Products, Splitters and Combiners, Phantom Power Supplies, Preamps, Test & Service Equipment, Microphone Accessories, Turntables, Broadcast

Whirlwind TESTER
Cable Tester

The original Whirlwind Tester easily checks for shorts, bad connections, and accommodates XLR, 1/4" and phono plugs. It easily fits in your tool box. 9-volt battery required.

ProCo Sound MC2
Microphone Combiner, Two Mic In - 1 Mic Out

MC2 with 2 female XLR ins, 1 male XLR out with input polarity reverse switch.

Galaxy Audio JIBY
Y Splitter

Galaxy's Jack-in-the-Box model #JIBY is an XLR splitter. It allows you to split a single microphone feed to two different inputs, like a powered monitor and a mixer. Phantom power circuitry prevents interference from two different phantom power sources.

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

Galaxy Audio JIBC
XLR Combiner

Galaxy's Jack-in-the-Box model #JIBC is an XLR combiner. It helps you add an additional microphone input to your recording equipment or PA system mixer when all the inputs are already in use. The JIBC permits phantom power to go to both microphones if available from the console.

ART SPLITCOMPRO
2-Way Mic Splitter / Combiner

Get two devices in one with the SPLITCom Pro. It effortlessly splits or combines balanced low impedance microphone signals as needed.As a splitter it provides one direct-coupled output and one isolated output from a single microphone. You can send the direct output to the main or FOH mixer and the…

ProCo Sound MS3
Mic Splitter, 1 Mic Input to 3 Outputs

The Pro Co MS3 is a 1-into-3 microphone splitter. Use it for splitting the signal from a low-Z microphone between 3 mixers. Female XLR-type input and 2 male XLR-type outputs (Direct and Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-2 transformers (150 ohm 1:1:1).

Rolls MS20C
Splitter Combiner and Isolator

The MS20c Splitter / Combiner / Isolator will split a single balanced XLR signal into two isolated signals, combine two balanced XLR signals together into a single, or simply isolate a balanced line for buzz or hum elimination. Please note that when combining two condenser microphones, phantom…

Dorrough RW100
Remote Control For Dorrough Meters

The Dorrough Remote Control RW-100 is now compatible with all models of Dorrough analog and digital meters. RW-100 Remote Control connects with up to four meters providing access to all meter functions. Button legends on the top apply to analog meters and legends on the bottom apply to digital…

ART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…

NTI DR2
Digirator Digital Audio Signal Generator

The NTI Digirator DR2 is a reference grade digital audio signal generator with transformer balanced AES3, S/PDIF, TOS-Link and ADAT outputs. It offers a comprehensive set of audio test signals and surround sound test sequences for verification and adjustment of professional Dolby Digital, Dolby E…

Mackie MTEST-1
Cable Tester

Never play the guessing game with cables again. Featuring a simple 5-way switch to test every pin, even with mismatched connectors, the battery-powered MTEST-1 is an essential tool to have in your bag for every gig. You can even manually test continuity between any two points with the included…

Audio Technica AT8681
Unimix Mic Combiner

The Audio Technica AT8681 UniMix is a 2 in, 1 out mic combiner. It uses a balance control to adjust level or relationship between the 2 mic inputs. Input and outputs are via XLR connections. The unit has permanently fixed flange-mounting brackets for surface mounting under consoles, desks or the…

CAIG D5S-6
DeoxIT Contact Cleaner Spray 5 oz.

5% spray DeoxIT contains a fast-acting deoxidizing solution designed for use as a general treatment for connectors, contacts, and other metal surfaces. More than a contact cleaner, DeoxIT chemically improves electrical connections.

NTI AL1
Handheld Acoustical Analyzer

The NTI Acoustilyzer AL1 is a handheld sound level meter and acoustic analyzer for measuring and monitoring sound pressure levels, room acoustics and speech intelligibility STI-PA. Its blend of electrical and acoustical functions, combined with computer connectivity, makes it an indispensable tool…

CAIG G5S-6
DeoxIT GOLD Contact Enhancer Spray 5 oz.

DeoxIT GOLD spray contains a unique conditioning solution designed for use in criticalapplications where only slight cleaning action is necessary. It is intended foruse on new and recently cleaned surfaces only.

RDL ST-NG1
White & Pink Noise Generator

The ST-NG1 is the ideal choice where random white or pink noise is needed. It is suitable either as a reference noise source for audio measurements or as a masking noise source in engineered sound or counter-intelligence applications.Amplitude limiting circuitry in the ST-NG1 controls extreme peak…

Rolls PB223
2 Mic Phantom Power Box

The PB223 is capable of powering two phantom powered microphones with either 12V DC or 48V DC. Since it uses a 100 kHz switching power supply there is no audio noise generated. It also has an output pull down resistors so it will work with any mixer and has 2 DC jacks so several units can use one adaptor.

Potomac SD31
High Output RF Frequency Synthesizer

The Potomac SD-31 Synthesizer-Detector is a high output crystal signal generator of precisely known frequency combined with a sensitive, selective detector for RF bridge measurements of AM antenna impedance. Packaged in a single light-weight battery-powered unit, the SD-31 complements bridges such…

ART PHANTOMIIPRO
Dual Phantom Power Supply

The ART Phantom II Pro is a dual-channel phantom power supply that provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. It features innovative low power circuitry that generates the higher voltage necessary for powering microphones…

Whirlwind SPLITTER1X2
Mic Splitter, 1 In 2 Out

Splitter1X2 provides one low impedance XLR input to two low impedance XLR, transformer-isolated outputs with separate ground lifts.

NTi MR-PRO
Minirator Signal Generator

The MR-PRO is a powerful analog audio generator that gives you a full range of analog test signals, including Sine waveforms, sweep signals, white noise, pink noise and more. With its rotary settings wheel, fast access function keys, a backlit LCD, illuminated mute button, safety hand strap, jack…

RDL ACM-3
AM Noise Monitor

RDL's ACM technology is the only time-proven, industry accepted method of controlling Synchronous AM Noise (the elusive FM transmission bandwidth variations that aggravate multipath artifacts in listeners' receivers). Hundreds of top performing FMs in every major U.S. market turn to ACM technology…

Whirlwind SPLITTER1X3
Mic Splitter, 1 In 3 Out

The Whirlwind SP1X3 provides one direct and two transformer-isolated outputs (all Male XLR) from a mic level input (Female XLR). Each transformer-isolated output features a ground lift switch. The direct output always has a connected ground. The direct output is a straight through connection from…