 rubber shock mount is inserted between the stand and the swivel mount to avoid the transmission of structure-borne noise. It has a 1/2" threaded stud and a 5/8"-27 female thread to attach to tripods. Included is a thread adapter for 1/2" and 3/8" studs.

Neumann EA87
Shockmount For U87/U87AI (NICKEL)

The EA87 is designed for the U87Ai microphone. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" studs. Nickel finish.

Rolls PB224
* Phantom Power Supply

The PB224 Dual Phantom Power Plus provides phantom power for two condenser microphones. The voltage supply circuits are completely redesigned, offering a rock-solid 48 volts of clean phantom power. The PB224 also now sports a vastly improved molded plastic battery compartment for powering by two 9…

Mackie M48
48v Power Supply

The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance.…

Samson SP01
Optional Shock Mount for CO1U

Optional shockmount for C01U USB microphone.

Shure A53M
Shock Mount for SM81, SM86, KSM141, KSM137

Shock Stopper isolation mount/swivel adapter reduces transmission of mechanical noise and vibration by more than 20 decibels. Compatible with Shure 849, SM81, SM94, VP64, KSM109, KSM137, KSM141, or any 3/4 inch (1.875 cm) Shure microphone.

Rolls PB23
Phantom Power Supply

PB23 provides 12 or 48 V DC phantom power. PB23 includes AC/DC adaptor.

RDL FP-MPA2
Microphone Phantom Adaptor

The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied…

Whirlwind MICPOWER2
Portable 48V Phantom Power Supply

The Whirlwind Micpower 2 (MICP2) is a premium stereo phantom power supply. Its regulated 48 Volt DC output is ultra quiet, introducing no noise into the microphone's signal path. The Micpower 2 is conveniently portable, operating on four long lasting AA batteries or on AC when desired, by…

Sennheiser MZS20-1
* Shock Mount/Pistol Grip/Stand Adapter

Shock mount with pistol grip for Sennheiser ME66.

Shure A42SM
ShureLock® Shock Mount for KSM42

The Shure A42SM ShureLock rubber suspension shock mount works with the Shure KSM42 condenser microphone to keep unwanted vibrations at bay.