Products, Shock Mounts, Phantom Power Supplies, Preamps, Cable - RF and Accessories, Microphone Accessories, Turntables, Broadcast

Better Bands BN1
Mounting Stud and Thumb Screw for EV 309A microphone mount

Better Nuts allows you to take the OEM RE20 mount and – get this – securely connects it to your boom! Created stronger and larger so you can stop your microphone from slamming against your board during a break.Main Features: • Made With Steel: Better Nuts are manufactured with steel – not brass…

Myat 201-025
* Elbow, 1 5/8" 90 Degree, Unflanged

Elbow, 90 degree, unflanged, reinforced inside and outside, 1 5/8" 50 ohm. Approx. Wt. 15 oz.

Andrew AL7E158-PS
1/5/8'' EIA Flange Connector For AVA7-50 HELIAX

1-5/8 in EIA Flange for 1-5/8 in AVA7-50, AL7-50 and LDF7-50 cable General Specifications Interface 1-5/8 in EIA Flange Body Style Straight Brand HELIAX® Mounting Angle Straight …

ERI STD350-31
3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

Andrew BN-918710
Bullet Coupling, 3-1/8" EIA W/O-Ring, Connectors

Bullet Coupling, 3-1/8" EIA W/O-Ring, Connectors

Rolls VP29
Stereo Phono Preamp

The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.

ERI RLA350-NF
*Reducer 50 ohm 3-1/8" to type N Female

Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

Andrew LDF4-50A
1/2" Foam Dielectric Cable, Per Foot

LDF4-50A, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/2 in, black PE jacket The Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission cable…

Andrew 224363
*Flair Tool For LDF4

Flare Tool for 1/2 in coaxial cable

Andrew 31670-2
*Round Member Adapter Kit, 10 Pieces 2-3"

Andrew round member adapter kit, 10 pieces, 2-3".

Shure A89M-PG
Rycote Pistol Grip Mount

Developed by Shure with Rycote, this adjustable handheld mount works with VP89S and VP89M End-Address Shotgun Condenser Microphones.Patented Lyre technology provides excellent isolation against handling noise. A soft feel grip is molded into the clip to prevent the microphone from twisting or slipping.

Andrew 204673-4
4" Wall/Roof Feed Plate, 4 Openings

Multiple entrance wall/roof feed-thru plate with (4) 4” (102 mm) openings.Use with the corresponding size rubber cable boots (sold separately). Dimensions Height 241.30 mm | 9.50 in Width 647.70 mm | 25.50 in General…

Andrew HJ7-50A
1 5/8" HELIAX® Standard Air Dielectric Coaxial Cable

HJ7-50A, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

Neumann EA1
Shockmount (Nickle)

The EA 1 spider shockmount is designed for the TLM 103, TLM 102, TLM 127, TLM 193 and M 147 Tube microphones. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Nickel color.

Myat 301-023
90 Degree Elbow Flanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

ERI ACX050-10SE
90 Degree Elbow Flanged 7/8"

7/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Formerly Part Number: 1060A.

Andrew A5E78-S
7/8 in EIA for 7/8 in AVA5-50 and AVA5-50FX

7/8in EIA Flange connector General Specifications • Interface 7/8 in EIA Flange • Body Style Straight • Mounting Angle Straight Electrical Specifications • Connector Impedance 50 ohm • Operating Frequency Band 0 – 5000 MHz • Cable Impedance 50 ohm • 3rd Order IMD, typical -116 dBm @ 910 MHz • 3rd…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

Audio Technica AT8484
ShockMount for the BP40 Broadcast Microphone

Main Features: • Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts. • Inner shock mount ring rotates to engage ball bearings that lock microphone in place. • Compatible with 5/8"-27 threaded stands. • Designed to be used with the BP40.

Andrew 31768A
*Standard Angle Adaptor For Cable Hangers, 10 Pcs

These Andrew adaptors are designed for mounting 3/8" to 4" cable hangers to angle tower members and include attachment hardware for standard hangers. 10 pieces.

Andrew 31769-5
*Hardware Kit For Hangers, 3/4" Bolts 10 Pieces

Hardware Kit of 10 stainless steel fillister-head bolts,3/8" lockwashers, and nuts for attachment ofhangers to drilled tower members. 3/4" bolts; 10 pieces.

Andrew AVA7-50
1 5/8" HELIAX® Andrew Virtual Air™ Coaxial Cable

AVA7-50, HELIAX® Andrew Virtual Air™ Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket Construction Materials Jacket Material PE Outer Conductor Material Corrugated copper Dielectric Material Foam PE …

Andrew HJ8-50B
*3" HELIAX® Standard Air Dielectric Coaxial Cable

HJ8-50B, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 3 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

Rode PSM1
Shock Mount for Podcaster And Procaster Mics

The perfect suspension shock mount for the Procaster or Podcaster, the PSM1 provides isolation from external vibrations which can translate as low frequency noise or manipulate the microphone position. The PSM1 gives you confidence when using your microphone in environments where there is any…