Windtech CM21
Video Hot Shoe Mic Clip
The Windtech CM21 "hot shoe" shotgun clip fits most standard video camera hot shoe mounts. A locking nut holds mic clip in place. Adjustable microphone angle with adjustment screw. Fits mics with shaft diameter of 21 mm.The CM21 fits the following shotgun mics: AKG C568, CK61, CK62, CK63, CK68…
Call for availabilityAudio Technica AT8411
Tie Clips for AT831 And AT803
The Audio Technica AT8411 is the replacement clothing clip for the AT831 and AT803 lapel microphones. It attaches to the mic via plastic semicircle clip. This clip is designed for quick attachment and release.
In StockCountryman ECLT
Two-Ear Clip for E6 / E6i Earsets (Tan) Mic on Left Side
The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…
Call for availabilityAudio Technica AT8417
Tie Clip, Wire For AT831 And AT803
The Audio Technica AT8417 is the replacement tie & lapel clip for the AT831 and AT803 lapel microphones. It attaches to the mic via a firm wire loop. This clip is a more secure attachment for prolonged or active usage.
Call for availabilityCountryman ECLB
Two-Ear Clip for E6 / E6i Earsets (Black)Mic on Left Side
The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…
Call for availabilityElectrovoice 320
Stand Clamp For RE20 / RE27ND
Stand clamp for the Electro-Voice RE20, RE27N/D, and N/D 868, black.
In StockArrakis MLC-006
70’s Rock Xtreme Music Library
Arrakis Master Library Collection of 70's Rock (approximately 915 songs) on DVD-R disc for Arrakis automation products. Ripping, processing, compressing, and setting data on music is time consuming and expensive. And because today's rippers and compressors are so much better than just a few years…
Call for availabilityART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)
The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…
Call for availabilityStanton SMX202
2-CH 10" Compact DJ Mixer (120V)
The SMX.202 features a simple design that makes it easy to get up and running quick, whether mixing vinyl or CD.Main Features:• Sturdy All Metal Construction for Extreme Use • 2 Line and 2 Phono Inputs • 2 Band EQ and Gain Control per Channel • Cue Section Features Cue Level and Cue Pan • Mic Input…
Call For AvailabilityART USBPHONOPLUSPS
Phono - Line Preamp w/USB
The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…
Call For AvailabilityMackie PPM1012 12Ch Powered Mixer
12-Channel, 2x250 Watt PA Mixer
The Mackie PPM1012 powered PA mixer features 800W + 800W peak Class-D Fast Recovery power amplifiers, a full eight mono mic/line channels (each with 3-band Perkins EQ and sweepable mid), as well as two stereo mic/line/RCA channels (both with 4-band Perkins EQ).The PPM1012 also boasts two 32-bit…
Call for availabilityArrakis MLC-007
80‘s Country Xtreme Music Library
Arrakis Master Library Collection of 80's Country (approximately 1,039 songs) on DVD-R disc for Arrakis automation products. Ripping, processing, compressing, and setting data on music is time consuming and expensive. And because today's rippers and compressors are so much better than just a few…
Call for availabilityRycote 037306
Medium Hole Camera Clamp Adapter Mount For Softie
This medium hole (21-22mm) mount features a Camera Clamp Adapter (CCA) thatoffers an effective solution not only to boom pole mounting, but also allows a Softie mount to be attached to a variety of cameras and camcorders via the microphone clamp.
Call for availabilityElectrovoice SAPL-3
Microphone Stand Adaptor For PL37
Fits the Electrovoice PL37 mic like a proverbial charm.
Call for availabilityRDL ST-PH1
Stereo Phono Preamp
The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…
Call for availabilityWindtech SMC7
Spring Type Mic Clip (Black)
Spring clamp type clip fits a wide variety of mics. Adjustable angle; brass insert with 5/8-27 threads.
Call for availabilityArrakis MLC-009
80‘s Pop Xtreme Music Library
Arrakis Master Library Collection of 80's Pop (approximately 1,118 songs) on DVD-R disc for Arrakis automation products. Ripping, processing, compressing, and setting data on music is time consuming and expensive. And because today's rippers and compressors are so much better than just a few years…
Call for availabilityArrakis MLC-008
80’s CHR & AC Xtreme Music Library
Arrakis Master Library Collection of 80's CHR and AC (approximately 1,400 songs) on DVD-R disc for Arrakis automation products. Ripping, processing, compressing, and setting data on music is time consuming and expensive. And because today's rippers and compressors are so much better than just a few…
Call for availabilityWindtech MC11
Slim Style Mic Clip (Black)
Heavy duty clip for slim mics (.8 to 1 in diameter). Adjustable angle; brass insert with 5/8-27 threads.
In StockWindtech SP-25
Shockmount Mic Clip 25mm (Black)
This ingenious low cost shock mount is exactly what you need to reduce noise when you are doing interviews or have mics set up for live performances. Put one in your gear bag for each of your handheld microphones. Features: vibration-free shockmount for virtually any application; reduces low…
Call for availabilityYamaha EMX2
10ch Powered Mixer, 2x 250W
Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's…
Call For AvailabilityMackie PPM608 8Ch Powered Mixer
8-Channel, 2x150 Watt, Powered PA Mixer
The lightweight yet rugged Mackie PPM608 powered PA mixer features 500W + 500W peak Class-D Fast Recovery power amplifiers, six mono mic/line channels and two stereo mic/line/RCA channels (each with 3-band Perkins EQ).The PPM608 also boasts a 32-bit RMFX+ processor, featuring 24 effects with tap…
Call for availabilityArrakis MLC-002
40‘s, 50’s & 60‘s Hits Xtreme Music Library
Arrakis Master Library Collection of 40's, 50's and 60's Hits (approximately 1,047 songs) on DVD-R disc for Arrakis automation products.Ripping, processing, compressing, and setting data on music is time consuming and expensive. And because today's rippers and compressors are so much better than…
Call for availabilityNeumann DS120
Stereo Bar Mount For Standard Mic Clips
This stereo mount has a 150mm long support bar with two movable 1/2" threaded studs. Two microphones in their mounts can be attached. Any space or angle between the microphones is freely adjustable. It sports a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.
Call for availabilityArrakis MLC-013
80's & 90's Christian Xtreme Music Library
Arrakis Master Library Collection of 80's and 90's Christian Hits (approximately 1,026 songs) on DVD-R disc for Arrakis automation products. Ripping, processing, compressing, and setting data on music is time consuming and expensive. And because today's rippers and compressors are so much better…
Call for availability