ProCo Sound MC2
Microphone Combiner, Two Mic In - 1 Mic Out
MC2 with 2 female XLR ins, 1 male XLR out with input polarity reverse switch.
Call for availabilityGalaxy Audio JIBY
Y Splitter
Galaxy's Jack-in-the-Box model #JIBY is an XLR splitter. It allows you to split a single microphone feed to two different inputs, like a powered monitor and a mixer. Phantom power circuitry prevents interference from two different phantom power sources.
Call for availabilityRDL ST-PH1
Stereo Phono Preamp
The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…
Call for availabilityART USBPHONOPLUSPS
Phono - Line Preamp w/USB
The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…
Call For AvailabilityGalaxy Audio JIBC
XLR Combiner
Galaxy's Jack-in-the-Box model #JIBC is an XLR combiner. It helps you add an additional microphone input to your recording equipment or PA system mixer when all the inputs are already in use. The JIBC permits phantom power to go to both microphones if available from the console.
Call for availabilityART SPLITCOMPRO
2-Way Mic Splitter / Combiner
Get two devices in one with the SPLITCom Pro. It effortlessly splits or combines balanced low impedance microphone signals as needed.As a splitter it provides one direct-coupled output and one isolated output from a single microphone. You can send the direct output to the main or FOH mixer and the…
Call for availabilityProCo Sound MS3
Mic Splitter, 1 Mic Input to 3 Outputs
The Pro Co MS3 is a 1-into-3 microphone splitter. Use it for splitting the signal from a low-Z microphone between 3 mixers. Female XLR-type input and 2 male XLR-type outputs (Direct and Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-2 transformers (150 ohm 1:1:1).
Call for availabilityRolls MS20C
Splitter Combiner and Isolator
The MS20c Splitter / Combiner / Isolator will split a single balanced XLR signal into two isolated signals, combine two balanced XLR signals together into a single, or simply isolate a balanced line for buzz or hum elimination. Please note that when combining two condenser microphones, phantom…
Call For AvailabilityART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)
The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…
Call for availabilityAudio Technica AT8681
Unimix Mic Combiner
The Audio Technica AT8681 UniMix is a 2 in, 1 out mic combiner. It uses a balance control to adjust level or relationship between the 2 mic inputs. Input and outputs are via XLR connections. The unit has permanently fixed flange-mounting brackets for surface mounting under consoles, desks or the…
In StockRolls PB223
2 Mic Phantom Power Box
The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.
Call for availabilityCondre PIRANHA
CD/DVD Disc Destruction System
The Condre Piranha permanently destroys sensitive data stored on CD or DVD R media to ensure that information cannot be read, even by sophisticated forensics platforms. Destroys 15 discs per minute. 100 disc input hopper.
Call for availabilityART PHANTOMIIPRO
Dual Phantom Power Supply
The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…
Call for availabilityWhirlwind SPLITTER1X2
Mic Splitter, 1 In 2 Out
Splitter1X2 provides one low impedance XLR input to two low impedance XLR, transformer-isolated outputs with separate ground lifts.
Call for availabilityWhirlwind SPLITTER1X3
Mic Splitter, 1 In 3 Out
The Whirlwind SP1X3 provides one direct and two transformer-isolated outputs (all Male XLR) from a mic level input (Female XLR). Each transformer-isolated output features a ground lift switch. The direct output always has a connected ground. The direct output is a straight through connection from…
Call for availabilityRolls VP29
Stereo Phono Preamp
The VP29 is a great low-priced turntable preamp, for connecting phono-level turntables with line-level equipment. Features: RCA inputs/outputs; convenient single stereo 1/4" TRS output; AC adaptor included in U.S. models.
Call for availabilityRolls PB224
* Phantom Power Supply
The PB224 Dual Phantom Power Plus provides phantom power for two condenser microphones. The voltage supply circuits are completely redesigned, offering a rock-solid 48 volts of clean phantom power. The PB224 also now sports a vastly improved molded plastic battery compartment for powering by two 9…
Call for availabilityProCo Sound MS42A
Microphone Splitter
MS42A has 4 channels with single female XLR input and 2 isolated XLR male outputs. Output ground lift switches.
Call for availabilityMackie M48
48v Power Supply
The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance.…
Call For AvailabilityRolls PB23
Phantom Power Supply
PB23 provides 12 or 48 V DC phantom power. PB23 includes AC/DC adaptor.
Call for availabilityRDL FP-MPA2
Microphone Phantom Adaptor
The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied…
Call for availabilityWhirlwind MICPOWER2
Portable 48V Phantom Power Supply
The Whirlwind Micpower 2 (MICP2) is a premium stereo phantom power supply. Its regulated 48 Volt DC output is ultra quiet, introducing no noise into the microphone's signal path. The Micpower 2 is conveniently portable, operating on four long lasting AA batteries or on AC when desired, by…
Call for availability